Time enters the new year, and the Chinese people begin to prepare for the Spring Festival, which is joyful and peaceful.

Thanks to the incredible breakthroughs in recent years, Huaguo has done the most for the crisis of 08, with the least losses and huge gains.

So, the people of this land are optimistic and confident.

Only Gu Tao, Bao Jiaqi and others were a little shocked by the various movements in the Atubo world that broke out in just over a month.

The institutional, economic, scientific, technological, and cultural influence accumulated by the world hegemon over the years has exploded in a very short period of time, stirring up the emotions of hundreds of millions of people under various pretexts and issues.

The great turmoil that Gu Song said in the information actually came.

This is the first time that Gu Tao and others have personally convinced Gu Song's ability to "dream of the future".

They discussed and prepared in advance.

Knowing that it will only be those weak countries that will suffer, but Ami is sucking blood at a rapid pace and accumulating energy to deal with HSDA, how can Hua dare to relax?

After another long talk with Gu Song, various responses began to be initiated.

The means are so violent, of course, there will be a backlash against Ami.

What Gu Song has to do is to remind them of the aspects from which to start to expand the influence of this backlash, divide them, and gather more goodwill and alliance forces.

Today's China has preparation, technology, capital, market and future.

Later, it will depend on the direction of the situation and how Huaguo and HSDA maximize their own benefits.

As far as Gu Song is concerned, the thing he is most concerned about, the construction of the Flintstone Space City, can get the greatest support.

……

Currently, two micro-fusion experimental reactors are already working.

One is located at the bottom of a crater on the far side of the Moon, and the other, the flint space city in Earth's orbit.

At this moment, there have been some changes in the flintstone space city.

The solar panels, which had been enclosed in a ring, began to translate with the support trusses, revealing the saucer-shaped space station with the annular bulkhead installed, as if adding thickness to it.

It's already the largest man-made thing in space.

The diameter of the saucer-shaped space station has reached 100 meters, and the thickness has reached more than 20 meters. In the place where it turned out to be covered by solar panels, there are still a total of four robotic arms.

The exterior of the space station is impressively full of various guide rails.

At this moment, a module has just docked to the center of the dish station, blocked by a circle of solar panels.

The robotic arms began to move, slowly moving to the freshly docked module.

Various sensors such as optical lenses and laser ranging on the robotic arm begin to work, and under the movement of the robotic arm, the condition of the cabin after docking is carefully detected.

Then, the robotic arm starts working.

They're dismantling this segment.

If you look at the speed of the ground, this speed is very slow.

But in space, it's a bit of an incredible sight.

One by one, the robotic arms automatically dismantled the shell of a spacecraft nearly 20 meters long and more than 4 meters in diameter.

Its interior, unexpectedly full, was rolls of swarthy material.

After the robotic arm disassembles the shell of this section, after removing the various parts, the outer wall of the module also becomes a piece of standard material.

In the continuous labor of the robotic arm, the standard material that was originally turned into the bulkhead of the module sent into space is first placed on the guide rail in a planned way. The material moves, as if forming partitions, and from a bird's-eye view, it looks like a moving labyrinth.

The robotic arm's measuring sensors are apparently constantly measuring where they are placed in an effort to be precise.

Then, the rolls of material finally began to be peeled off, cut, and then placed in the right place, mounted, and fixed.

The outer wall of the 100-meter-diameter core cabin seems to be just a thin layer of material from this work site.

The materials sent by a core module, after several days and nights of sleepless work, only covered the bulkhead of the outermost layer, and by the way, formed some paths inside.

It looks like a shoddy tin model.

But it doesn't matter, in the Earth orbit, which is actually quite a safe space environment, this is enough for the time being.

The four robotic arms on the outside began to remove some materials from the inside of the original saucer-shaped space station, laying new rails on the surface of the newly covered outer wall.

The materials for the new compartment, including the shell and inside, have been depleted, but the interface is still there.

Once the outer rails were laid, the four robotic arms and the ring-shaped solar panel truss continued to move.

At the same time, a new module has completed the launch and is catching up with the flint space city, ready for automatic docking.

After it took a year to complete the first oblate cylindrical dish structure on the cruciform space station, it seems that the rest of the construction work began in this way.

……

On the ground, turmoil is only played out in some "peripheral worlds", and the big countries are still running as usual, with huge state apparatus dominating the functioning of entire societies.

However, the monitoring team specially established for the flint space city was dumbfounded to find that the flint space city was beginning to thicken.

The speed is ...... An average of 5 meters per week.

And so it goes...... By the end of the year, wouldn't it be a large cylinder with a diameter of 100 meters and a length of nearly 300 meters?

And in space, within a year, there will be an artificial creation on the scale of an aircraft carrier?

No one can sit still.

The first to rush out, of course, were the astronauts and the media's reporters.

After the appearance of voices with various purposes, Flint Aerospace also held a press conference cleanly.

"The reason why the first and second phases of the flintstone space city are temporarily closed for cooperative development is because the entire construction process of the city has been carefully designed. This construction process is supported by three massive sections. ”

"First of all, I would like to thank the cooperative enterprises that provide various materials, instruments and equipment for Flint Aerospace. All the materials and equipment needed to be produced on the ground first. ”

"Secondly, it is the stable and efficient space launch capabilities of Flint Aerospace and Huaguo Aerospace Science and Technology Group and Huaguo Aerospace Science and Industry Group, which can transport these goods to Flint Space City. ”

"The third is the space construction that everyone cares about. So far, we're doing well. At the press conference, Jian Yushu said lightly, "The entire Flintstone Space City, every step of its construction has been precisely designed, and a special space construction robot, a robot working environment and an artificial intelligence that controls the robot to carry out this special task have been designed for it." ”

"As for the problem of construction speed that everyone is concerned about, it is actually just a façade. At present, the flintstone space city, except for the part built last year, which has various supporting functional areas, the other parts are only laying the bulkhead of the core module. That's right, just bulkheads. ”

Jian Yushu looked at the expressions of the people in the audience and said with a smile: "It's really just a bulkhead." A huge space station that will support many people to work and live in it after it is designed, you can imagine how many pipelines, functional partitions, and instruments and equipment will be in it. So, maybe we can finish laying the bulkhead of the core module in a short time, but it doesn't mean that the flint space city will be completed so quickly. ”

"Our core module was not built all at once. The core modules of different parts have different functions and roles in the entire space city, and the construction procedures are also different. ”

"The length of the core module of this section is a total of 150 meters. We expect to complete the installation of all the outer bulkheads of this core section in August and begin internal construction. ”

Jian Yushu said this, and then said: "I saw that there are some media that call the flintstone space city a new space wonder. Thank you for your attention, support, and controversy, and Flintstone Aerospace will continue to invest money, time, and manpower to expand the boundaries of space capabilities. I believe that technology is still advancing, and that the construction of the Flint Space City may be getting faster and faster. ”

"So I think everybody has to get used to that. ”

Jian Yushu, who was rated by the media as having some cold style, withdrew after reading these contents briefly, and the press conference ended.

The construction progress of the flintstone space city has not been slowed down by the unwillingness of some people.

Unless this unwillingness is transformed into real action.

This kind of action is really coming.

Remember the mobile version URL: