In the blink of an eye in August 2002, another company was established in Zhuji City, it is the predecessor subsidiary of Zhuangtai Company, called Knight Engineering Ceramics Co., Ltd., this company is a little special, even the name is a little foreign, Net, it specializes in the production of gaskets, sealing rings, silicon carbide, silicon nitride, mechanical seals, hardware and mechanical accessories of the professional company.

The company has put a lot of effort into gaskets, seals and hardware fittings, and can basically meet the needs of the store market.

In the past, the store was all together to find gaskets in the east, to find accessories in the west, to find seals in the south, not to mention to find silicon carbide and silicon nitride in the things, sometimes there is not necessarily a spot supply, but also to order, in this way, it affects the assembly of the product, no accessories can not be assembled, have to wait until the other party to make it, in order to assemble the product for delivery.

Since there is this large company specializing in the production of this kind of products, the people in the store have less troubles, what kind of seals, sealing paste, what kind of gaskets, what kind of silicon carbide, what kind of silicon nitride, can get the goods quickly, no longer have to wait for others to make it.

And he is a specialized production line, the machine is much better than the small workshop of those sealing machines, the small workshop of the machine is often too high, there is a phenomenon of burning pots, some of the rubber ring is made of black and scorched, just like the burnt thing, some sealants are attached to some burrs, with a small pile that is not clean, so that they have to pick out one by one, carefully remove the plush around the rubber ring, one or two cents of things, it is not a taste, you say a few words, others will say, this is the fault of the machine hair removal is not clean, one by one and there are not so many manpower, say a few more words, others will not be willing to sell to you in the future, say that you talk a lot, one or two cents a sealing ring, only earn two or three cents, and so much nonsense, they have not done a good job, but they have become an uncle, ignore it, and say that the store produces gaskets, and there are few small processing plants for sealing rings, this thing has a thin profit, and few people are willing to do it.

Since there is this professional company, their professional production line, there will be no small workshop with burr sealing ring, not to mention the phenomenon of burning pots, their machinery is fully automated, the temperature has a regulator, to the specified temperature, will automatically turn on the machine, the pot in the plate of the rubber ring to remove, and then gently shake, the attachment inside will fall to the ground, the sealing ring is round and bulging, clean and neat, without a little burr, not to mention a series of problems in the pot, in this workshop there has never been this phenomenon。

Their machines are imported, hundreds of thousands, the machines of small workshops are domestic, tens of thousands, which can not be compared at all, the domestic ones do not have temperature regulators, not to mention, even the template is not exported smooth and bright, the inside is full of potholes, with a magnifying glass, it is simply a big pit and a small pit, unsightly, but you use a magnifying glass to look at the template of the imported machine, it is still smooth and bright, the same as the mirror surface, not even a spot will appear.

The sealing ring poured out of the small workshop, around the round sealing ring, there will always be some fine pits, and the sealing ring made by the imported machine, in addition to no burrs, can not find a fine pit around the round rubber ring, it is smooth, smooth and smooth, bright gloss, there is no fault at all, but the selling price is one and a half times higher than that of the small workshop. But then again, it's worth the money, and the quality of others is far above yours, so it's not expensive.

Like other gaskets, they are obviously much better, in addition to the gaskets produced in the Knight factory without burrs, and the gaskets are smooth and smooth, the color is bright, the color is consistent, it is flawless. Although the flatness of the gasket in the small workshop is guaranteed, there will always be some flaws on the face of the gasket, not a small pit, but a small adhesion on it.

Other silicon carbide and silicon nitride are made of ceramic special materials, which can be used as high-temperature resistant spindles, and high-temperature heat-resistant connections.

This is customized in the case of gas and high-temperature material plants, and each plant can process with supplied materials. After all, there were relatively few electrical materials at that time, such as carbon brazing heaters were not popular, and later there were infrared heaters, gold tube heaters, galvanic heaters, high-frequency heaters, etc., these materials are inseparable from high-temperature resistant heads synthesized by silicon carbide. With this technology, there is a broader way out for the future market.

Silicon nitride is widely used in high-temperature bearings, which is often involved in high-speed rotating machine spindles, so this technology is of great help and promotion to the development of automation in China, and provides more powerful help for future social development.

Zhuji Zhuangtai Feed Co., Ltd. was established as early as 1998, of which Meichi Grain and Oil Industry and Trade Co., Ltd. was established on December 15, 1992, and later Zhuangtai Group's subsidiary Knight Engineering Ceramics Co., Ltd. was established on August 13, 2002, followed by Kaimi Electronic Technology Co., Ltd. was established, which is a manufacturer of automotive electronic devices, computer fingerprint identification IC card, fingerprint password lock, hardware and mechanical spare parts, established in Zhujiawu.

On April 19, 2016, Zhuji Yulong Special Material Technology Co., Ltd. was established, and on December 7, 2017, Zhuangtai Group Co., Ltd. was established.

The founder, Chen Weijiang, started in the grain, oil and food processing industry in the early years, from 1992 to 98 years to establish Zhuangtai Feed Factory, six years to achieve a leap. Then in 2002 four years, from a grain and oil and feed processing enterprises, jumped to a sealing ring and ceramic products of the special engineering company, four years later stepped out of the grain and oil industry, choose to develop on the road of industry, he not only stood firm, but also made remarkable achievements, after 14 years, has set up an electronic center and special materials as the center of the enterprise, he not only produces and sells feed, but also manufactures feed production equipment and accessories for sale.

Because Chen Weijiang has such a majestic strategy, he later became a very powerful Zhuangtai group company in Diankou, and he can be regarded as the No. 1 bigwig-level figure in Diankou.

Let's talk about it, Mo Wenquan has established a new industrial zone in Meichi, with many factories, the new area is in full swing to recruit enterprises to station, the people of Meichi have already selected their own plants, and they have made a choice one by one, who does what product processing, which company to help make spare parts, etc., have made detailed planning, some machines have been sent to various plants, for installation, less than half a year, this Meichi New Area will be in full swing, that is, in the spring of 2003, Meichi New Industrial Zone will enter production and operation。

······