What does this result mean, Peng Chuan and Master Cen glanced at each other, and they both saw incredible joy in each other's eyes, but the next moment the two of them calmed down in unison, and Master Cen took the lead and said: "Let's not be happy too early, in this way, the big guys will work hard today, work overtime, and make a few rivet molds, and then report to the factory director tomorrow to see the results." ”

"Master Cen has a point, I won't leave today. After listening to Peng Chuan, he was the first to express his support.

Xiao Sun and Da Liu wanted to go home early, but the master spoke, and a few of them as apprentices couldn't say anything, so they all stayed to help.

It was another period of busy work, according to Zhuang Jianye's simple to extreme improvement process, several people made four rivet molds of the same specification before they went back to rest.

Wait for the next day to work, several people gathered early to the foundry workshop of the sixth branch factory, the four rivet molds made last night were assigned to the station, all day down, the four rivet molds ran on the station no less than a thousand times, but none of them were damaged, as for the finished rate of rivets to not be as perverted as yesterday, there was a little waste, but the 0.27% scrap rate still reached the lowest level of similar products in the six branches.

Seeing this, Peng Chuan and Master Cen had the bottom in their hearts, so they stopped talking nonsense, and rushed to the factory headquarters of the sixth branch factory in both directions.

At the same time, the office of the director of the factory department of the sixth branch.

Shen Jianwei looked at the documents just sent from the main factory with a complicated mood, the factory is going to launch two refrigerator production lines, and is ready to inspect and evaluate several branches with poor efficiency, so as to determine the location.

The sixth branch factory happens to be one of the few branches with poor efficiency.

As a branch of Yonghong Factory, the only memorable thing about the Sixth Branch is the martial arts during the special period, and because of this, after the chaos was rectified, many cadres and workers in the factory had some emotions about the Sixth Branch.

Shen Jianwei is the same, after all, he was knocked down because of the sixth branch, but after resuming work, he still took the initiative to ask Yinglai to preside over the work of the sixth branch, for no other reason, just because the casting workshop of the sixth branch is the best among all the branches, and because of this, the sixth branch is the only branch that can produce aviation-grade rivets in addition to the precision casting workshop of the main factory.

Although Shen Jianwei didn't have a good impression of the Sixth Branch's behavior back then, it was a few people's wanton behavior after all, and it had nothing to do with the main body of the Sixth Branch.

So he came to the sixth branch factory and carried the beam.

The first two years were not bad, Yonghong Factory, as a national defense and military industrial enterprise, had a steady stream of orders for military products, and the life of the Sixth Branch, which mainly produced aircraft rivets, was quite nourishing.

However, with the deepening of the reform of the armed forces and the gradual transformation of the factories to civilian products, the No. 6 branch factory, which mainly relied on military products, began to go downhill.

At the same time, military and civilian production is a dead task, there are no bonuses, no benefits, front-line workers and technical personnel do not like to work, and under the low enthusiasm, production efficiency will naturally not go up, so the production situation will further deteriorate.

In the face of this situation, Shen Jianwei doesn't think that there is a problem with the branch factory system, the factory has been doing this for so many years, and the workers are the masters, why was it prosperous in the sixties and seventies, but now it is not good?

Quite simply, there was something wrong with the policy of the main plant.

The transformation of civilian products has impacted the unique spirit, spirit and spirit of national defense and military enterprises, and caused confusion in the minds of cadres and workers.

Shen Jianwei is responsible, but more confident, consciously found the root of the disease and immediately responded to the main factory, hoping that the factory can return to the original track and continue the former glory of Yonghong factory.

The result can be imagined, the main factory ignored his suggestion at all, and continued the established policy, so Shen Jianwei was angry, the main factory didn't pay attention to it, well, I made an appearance in the sixth branch factory for you to see, who is right and who is wrong.

With this in mind, Shen Jianwei began his road of reform, in which the independent improvement of the rivet mold process is part of this ambitious reform plan.

However, reform is not something that can be completed as soon as the upper lip touches the lower lip, Shen Jianwei is not short of energy, but he lacks outstanding vision and the ability to change, and will only hold on to the past experience to the end.

As a result, military products were regarded by him as the main product, but the enthusiasm of the cadres and workers in the factory was seriously dampened.

As a result, capable workers and technicians were transferred out of the No. 6 branch factory one after another and thrown into the arms of other branch factories, and this time the No. 6 branch factory fell to the bottom, and a series of production problems followed, and even the military products that Shen Jianwei was defending were also in trouble, and the efficiency was even more ugly.

Shen Jianwei wanted to cheer up, but he didn't know where to start, and it wasn't until he received the documents from the head office today that he suddenly found that the sixth branch factory had reached a precarious point.

Could it be that his reform ideas are wrong?

Holding the document in his hand, Shen Jianwei asked himself, how could it be wrong that he had been like this for the past 20 years? But if it was right, how could it be like this?

Shen Jianwei was puzzled, and finally simply slapped the document on the desk and leaned back in the chair.

At this moment, Peng Chuan and Master Cen knocked on the door of the office, Shen Jianwei didn't blink his eyelids, so he called someone in, Master Cen was the first to break in, and he didn't even look at Shen Jianwei's tired face, so he shouted excitedly: "Factory director, the rivet mold is completed, and our process has been improved." ”

Shen Jianwei, who was still depressed, didn't listen to Master Cen at all, opened his eyes tiredly, and looked at Master Cen with a suspicious face smiling like a chrysanthemum.

"Director Shen, our rivet mold technology has been successfully improved, the original 600 times of life, now more than 1,000, the yield rate is as high as 98.5%, further tests are still being done, conservative estimates of 2,000 times of life should not be a problem. ”

Seeing Shen Jianwei's dazed face, Peng Chuan hurriedly added, this time Shen Jianwei understood it, and in just a moment, his tired and dazed eyes rejuvenated, and the whole person bounced up from the chair: "Really, has such a good effect?"

"It's true, from yesterday to today, the two of us have been following, it's true. Master Cen replied with a serious face.

"Great, that's great, quick~quick~~ take me to see it. Shen Jianwei suddenly became more excited than Peng Chuan and Master Cen, and pulled the two out of the factory and went straight to the workshop.