Now Huaxing Group Company will train a large number of technicians every year, a steady stream of fresh blood for themselves, and the entire group company in mechanical engineering technology has been the domestic first-class, perhaps compared with those in Europe and the United States for a hundred years of husband heritage is still worse, but in CNC and intelligence has caught up with or even in the local lead.

It is precisely with a large number of experienced technicians in all aspects that Yang Jie does not have too much to worry about the R&D center producing high-precision firearms.

These barrels and receivers are to be phosphated, and these surface treatment technologies have been done very well by the companies under Huaxing Group Company, and Yang Jie saw that the surface phosphating treatment of these treated parts is very beautiful, which is not inferior to the surface treatment of similar firearms abroad.

He then went to the production hall of the buttstock, which was designed by the R&D center for both laminated plywood and high-density engineering plastics.

In order to cope with different use environments, the R&D center uses composite materials made of different wood boards to make the buttstock, and if solid wood is used, it will crack in some cold areas, so laminated plywood is used here.

The plastered planks are used on a copy milling machine to produce the stock of the gun, and these blanks are also polished and shaped by the hands of the senior technician – sometimes the smallest parts that cannot be processed by the machine need to be processed by the worker, and the tubular receiver needs to be mounted to the stock for comparison and fine polishing.

These senior carpenters have a wealth of experience, and have been engaged in carpentry skills before, and they are all masters who are obsessed with carpentry skills, and the butts made are extremely exquisite.

These stocks are painted and cushioned, and then sent to the assembly hall for assembly.

The stockstock, which uses high-density engineering plastics, is injection molded with a precision mold, and the inside is made of a one-piece aluminum alloy frame, which is durable and resistant to deformation.

Because the mold is very precise, although it is matte, the grainy distribution on the surface is very uniform, which shows the superb processing technology.

Yang Jie then came to the assembly workshop, the workshop for assembling sniper rifles is less than ten people, it is said to be a workshop, in fact, it is more like an office, each technician has its own independent work area, many tools are hung on the partition, and you can also see the color map and process standard manual of this JY01.

These process manuals have specific and detailed process standards for the assembly of each component, and a large part of the standards are formulated with the help of engineers from foreign high-precision sniper rifle manufacturers.

After all, these manufacturers in Europe and the United States have incomparably rich experience in this area, and Yang Jie also spent a lot of money to invite retired engineers from these manufacturers to help guide him, and established a set of extremely detailed standard manuals from beginning to end.

The most important thing is to establish such a set of standards, with which the quality of the sniper rifle can be guaranteed from beginning to end.

The various components produced on the production line are gathered here, and each sniper rifle needs to be assembled and adjusted by these technicians by hand.

In order to maintain the accuracy of the assembly, the temperature and humidity here are controlled within a reasonable range, and the inspection tools are also deliberately placed in the freezer to minimize the error.

Technicians need to constantly use special tools to fine-tune these moving parts, the force of the trigger, the firing pin force of the firing device, the level and baseline of the wedge-shaped guide built into the upper receiver, the force and error of the bolt unlocking and locking must be fine-tuned, and there are professional test tools for inspection and testing, especially the sniper rifle of the wooden support needs to be adjusted.

After the assembled sniper rifles are assembled, they will be sent to an indoor shooting range for testing, and the test will be conducted by a retired sniper recruited by the Huaxing Group of Companies, who is proficient in firearms.

In the room where the test was designed, soundproofing was laid around it, and a target could be seen 100 meters away.

"Yang Shao......"

When the sniper saw Yang Jie and the others coming in, he also hurriedly got up.

"It's okay, I'll come and see the shooting test of the sniper rifle. Yang Jie said with a smile.

Yang Jie also put on earplugs after saying a few words to the sniper, and the sniper also started the shooting test after putting on the earplugs.

He held his breath as he aimed at the test target 100 meters ahead with the optical sight on it, and then pulled the trigger -

Bang!!!

The recoil of the sniper rifle caused the sniper's body to vibrate, and Yang Jie also felt the hot air sprayed from the air outlet on his face.

The sniper fired three specialized supersonic bullets in quick succession before dropping his rifle.

His test session was recorded by the camera next to him, and the trajectory of the bullet's flight was also recorded by the high-speed camera next to him.

Yang Jie then also observed the moving target, and the impact points of the three bullets were very close to each other in the central ring, almost overlapping.

He also measured it carefully with a caliper, and the accuracy reached 0.4 arc minutes!

Seeing this achievement, Yang Jie also showed an incomparably bright smile on his face: "Not bad, not bad! Our sniper rifle can achieve this result is indeed very remarkable!"

Lu Yonghua and others were also full of smiles on their faces, in fact, last week, the sniper wanted to sniper rifle to hit such a result, which also made everyone in the R&D center ecstatic.

Yang Jie didn't rush to see the shooting test this time, but carefully inspected it from beginning to end, and finally came to the indoor shooting range, Lu Yonghua and others knew that he had extremely high requirements for everything, and he didn't dare to report the good news.

After all, the German DSR-1 sniper rifle has been reported in some German firearms magazines, and this rifle can achieve an accuracy of less than 0.2 arc minutes when combined with competition-grade ammunition and favorable environmental conditions!

And Yang Jie has invested so much in the R&D center, aiming at the world's most accurate sniper rifle, and the accuracy of the R&D center's design and manufacturing can only reach 0.4 arc minutes, so Lu Yonghua and others are also worried that the boss will be unhappy.

The shooting accuracy of the domestic imitation sniper rifle can hit a 70 cm spread at a distance of 500 meters, which is suitable for the accurate hitting of the sniper rifle, and it cannot be regarded as a sniper rifle at all, and it is even inferior to the M16A4 rifle, the accuracy of M16 can be scored within 4 arc minutes, and the SVD of Lao Maozi can play an accuracy of 2 arc minutes when loading special sniper bullets.

Now the R&D center can produce such a high-precision sniper rifle is indeed very exciting news, if it is replaced by other military factories in China, this is explosive news, and it may be on CCTV news.

But the boss is aiming at the accuracy of European and American firearms, and Lu Yonghua and they are all walking around Yang Jie's requirements, and the boss's dissatisfaction is the most important thing.

"It's really remarkable to be able to achieve this accuracy, and this time I'm going to give you a bonus out of my own pocket!"

Yang Jie said with a smile.

Lu Yonghua and the others all showed a look of surprise.

In the evening, Yang Jie also listened to the reports of various departments of the R&D center, and he was quite satisfied with the progress.

"The accuracy of 0.4 arc minutes is what makes our R&D center enter the ranks of manufacturers of high-precision sniper rifles, but there is still a gap compared with these old firearms factories in Europe and the United States, we are facing the police equipment market, especially in the face of some bandits taking hostages, our products must ensure that the bandits are killed at a distance of several hundred meters without harming the hostages, so the accuracy must be improved again. ”

Yang Jie said: "I know that this is a systematic project, and the propellant, bullets, firearms, and sighting equipment must be at the highest level to ensure it, so I asked all departments to participate in the joint research and development." ”

He paused and said: "I set you a goal, that is, the guns produced will improve every two years, I hope that the accuracy of the guns produced in 04 will be improved to 0.3 arc minutes, 06 years to 0.2 arc minutes, and 08 years to 0.2 arc minutes." ”

Yang Jie's gaze swept over everyone's faces: "Do you have confidence in this goal?"

"Yes!" Chen Haitong and the others shouted excitedly.