After dealing with the affairs of the security department, Duan Yun returned to the office building.

As soon as he entered the main building, Duan Yun saw that the new factory rules that he had had put on the wall of the Propaganda Department yesterday had been torn down again.

Duan Yun had only arranged for people from the security department to guard the factory and the propaganda board at the entrance, but no one was in charge of the new factory rules in the office building, so the announcement here once again became the target of some people's anger.

However, Duan Yun didn't think so, because he would soon have a new move.

After returning to the office, Duan Yun once again summoned people from various departments for a meeting.

This time, Duan Yun waited in the conference room for half an hour, and the directors of various departments came in total, counting the secretary of the factory and the leaders of the trade union, there were only eleven people attending the meeting.

"I'm going to announce something to you today. After Duan Yun took a sip of tea, he said into the microphone: "There was a theft in the workshop warehouse last night, and the security section was stolen, and after the inquiry, he was a regular worker in the factory, and I have fired this person......

When Duan Yun said this, the conference room was in an uproar.

You must know that the state-owned enterprises in this year are no better than the private enterprises in later generations, and the dismissal of workers is a major event, which must be studied and discussed by the workers' congress.

There has never been a dismissal of workers from the big collective before, there was stealing things in the factory in the first two years, and in the end it was only a fine and punishment, even if it was a habitual offender, he was not fired, and the factory director Yuan Xuedong often did not come to work, when he was the shopkeeper, and the management of the security department was chaotic, it was completely a decoration, so all the time, no one took stealing things in the factory seriously, of course, there were not many things that could actually be stolen in the factory.

Duan Yun directly fired this person, which was a great shock to the several factory leaders present, they didn't expect Duan Yun to fire a regular worker in the factory so decisively, and he didn't discuss it with them at all.

"Manager Duan......" At this time, Jiang Jianhua frowned, interrupted Duan Yun's words, and said: "Isn't your decision a little too hasty, stealing things from the factory is really wrong, but is your punishment decision too much, just punish and educate for petty theft, and if you want to fire a regular worker, you have to go through ......"

"Petty theft? This kid stole a half-finished piece worth more than a thousand yuan, do you think this is petty theft?" Duan Yun asked with a frown.

"How many things are stolen from the factory, after all, our own affairs in the factory can be completely solved with our internal mediation...... Jiang Jianhua said.

"Do you know how many years you will be sentenced to stealing more than 1,000 yuan of state-owned assets? There are regulations in the factory that workers who have committed major violations of the law must be dismissed! I didn't directly transfer him to the public security organs, which can be regarded as mercy!" Duan Yun said to Jiang Jianhua with a serious face.

"It's not as serious as you say......"

"Secretary Jiang, please make your position clear before you speak! You can't exonerate the criminals and act as a protective umbrella for these people! This time, the people who have been arrested have already written a confession, what does it mean that it is not that serious? Are you a member of the judicial organs, how can you say that the matter is not serious? Are more than 1,000 state-owned assets not taken seriously in your eyes?" As Duan Yun spoke, he took out the confession letter that the army had returned to him, patted it in front of Jiang Jianhua and said: " Take a closer look at this confession, there are signatures and handprints in black and white, don't say that I am untrustworthy!"

"Are you ......" Jiang Jianhua was choked speechless by Duan Yun's questioning, and could only stare at Duan Yungan.

"After the factory rules of our factory are formulated, they must be strictly enforced, and those who make mistakes must be punished, and there is no room for negotiation and accommodation in me!" Duan Yun glanced at the others present, and said: "Today, the task of each department is to weed and pull soil in the factory area to clean up, I know that some people want to find an excuse not to come, it doesn't matter if you don't come, you go to work to see the mood, then I can also look at the mood when the salary is paid at the end of the month, my words will be put here, the meeting is dismissed!"

After Duan Yun finished speaking, he got up and left the conference room.

In his original intention, Duan Yun didn't want to have a tense conflict with Jiang Jianhua, but as far as the current situation was concerned, he couldn't show even a trace of weakness in front of these people.

First impressions are very important, especially as a leader, the impression you give to your subordinates in the early stage is difficult to change later.

If Duan Yun chooses to make some compromises at this time, then Jiang Jianhua and his gang will definitely think that the pressure on Duan Yun will be effective, and in the future, these people will definitely intensify their use of this non-cooperative method to make Duan Yun make more compromises.

Duan Yun has been tough from the beginning, and now he can only be tough to the end, and there is no second way to go, otherwise, he can only obediently return to the main factory to accept punishment.

Leaving the office building, Duan Yun walked straight to the workshop with the revised drawings last night.

At present, it is impossible for Duan Yun to devote all his time and energy to fighting wits and courage with the leaders of the organs, and he must also start to start production.

After entering the workshop, Duan Yun began to arrange workers to repair and maintain the machine.

Then hand over the drawings to the technicians in the workshop, let them draw the drawings for backup, and in the afternoon, they will bring a copy of the drawings to the various workshops of the main factory, so that the main factory can help process the modified machine tool workpiece.

Duan Yun expects that it will take at least nearly a week to complete the processing of all the workpieces, and make the CNC gear hobbing machine and automatic lathe.

Compared with these two kinds of technical transformation that have been applied in the main factory, Duan Yun also needs to make a new piece of equipment, that is, a gear grinding machine.

The so-called gear grinding machine is a gear processing machine tool that uses a grinding wheel as an abrasive tool to process cylindrical gears or certain gears (helical gears, bevel gears, etc.) to process the tooth surface of the tool. It is mainly used to eliminate deformation after heat treatment and improve gear accuracy.

At present, there are two grinding machines in the workshop of the labor service company, and Duan Yun can completely convert these two grinding machines into gear grinding machines, and Duan Yun can also add CNC functions in the later stage.

The gear hobbing machine of later generations can generally process the accuracy of the gear to 1~3 levels, and stabilize the gear above level 3, but considering the current technical conditions and components, Duan Yun is expected to only make a gear grinding machine with a machining accuracy of about five grades.

The main factory does not have the equipment of gear grinding machine, that is because the main factory has been producing agricultural machinery gearbox gears, the accuracy of this gear is in 6 to 8 levels, with the milling machine and lathe in the workshop of the main factory, it is completely possible to process the gear of this precision, there is no need to use the gear grinding machine.

The reason why Duan Yun wanted to modify the gear grinding machine this time was because he wanted to complete a plan that he wanted to realize at the head factory, that is, to produce automobile transmission gears with an accuracy of more than 5 levels!

Remember the mobile version URL: