In the previous life, the open-pit mine was officially bankrupt in about 98 years, not only the open-pit mine, but also other coal mines in Fucheng have gone bankrupt and autocratic, more than ninety percent of the workers have lost their jobs, these workers have lost their jobs, and they can't find new jobs, and the economy of Fucheng collapsed in an instant.

This life is much better, the establishment of the special industrial zone has created too many opportunities to make money, everyone has more choices, in the past five years, there are more than 3,000 mining bureau workers choose to jump out of the original unit, they are better, and as the reform of Fucheng continues, new employment opportunities will increase, I believe they will make the best choice.

There are still five years to go before the open-pit mine goes bankrupt, and if the prosperous market in Fucheng can digest all these workers in these five years, there is no doubt that the tragedy of Fucheng in the previous life will disappear completely, and it will be perfect.

After Jiang Botao and these people left Fucheng, NORINCO Group returned to calm again, of course, this so-called calm means that they can finally work with peace of mind, and there will be no other cumbersome things to disturb everyone.

In the next six months, everyone's focus is to achieve the industrial production of "Exploration No. 1", although Liu Lang looks down on "Exploration No. 1", but after all, it is the country's first independent research and development of CNC machine tools, even if the servo system is not domestic, but the cost is still much lower than that of foreign imported products, as long as the realization of industrial production can obtain a large number of domestic orders.

No, now there are more than 200 orders, most of them are state-owned enterprises, in addition to them, there are three private enterprises also have orders, Wanhe Group bought five machine tools at one time, Gemei Air Conditioning Factory also bought two, and there is another company, it is actually Meidi Air Conditioning Factory, this company also wants to buy two.

Meidi air-conditioning factory is an air-conditioning factory in Guangdong Province, which has been established for three years, although the market share is not comparable with Gmei, but it is very recognized in some places in Guangdong Province.

In the previous world, Meidi air conditioning is also a well-known enterprise in the country, air conditioning, microwave ovens and other electronic products are at the national first-class level, in this life they were occupied by the Gemei air conditioning factory, the situation seems to be very bad, but don't forget, China's market is too big, there will never be a single company dominant, not to mention air conditioning, that is, computers, automobiles and other industries are also fiercely competitive, Gemei air conditioning is only temporarily occupying the first opportunity, how the future is not easy to say, the possibility of people catching up is not nothing.

Liu Lang will never suppress his domestic counterparts because of his own interests, on the contrary, he will encourage that if there is a company NORINCO Group is still powerful, of course, whether you can catch up depends on your own strength.

According to the price of 450,000 yuan per unit, the total price of these orders is close to 100 million, and the profit margin of each unit is 32 percent, which is very high, so as long as the production line is installed, there will be more than 30 million profits.

Many workers have long since begun to calculate how many shares they can share, and the calculated amount is frightening to death; if they do a good job, they can get more than 30,000 yuan a year at most, more than 30,000 yuan! What 10,000 yuan is a household? It is nothing at all; anyway, a new wave of getting rich is coming, and everyone is working at full speed.

Of course, the assembly line is not important, the important thing is to develop a new generation of CNC machine tools, which is the top priority, the country hopes to manufacture CNC machine tools with international first-class standards within five years, to achieve this standard in precision and alloy materials to make breakthroughs.

There is no big problem in terms of accuracy, Liu Lang now has several processes that can achieve an accuracy of 0.2 millimeters, which has reached the international standard, but the process should be built on high-quality materials, and no matter how good the process is, it cannot be achieved without high-quality materials.

NORINCO is not good at the smelting of alloy materials, it can't do it itself, the best alloy material development institution in China is Huaxia University, and there is the National Institute of Alloy Materials, which is responsible for the material research of the national large aircraft engine, Liu Lang obtained the precious materials from Kaminsky is handed over to them, if they can't study it, Liu Lang has to scold his mother.

Liu Lang stayed in Fucheng for half a month, half a month he had to give everyone a two-hour course during the day, teaching them new process methods, high-quality stainless steel is like waste paper Xi, even if everyone is used to this way or feel a little pity, this is too "loser", of course, this way is also the most skillful, just like what is the soldier practicing marksmanship? Isn't it just to keep shooting, when you seriously shoot 100,000 rounds or even 1 million bullets, your marksmanship will naturally be accurate.

In addition to teaching everyone "stunts", Liu Lang stayed in his office, not reading and studying, but lying on the bed to "close his eyes and recuperate", and lay down for two or three hours, from noon to dinner time, he was the first to rush to the canteen when eating, and the bowl that could hold three taels had to eat three bowls in a row, which was more than a worker who had worked for a day.

"Could it be that the boss has become a rice bucket?"

Everyone "slandered" Liu Lang in their hearts, this was one of the few opportunities they could "laugh" at Liu Lang, but no one was stupid enough to say this.

Of course, Liu Lang has not become a rice bucket, he eats a lot because of the excessive use of his brain, and the reason why he wants to use his brain more is to find a high-quality alloy material that can be smelted that meets the standards.

The material that Kaminsky gave him is very precious, it is the detailed parameters of seven high-quality alloy materials, including nickel-chromium alloy, aluminum-manganese alloy, titanium alloy, etc., these seven high-quality metal materials are not the final finished materials, just an intermediate material, in order to meet the standards of aircraft engines, further ratio tests are required, but with intermediate materials, the corresponding tests are much less, and now the research institute focuses on titanium alloys and chromium alloys.

This kind of test is to pass the continuous high temperature test, what kind of lattice is presented at what temperature, and what kind of properties it has, and the final result is to achieve the specified metal properties, such as can withstand 1,500 degrees of high temperature heat flow, the unit area can withstand the impact of hundreds of thousands of newtons, and so on.

This is a very complex test, the success depends on the ratio of the material and the forging, maybe a certain material one percent more or the temperature below a certain limit will have completely different properties, can only be tested a little bit, even if Kaminsky provides a detailed material, but the final product needs at least hundreds of tests to obtain.

NORINCO does not have the corresponding equipment, but fortunately, Liu Lang has an extraordinary brain, and his brain is sometimes equivalent to a large computer, and he can conduct virtual experiments after inputting the parameters he knows.

"Twenty percent of nickel-chromium alloys exhibit this property at a high temperature of 1,200 degrees, and fifteen.3 percent of titanium alloys exhibit this property at 1,400 degrees, and if two alloy materials are fused, this property will appear.........!"