"It's okay, I've taught myself some English, there's nothing wrong with translating this kind of thing, if you're sure, then don't say it, if you're not sure, I can help." Duan Yun Zhengse said.

"That'...... I'm sorry for you. Cheng Qingyan hesitated and said.

For Cheng Qingyan, translating so many drawings into English is definitely a nightmare, and with her translation speed, although she should be able to complete the task within a week, it will take a lot of energy.

In addition, Cheng Qingyan has been busy with the assembly, production and debugging of the powerful shot peening machine recently, and she really doesn't have much time to do this, so although Cheng Qingyan didn't want to trouble Duan Yun for help, she finally chose to leave all the translation work to Duan Yun alone.

"It's not troublesome, anyway, I usually don't have anything to do in the unit, rather than being idle, it's better to take this opportunity to improve my English level." Duan Yun said with a smile.

In fact, Duan Yun has already calculated in his heart, with his translation level, among these enterprises under the Light Industry Bureau, it should be regarded as the highest, especially the oral level, he is absolutely confident, after all, in the years of studying for a doctorate in his previous life, he had a lot of exchanges with foreign students in the school, this kind of experience and environment is not available to college students in this era, not to mention those secondary school students who attended the conference today.

In today's state-owned enterprises, this era of promotion pays attention to academic qualifications and qualifications, although Duan Yunye's diploma can be promoted step by step in the future, but it always has to stay up for a few years, if he can become a translator of the Light Industry Bureau this time, and then have the experience of going abroad, his promotion speed will definitely be much faster, which is predictable!

In addition, the credit must be clear, if he and Cheng Qingyan translate together, his credit will definitely be divided equally, but if he does it independently, no one will take the credit.

It is precisely because of this that Duan Yun offered to help Cheng Qingyan translate her part of the drawings.

"Xiao Duan, Xiao Cheng!"

At this moment, there was a wave of greetings from behind.

When the two of them heard this, they turned their heads and found that it was two classmates from the same class at Night University who called them.

"Sister Ma, Uncle Qiang. Duan Yun greeted with a smile.

These two classmates are both about thirty years old, and like Duan Yuncheng Qingyan, they are also from the same unit, from the 3528 factory.

The name of the person who is called Sister Ma is Ma Hua, and the person who is called Uncle Qiang is called Liu Qiang, and he is mainly engaged in propaganda work in the factory.

"Hey, you're all out, I was looking for you just now. At this time, another middle-aged man walked over.

Duan Yun took a closer look and found that the person who came was Fan Linong from the meat factory, who was also a classmate of the night university.

There were five students who came to the Light Industry Bureau to attend the meeting this time on Chinese New Year's Eve, which Duan Yun and Cheng Qingyan did not expect before.

In fact, it is not difficult to understand, after all, college students are rare these days, and it is normal to be pulled over by the unit when encountering such a meeting.

Subsequently, the five people left the Light Industry Bureau together on bicycles.

After Duan Yun and Cheng Qingyan finished the meeting, they didn't have to go to work in the afternoon, they could go home directly.

On the way, several people talked and laughed, and also talked about the translation tasks arranged by the bureau.

From talking with the other three, I learned that the English level of the three of them is not high, and this time they all took over the translation work hard, mainly because the temptation to go abroad is too great, in case there is no master, there may be a chance for the short man to pull the general.

This couldn't help but make Duan Yun secretly relieved, it seemed that there were not many English masters in the meeting this time.

However, it is still very pleasant to chat with these classmates, despite the age gap between each other, these older students in the class are still quite outgoing, and they are quite happy to communicate with each other.

Back at the factory, after Duan Yun and Cheng Qingyan separated, they rode back home quickly.

After entering the house, Duan Yun immediately took out the drawings and materials in the data bag and looked at them.

Just after flipping through a few pages, Duan Yun understood the general data of the equipment in this part of the information.

Just as the label on the file bag is 'Press B-5', this machine is one of several stamping machines on the automotive production line.

The stamping machine can be said to be the most important equipment in the automobile production line.

According to a piece of information that Duan Yun has seen in his previous life, in the automotive industry, the proportion of stamping parts used in trucks is about 45% to 55%, and that of cars and large trucks is 60% to 76%, which shows how important stamping machines are to automobile manufacturing.

Before the liberation, only a few small factories in Shanghai, Tianjin, Yingkou and other places in China produced small-tonnage manual or pedal open presses, with outdated structure, extremely backward technology, and low output.

It was not until the sixties that there was a 160-ton closed double-point press in China, and at present, many domestic manufacturers use this tonnage forging press.

However, this equipment is obviously unable to keep up with the needs of the times, with the progress of automobile technology, the new type of car needs a forging press with greater power tonnage, and there is obviously no corresponding equipment in China.

For example, the frame of non-load-bearing driving, the most critical thing is two girders, which need to be cold-pressed by a 2,500-ton press.

However, domestic automobile factories do not have such a high tonnage stamping machine for one-time molding, so some manufacturers creatively use two 300-ton presses, a 25-ton press, a total of three hydraulic presses, continuous cold pressing, although it can also be formed, but the production quality and efficiency of the finished product is much worse than that of foreign automobile manufacturers.

However, the information Duan Yun got was a 3,000-ton automobile longitudinal beam stamping hydraulic press.

This 3000-ton automobile longitudinal beam stamping hydraulic press adopts a new four-column six-tie rod structure, from the introduction, this press has good strength, small deformation during work, strong anti-eccentric load capacity, and low cost.

In Duan Yun's view, this hydraulic press is a very backward design, but in the current country, it is undoubtedly a relatively advanced thing, if the price is right, the introduction is undoubtedly very suitable.

Just looking at some of the information of the equipment, Duan Yun already had some ideas in his heart.

Subsequently, Duan Yun began to translate the more than 100 pages of drawings and materials.

As Duan Yun expected, many technical terms in this English drawing material are indeed very cold, if Duan Yun hadn't been exposed to a lot of foreign language materials when he was studying for a doctorate in his previous life, I am afraid that he would really not be able to accurately understand and translate this kind of word.

It only took more than an hour for Duan Yun to translate seven pages of information, and according to this efficiency, it is estimated that this more than 100 pages of information will be enough in one or two days.

However, Duan Yun does not plan to simply translate the original text this time, and he also plans to use his knowledge of stamping machines to make a more detailed technical note for these data drawings, so that relevant engineers can better understand the construction principle and performance of this equipment......