Can't fit in!

I really can't fit it in!

The Il-76 has a cargo exit height of 3.45 meters, but the interior is not as high.

The width of the cargo compartment is 3.4 meters.

It stands to reason that these processing centers can be stuffed in, but there are wooden boxes on the outside, so they can't be stuffed in at once.

These machining centers are all about the same height, mainly in width and length.

"Dismantle! Dismantle all the outer packaging, if the outer packaging is not removed, remove the protective cover of the machine tool inside. Xie Kai gritted his teeth and said, "Put the four-axis one in first." ”

Comparatively speaking, the role of four-axis machining centers is greater.

"That way, it's easy to be seen. Wang Guilin was a little worried, "This is not a military airport. ”

"Let the container truck tail face the cargo hold of the plane, and the two sides are blocked by container trucks. Xie Kai said. "There can't be any problems with this batch of equipment. ”

"The cargo hold of the 10th cannot be loaded. Wang Guilin reminded Xie Kai that he also knew how urgent the base was for a multi-axis machining center. "I can only wait until tomorrow night to come back. ”

"That's it. Anyway, we're not worried about it. Xie Kai nodded and said.

After adjusting the plan, Xie Kai asked them to install a few four-axles first.

The Il-76 has two clamshell hatches at the bottom of the rear fuselage, and the middle wall that opens downward can be used directly as a cargo bridge, so that the opening of the container can be facing the cargo hold, and the equipment can be pushed into the cargo hold directly by pushing.

It's much easier than the previous loading and unloading.

Hu Chengfu did it himself, a group of manpower was also large, and the equipment weighing several tons was pushed to the cargo bridge in this way, and then the outer packaging was removed directly on the cargo bridge, and the large telescopic loading and unloading springboard inside was used to move in, which was very fast.

"They want dollars for money, and they will go to Kaisheng to account for it, and this batch of equipment will be settled directly into Kaisheng's account when they go back?" Wang Guilin asked Xie Kai, "The professional manager of Kaisheng has a lot of words about the accounting issues between Kaisheng and us, and is ready to check the accounts......

"They want to check the accounts, the boss didn't speak!" Xie Kai saw that Wang Guilin was not joking, and nodded, "It's over here, I'll go there......"

"What's going on here?" Wang Guilin really didn't know what Xie Kai was doing in Shanghai.

Xie Kai told him about the garment factory, and Wang Guilin frowned when he heard it.

This matter involved Liu Xu's family again, and he couldn't say anything for a while.

"Uncle Wang, why don't you have a hard time going to this matter? After all, as the management of 404, you directly reported to the industrial and commercial department here, which is much more effective than me. Xie Kai didn't want to face his aunt and uncle.

I don't even want to get in touch with them.

The old lady knew that it was unreasonable in this matter, but she had to consider family affection, Xie Kai himself was too ruthless in this, and his mother would feel uncomfortable if she didn't say it on the surface.

Wang Guilin came just in time, and his mother and them still had room to turn around.

"Let's talk about this later. Let's meet the people who sold us CNC machines. Can they really get the five axes?" Wang Guilin came for the five axes.

Xie Kai didn't say anything else, and took Wang Guilin towards Mao Wenfeng and Tan Lin, who were guessing Xie Kai's true background in shock in the crown next to him.

After some greetings, Wang Guilin went directly to the point and asked if the other party could provide a five-axis linkage CNC machining center.

"Director Wang, the five-axis machining center, Batumi is very close, and the production of each system is counted in the ......" Tan Lin was a little embarrassed, "The four-axis one is relatively easy to do." ”

"What if we don't want a system?" Xie Kai asked.

The role of five-axis CNC machining center for many parts in the aerospace field is completely irreplaceable by hand.

With these things, the accuracy of the important parts and frame structure parts of the super ten and super seven is easy to be guaranteed, and the production cost will be reduced by a large part.

Relying on manual production, the efficiency is not good, the quality cannot be guaranteed, and the scrap rate is unbearable.

"Don't want a system?" Tan Lin's eyes widened, "CNC machine tools don't have a system, so they don't work at all." ”

"Of course, we don't want the system, we just don't want the control system, transmission parts, servo motors, sensors, etc., which are definitely still needed. Those are no different from those used on ordinary CNC machines. Xie Kai said.

Wang Guilin looked at Xie Kai suspiciously, the core of the CNC machine tool is the control system, without the system, it is useless to get it back.

"If so, it should be possible, but there is no guarantee. Tan Lin said cautiously, "I suggest you don't do this, there is no control system, the mechanical part of the five-axis machine tool is not even as good as the ordinary machine tool." ”

Tan Lin is not proficient in this, at least he still understands it.

"Yes, we want this thing, we don't have the core control system, it's useless. The price of a CNC machine tool, just a control system, can account for one-third or even higher of the entire CNC machine tool!" Wang Guilin was puzzled by Xie Kai's thoughts.

"If you really need it, we'll figure it out. Tan Lin looked at Xie Kai, he didn't know which of the two was in charge.

I started to worry that Xie Kai would not give money, and I am still worried.

Things were taken away by domestic planes, and where they were transported, I don't know.

"It's almost loaded over there, let's get the rest back to the warehouse first, and then we'll come back tomorrow night. Xie Kai saw that the shipment in the distance was almost over, and the Il-76 cargo hold could not transport 12 machining centers at a time.

"There were only five of them. All four four-axles were installed. Zheng Quan has been watching from the sidelines.

When it comes to the four-axis machining center, there is no one from the airport involved, and Wang Guilin coordinates through the above relationship, let alone a problem.

The huge Il-76 closed its cargo door and soon burst into the dark night sky, indicated by buoys that opened on both sides of the runway.

"What do you want to do with those five-axis machining centers that don't have a system? Although our base is researching CNC systems, four-axis is not very easy to solve now. Wang Guilin returned to the hotel and asked Xie Kai what he thought.

"Uncle Wang, hasn't the research on the numerical control system been stagnant over there?" Xie Kai asked.

Wang Guilin nodded, "If you are stagnant, you can't buy these useless things, right?"

"There are more solutions than difficulties. The previous research was stagnant, on the one hand, the basic technology was too poor, whether it was the transmission system, servo motor, sensor, etc. On the other hand, the unit we cooperate with has been unable to provide machine tools that can be used for multi-axis linkage. With this thing, we have an experimental platform on the basis of systematic research. Xie Kai explained.

Wang Guilin immediately understood Xie Kai's thoughts, "Are you planning to get the experimental platform from them?"

"Yes, with the experimental platform, our research will progress faster! It's still you young people who live in their heads. Wang Guilin slapped his head suddenly.

Xie Kai looked at him, knowing that this old man was just trying to comfort himself.

It's not that they can't think of it, it's that the focus is different.

If it weren't for the last resort, Wang Guilin and Zheng Yucheng would have the same idea and would not want to get involved in these manufacturing fields.

In their thoughts, even if it is to make guns and cannons, it is more effective than building machine tools, otherwise, Zheng Yucheng and they would never agree to sell the CNC system they have researched in their hands to other units for 30 million.

"Actually, many people have thought of it, but they don't have a chance to get it, we can be regarded as lucky, who would have thought that someone could provide it?" Xie Kai sighed.

It was also an accident to meet Tan Lin and them this time.

"It's not a big luck, after all, Zheng Hao's job is this. It is better to be able to settle with them in China, so that it will be easier to settle the bill. Wang Guilin was a little worried.

At present, in the entire 404, only one cooperative unit with Kaisheng can provide foreign exchange.

The company is headquartered in Xiangjiang and produces in China.

A lot of the money ends up at headquarters, otherwise these operations would not have been possible.

Even so, now because of the need for more and more foreign exchange, Kaisheng company is operated by professional managers and other teams, and it is easy to have problems in the accounts.

Especially for the settlement with the domestic 404, Kaisheng needs to pay the processing fee of 404, and the processing fee cost is extremely high, which makes the management team very dissatisfied.

However, Liu Dongsheng, the boss of the entire company, went to Ukraine again, and he couldn't see anyone all day.

"Foreign exchange is a serious problem, and there are still too few companies that can earn foreign exchange in our hands. Xie Kai nodded, "By the way, Uncle Wang, can Minister Yang send a financial team to help Kaisheng do the accounts when the time comes?"

"You ......" Wang Guilin was stunned.

Xie Kai took the initiative to hand over his most core things to the base's financial team.

In the end, he shook his head, "Forget it, this thing can't be done." Yang Qian and the others accepted that many things became more troublesome. ”

"Let them help make the internal accounts, and the external accounts will be handed over to the financial team over there. Now Kaisheng's finances are in turmoil. "Xie Kai, this is also something that there is no way to do.

Finance is the core thing of a company, and if it is not absolutely trustworthy, it certainly cannot be handed over to them.

Kaisheng's finances, until now, if you don't want to solve it, will eventually let the international focus on it.

After all, a lot of fund transfers are paid directly through Kaisheng's holding company, and then 404 settles with Kaisheng in China.

In the past, when Liu Dongsheng was in charge of Kaisheng, it was not a problem, anyway, the money was Xie Kai's.

But not now, the professional manager manages, and he should pay 404 a large amount of money, but in the end, the other party said that the head office has already paid, and a small part of it ......

"Foreign exchange, the more you go to the back, the greater the demand, Zheng Quan's side is bartering, once foreign exchange comes in, it has to be supervised, and it is not easy to go out. The right to retain foreign exchange in our hands is again in the hands of the military. Wang Guilin was also very embarrassed.

Forex, 404 is also in short supply.