This is also something that has to be done, after all, a person's energy is limited, and it is simply impossible for anyone to be as well-rounded as him.

Guo Hao named the names of the four genius employees and asked them to go to the screw production workshop with everyone.

These four talented employees are a few of the early batches, all of them are female employees, and their majors during this period are somewhat related to the production of screws.

Leaving the talented employees who studied on their own, Guo Hao and his party walked outside.

They didn't have to walk for many minutes to reach their destination.

The screw production workshop is located inside the steel factory, so it is very close.

This is also Guo Hao's consideration of the relatively close raw materials, that is, the steel used to make screws can be produced in the steel factory.

So put the production workshop here first, as for what to do in the future, whether to build another factory, then we will talk about it later.

Entering the workshop, several genius employees took a look at the equipment, and there was no need for Guo Hao to say more, they all knew that it was used to produce screws.

Guo Hao didn't say anything and began to check the production line.

After walking around, he found that the equipment was installed very well.

The equipment here is basically installed according to his requirements, and the fact that it can be installed so well shows that the quality of the employees in the steel factory is still very good.

They came to the drawing, well, the drawing-screwing workshop.

They changed into the work clothes prepared here, the work clothes are actually warm clothes, and the brushed workshop is a refrigerated car surface, and the temperature inside is relatively low.

After watching the lattice workshop for a while, Guo Hao asked Tan Xiaohua to start work, well, it was to start the production line and prepare for the production of threads.

The central control room of the entire production line is in the latched workshop, and Tan Xiaohua gave an order in the central control room, and the production line began to operate.

After a trip to the island country, Guo Hao knows how people produce screws.

In fact, to put it bluntly, there are a few points.

One is the material, I am a steel factory here, and the material is very simple, which is not a problem.

The second is to have a low temperature when drawing the screws, which is not a problem, it is easy to solve, and it is enough to install refrigeration equipment.

The key lies in the third point, which is the issue of precision.

Precision is the key point of never loosening the screw, and the error must be controlled within a very small range.

To what extent is it precise, it can be said that if you cut this thread from it, you can see the gap between the screws, as if you were cutting a piece of steel.

There are many examples of such precision, such as a steel block in some research institutions, this steel block looks normal, the surface is very flat and smooth, it is just a steel block, but the middle surface of the steel block can be raised into a few words.

Among them is the precision inverter, which must be tightly sealed, so that there can be no large errors. (The technical stuff is the author's imagination.,Friends should watch a lively ha.,Forgive me)

Now the screws that Guo Hao wants to produce are almost like this, and the nuts and screws must be tightly fitted.

The nuts and screws are produced separately and must be very precise to achieve a perfect fit.

The key to this is the drawing equipment, which must also be very precise, to ensure that the error of the pulled out screws is controlled at the micron level, otherwise it will not be able to produce qualified products.

However, such a drawing equipment cannot be produced in Huaxia.

Guo Hao came today to find a way to improve the drawing equipment.

About half an hour after the production line started, the first screw product was produced.

Tan Xiaohua took the screw handed by the employee and looked at it, this screw is a bit strange, a little different from ordinary screws, the screw in her hand seems to be able to drive into a wedge.

But she didn't think about it so much, and said to Guo Hao: "Chairman, this screw is very exquisite." ”

Guo Hao didn't say anything, took the screws and looked at them, and measured them with qigong by the way.

His qigong is also very accurate in measuring data, which can reach the micron level.

After he measured it, he handed the screw to a genius employee: "Xiao Shang, you take it and measure the specific data." ”

This genius employee named Xiaoshang took the screws and said, "Okay, teacher." ”

Xiao Shang and a few other talented employees went to the side to measure the data, and the measuring instrument was here, but it was not a very accurate instrument.

We don't have high-grade measuring instruments in Huaxia, and steel factories can't buy such instruments.

In this way, the data measured here will be about 10 microns different from the actual data.

Of course, Guo Hao won't worry about anything, he just wants to measure it, and he can get accurate data without a measuring instrument, what the dormitory brothers said, he is not a human being, hehe.

After a while, Xiao Shang brought the data.

She gave the data sheet to Guo Hao: "Teacher, the data is out." ”

Guo Hao took the table and looked at it, and said: "From the data, we can know that this screw is not precise enough, in this case, the screw and the nut cannot be perfectly twisted together." ”

Tan Xiaohua was stunned: "Such delicate screws are not precise enough?"

Guo Hao: "It's not precise enough, such screws are easy to loosen after a long time, the products we want to produce, we must keep improving, otherwise they are unqualified." ”

If it will be loose, it cannot be called a screw that will never be loosened, it can only be regarded as a high-level screw, and it is naturally an unqualified product.

At this time, the genius employee named Xiaoshang spoke: "Teacher, judging from the data, the product is more than 20 microns different from the requirements, but I feel that the difference is only more than 10 microns. ”

Guo Hao was stunned, because he knew that what Xiao Shang said was very correct, but the measuring instrument should not be able to measure such data.

He asked Xiao Shang strangely: "Xiao Shang, how did you come to such a conclusion?"

Xiao Shang: "I don't know why, but I've always been very sensitive to data, and I can often estimate more prepared data, which is a kind of intuition, and I never miss it." ”

Of course, Guo Hao believed what Xiao Shang said, because he trusted her.

He said to Xiao Shang: "Xiao Shang, I didn't expect you to have such a talent, come on, your achievements in the future are definitely very good." ”

Xiao Shang was a little embarrassed, she didn't expect the teacher to trust her so much, and she encouraged herself.

She said: "Thank you, teacher, in fact, as long as we learn from you, we all think and believe that we will become first-class scientists." ”

Guo Hao knows a lot of things, it is very difficult to learn Guo Hao's knowledge, there should be no such person in this world, hehe.

Of course, the meaning in Xiao Shang's words only refers to the knowledge of science and technology, excluding Guo Hao's other identification, painting, cooking, martial arts, medical skills and so on.

However, even if you only refer to science and technology, it is impossible to learn one-tenth of it.

The knowledge of science and technology is also very massive, Guo Hao knows a lot of knowledge, he can be sure that ordinary people, at most he can learn one percent of his own knowledge, he is really terrible, what the dormitory brothers said is not wrong, he is indeed not a human person, hehe.

In fact, Guo Hao really wants to find more geniuses to learn from him, and hundreds of them are not too many, so that it is possible to pass on a lot of knowledge to them and make them all useful scientists.

Of course, this can only be done slowly, there are too many students to teach themselves, and now people don't necessarily trust themselves very much.

Only by teaching a group of students and making a name for themselves can I find more gifted students.

In addition, there is another reason, I can't openly recruit such gifted students, because what I learn here is confidential information, which must be kept secret.

Therefore, I can only ask Mr. Li to help, they have a wide range of channels, and they can select students from all over the country.

I don't want to do so much, Guo Hao still has to do things.

He said to Xiao Shang: "Study hard." "Then walk to the stretching machine and start adjusting the data.

The production of the production line is also computer-controlled, so it is relatively simple to adjust the data.

Of course, it wasn't enough to just adjust the data, he also removed the threaded slider and carefully polished it.

He grinds it by hand, there is no way, he can't find other machines that can polish, after all, it's a micron level thing.

The head slider is very hard, and the general method can't be polished at all, Tan Xiaohua next to them all shook their heads secretly, they thought in their hearts that Guo Hao was doing useless work.

In fact, how did they know that Guo Hao is not a human being, his strength is terrifying, and he can slowly polish his head with just a little abrasive cloth or rag.

After polishing for a while, he put the slider back on, and then asked Tan Xiaohua to order the employees to continue production.

After a while, a few more screws were produced, well, this time Guo Hao meant a few more, which was more representative, so a few more were produced.

Needless to say, after he took a few looks, Xiao Shang took the screws and went to measure.

After measuring, she handed the data sheet to Guo Hao: "Teacher, the data is still about the same, but I feel that it seems to be closer to the data requirements, and it is estimated that there is only an error of about ten microns." ”

Guo Hao: "Your feeling should be accurate, I'll try a few more times." ”

He knew that the error was actually about eight microns, but he secretly admired in his heart, Xiao Shang's intuition was really terrifyingly accurate, well, she was almost like herself, and she became a person with extraordinary abilities.

Tan Xiaohua and the others looked at a few screws repeatedly on the side, and they all looked exactly the same as the one at the beginning, without any difference, they were all so exquisite.

But they didn't say anything, anyway, Guo Hao did the right thing, and he believed in Guo Hao, hehe.

Guo Hao continued to adjust the data and polish the slider.

After grinding, the slider is installed, a few screws are produced, and then Xiao Shang and the others continue to measure the data.

Next, they kept repeating something similar.

When it was time for dinner, they didn't stop researching, and they didn't prepare for dinner for the time being and continued to do things.

At about half past eight in the evening, they finally produced a batch of qualified screws.

This also shows that Guo Hao and they can already produce this kind of screws that will never loosen, indicating that they have succeeded.