Zhang Yu first opened the wire changing device of wire cutting, planning to change the wire first, and this kind of thing is not difficult for him at all, it only takes less than a minute to get it right.

The diameter of the newly replaced spark wire is the most accurate, and the machine and equipment parts made will not deviate.

On this wire cutting machine, there is still a large circle of old sparks to be replaced, which must be torn off, and pulling the sparks is also a waste of time.

At present, there is a method of rolling live sparks, but it is not suitable for this kind of wire, and it is not equipped here.

Yang Tang over there, knocking on the keyboard non-stop, look at his technique, ADC drawing skills are familiar, a gear diagram, according to the data given above, entered it, when entering, Yang Tang is also thinking about whether to change the spark, between which it is necessary to budget in advance, there is no budget, and the parts made are errors.

After thinking about it for a while, Yang Tang decided to change the sparks, which was an inevitable measure in order to pursue efficiency.

Zhang Yu smiled, it was naturally impossible to pull it directly with his hands, without the operation of the machine, Zhang Yu still had the use of Luban's craftsman.

His hands have become unusual, normally, even if he doesn't wear gloves, it's okay, but for safety, it's safer to wear gloves to pull the sparks.

The movements of Zhang Yu's hands were extremely fast, rolling according to the spark wire winding, and his speed could catch up with the speed of the upper cutting operation.

After a while, all the sparks were pulled down, and as for the next action of changing the sparks, Zhang Yu was not in a hurry.

This kind of wire-cutting machine, he has long wanted to improve the method, but because the effect improvement is not very obvious, so he didn't study it, after all, that little bit of efficiency doesn't play a big role at all.

However, now, it doesn't take much time anyway, he can improve it well, win Yang Tang, and solve the joint matter, which is the right solution.

There were originally tools in this machine, and after checking the situation, Zhang Yu improved the wire cutting in a few moments.

After Zhang Yu improved the machine, the action of changing the sparks was also done in one go.

"Chairman Zhang, the materials have arrived. ”

Yang Tang, who had drawn the drawings on the other side, shouted.

"Okay, you process it first, I'm ready to draw. ”

Zhang Yu answered, and then walked over.

Seeing that the materials in front of him were superimposed, Yang Tang directly used the machine to fix it, intending to process five at once.

This method is a very risky place, generally making machine and equipment parts, will first try to process a piece, and only after making sure that the data is okay, he will carry out the next processing.

From this point of view, Yang Tang is definitely a master of wire cutting, otherwise he would not be so bold, once the processing is in place, he must have already had a spectrum in his heart.

Zhang Yu opened the wire cutting program device, and did not enter the drawing device of the ADC. In addition to ADC drawing, the processing of medium wire also comes with a simple program drawing to facilitate the processing of some simple machine parts.

The two are almost the same, but in terms of making leads, there is a particular emphasis on it, and it is inconvenient to make a lead line by simply drawing a picture.

However, for this situation, Zhang Yu also has his own plans, he does not make external leads, and directly aligns the position with his hand, as long as the position can be aligned, it can naturally be processed normally.

This kind of hand-cranked technique will only be used for some rough processing, and the relative data is prone to large deviations, however, there are people like Zhang Yu who have Luban craftsmanship, which comes with a set of accurate data, and can accurately grasp the data without any deviation.

The wire cutting lead is the location of the wire cutting entrance, and the knowledge in this is only understood by people who have been in contact with this industry.

After Zhang Yu thought about it, Yang Tang over there had also replaced the sparks, replaced them with new processing fluids, and began to install materials and process them.

Zhang Yu's side was still carrying out his sharp operations in an orderly manner, and he was not in a hurry at all, even if he let Yang Tang process it first, he was sure to surpass Yang Tang.

Until all the programs are done well, only one time of data is needed, and then it can be processed, and after doing all this, Yang Tang looked at Zhang Yu's side.

At this time, Zhang Yu was still sorting out the materials, a big step behind Yang Tang, but when he saw this scene, he didn't dare to take it lightly, he always felt that Zhang Yu might have brewed some special plan.

Even if he was extremely confident in his processing machine, he would do all this in one go, Yang Tang shook his head, didn't think about it anymore, checked it first, and processed it immediately.

"The data is fine, processing. ”

After finishing the data, Yang Tang said to himself, adjusted the frequency of wire cutting, and pressed the processing button.

"Squeak squeak" wire cutting works and makes a special sound.

The sound of mechanical cutting was so harsh, yet so uplifting.

"Chairman Yang, one step ahead of me, this wire cutting is not as good as a milling machine, this time I am really going to lose. ”

Zhang Yu had just installed the machine, looked at Yang Tang with a smile and said loudly.

Listening to Zhang Yu's words, Yang Tang had a strange expression on his face, how could he think that as soon as Zhang Yu said this, he felt as if he had already lost.

"One step behind, get it, start the machine. Seeing that Yang Tang didn't speak, Zhang Yu got busy on his own, and after a while, his machine was also running.

"Chairman Zhang, don't you even check it?" Yang Tang saw that Zhang Yu didn't look at it, so he directly operated it and was taken aback.

"When I installed it, I had already seen it, and now it's up to me to see whose machine stops first. Zhang Yu wiped his hands with the rag on the table.

"Hmm. ”

Yang Tang responded lightly, and then chatted with Zhang Yu about the company's cooperation, and when it comes to this step, it doesn't matter if you win or lose.

In the process of getting along, Yang Tang has already regarded Zhang Yu as a friend, and agreed to the joint matter.

"Chairman Yang, it's really decided. ”

After listening to Yang Tang's willingness to cooperate, Zhang Yu's face was overjoyed.

It's a no-brainer, at least not so much for a master mechanic!

Everything was difficult at the beginning, and finally the first joint thing was completed, and with the golden signboard of Yang Tang, the subsequent negotiations will definitely be smoother and more.

"Of course, I Yang Tang said the same! I will never regret what I said, if Chairman Zhang is not at ease, we can sign the contract now. ”

Yang Tang didn't care about the fact that when he was working on the machine before, his hands were dirty, and he patted his chest directly and assured.

"Chairman Yang, this is serious, I am just overjoyed, my machine is almost finished. ”

Zhang Yu smiled, and then looked at his wire cutting machine.

Hearing Zhang Yu's words, Yang Tang took a look at his processing equipment, which was almost half, more than three times faster than other wire cutting masters, which was also what he was most proud of.

After looking at himself, he walked over, and his eyes fell on Zhang Yu's processing machine, and at this time, Zhang Yu's machine had been processed to the edge.

Seeing this, he knew that he had lost again.