The girl didn't seem to care about others, so she just stood in front of the stage and manipulated the injection molding materials at will. Although she didn't care, it made the examiner in front of her a little anxious. After all, the girl is in front of them for injection molding, no matter how you sweep your eyes, wherever you see, there will always be a person like her standing in front of you to block the line of sight, it is impossible to see or notice.

It's okay to stand like this. The reason for their anxiety is that she is not like the other students, who normally operate injection molding!

Before, they thought that the girl would not be able to operate, so they simply dripped the potion into the material, which can be regarded as announcing the girl's failure. After all, as long as the agent completely slipped out of the injection molding material, then her assessment would be considered a failure. When the meeting comes, you just need to invite her out, and it's over.

But I didn't expect that the girl thought it was funny, and when the potion was about to penetrate the block, she turned over very decisively...... Then, as if she was addicted to playing the game, the girl couldn't stop, holding the cube with one hand and poking it with the other, and kept fiddling with the cube, so that the potion inside began to swim crookedly.

The level of injection molding side business is not very good, so forget it. What is devastating is that her various actions are not standardized at all, she doesn't know anything about injection molding at all, and she is an outsider who has no contact with the injection molding side business.

The rest of the students can stand here for the assessment, all of them have studied countless times in the academy and reviewed hundreds of times of assessment! No matter how bad it is, it is better to know the basic content and knowledge, right?

It's like a person who doesn't know anything and has clumsy hands and feet is operating a machine. However, they happened to be the ones who produced the machine. Watching her continue to fiddle around, the left point is not this, and the right point is not anywhere. And even if she knew that she would definitely not do well in the end, and that she would make a mess of the machine, she couldn't say that she couldn't help but look at the situation......

This feeling can't help but be very uncomfortable. I can't wait to come forward and point out her mistake on the spot. I felt comfortable after scolding for the last two sentences. But after all, this is an assessment, although the other party's attitude is a little worse and the method is wrong, it can indeed be assessed, and there is nothing illegal except for the exam, and there is nothing to say. When they did, they were suspected of on-site guidance.

The three examiners really couldn't figure it out, how could such a candidate come here to assess the injection molding sideline? This is a formal place, the kind that will issue a formal certificate! Her level is a child's play!

How could anyone take the initiative to stand up and hope that she would take part in the second assessment? And say that she was her friend? I really can't believe it! How could she have the hope of taking the second assessment in this operation? Why did she just exercise herself? It was just a fool's errand!

After a period of time, some of the students have already completed their own works. According to the assessment criteria in item 2, students take the initiative to submit their works for the three examiners to score.

The students were naturally curious that there was a candidate standing in front of the examiner's desk, especially since the other party had decided to use the material once so boldly...... However, the exam is not their test, and at most they are curious to look at it. I think 'this son is extraordinary'!

There are many works that candidates pass. Most of them are more seen by the three examiners, and they are also relatively safe items. The more ordinary ones will carve a few words into the material, while the more neat ones will carve some recognizable patterns in the material.

As long as the pattern is clear enough, the texture is smooth, not messy, and it has a bit of a look. Those three examiners will give it a pass. Injection molding is not operated by hand, but simply swings the agent flowing inside to carry out corrosion engraving. Moreover, this is still a basic injection molding assessment, there is no restriction on the theme, there are no specific requirements, feel free to play, and there is no need to be too strict with them.

Thinking of this, the three examiners looked at the girl who had been operating calmly on the side. The other students are quite normal, and the lines are going very smoothly, even if they don't walk well, they still look a little good. The red corrosive lines of the agent are also eye-catching. It's beautiful enough, not very cluttered, and a little ornamental.

But what about her? Wow! I won't be there for a while! This piece of gel material seemed to have been hit by a huge force, and countless red vertical and horizontal cracks ran through it from beginning to end. The whole injection molding material is split into pieces! Today's injection molding material looks like a pile of squeezed dregs jelly, squeezed into a sealed container!

The three examiners always felt that if they mentioned this transparent block lightly, they might all tear this material apart in an instant! Apparently, she may have found something else to enjoy.

The progress of the candidates is one after another, and the examiner is also intermittently reviewing the works of the candidates in front of him. Time flies not fast, but it is not slow. And the candidates are all at a similar level, and they all flock to the examiner together at almost the same time.

At this time, the examiner no longer had time to pay attention to the mischievous girl next to him, and concentrated on the review of the student's work in front of him.

After some time, most of the candidates' entries passed the review and received a positive answer. Of course, when the second work is submitted, the examiner will also draw the first exam paper and inform you whether it is qualified or not, and issue a certificate of qualification on the spot. Therefore, Mr. Examiner is still quite busy at this time.

While Mr. Kaoguan was still busy with his work, a voice sounded beside him.

"Mr. Examiner, I'm done!" was the girl's voice directly on the side of the table.

As soon as he heard this voice, Mr. Examiner suddenly looked at the girl in front of him with some disdain. I still don't trust her to complete the work. Of course, Mr. Examiner couldn't refuse the other party: "The potion is poured back into the bottle, right? If it is scattered, it will deduct points." ”

"Of course! I'm very frugal!" the girl pushed a bottle over. The red elixir inside was still firmly settled under the bottle. It's as if it were an unused potion, not a drop is leaked.

What the hell is this? How could it be less?

"Ahem. After Mr. Examiner looked at the mouth of the bottle a few times, he couldn't help coughing dryly. I don't know how the girl got the potion back. However, if the potion is put back in, a little more familiar, and the luckier warlock can be very ordinary. It doesn't mean that the girl's work can do well and get a passing level.

"This candidate, is this your work? Won't you change it?" asked the examiner in a calm voice to the girl in front of him. This injection molded work, which is full of debris, cannot be said to be a very delicate work. Whoever it is, you can make it!

The girl was stunned for a moment, then replied with great certainty, "Yes!"

Hearing the answer, Mr. Kao took a deep breath slowly, seemed to calm down some irritability, and then said slowly: "--Your work seems to be just a crack formed by letting the permeable agent wander freely in the material, and in it, I can't see the pattern, nor can I see any special beauty. If it is placed in the basic assessment of the injection molding side business, I think it is just a very rough and simple work, which is not excellent, let alone good. ”

"This candidate, your work can't be regarded as a qualified work in my eyes! I don't know what other people think?" Mr. The first examiner gave a bad review without hesitation. Immediately afterwards, the second examiner also nodded and agreed with the previous comment. Two wrongs, whether the third one agrees or denies, it doesn't matter anymore, the girl has already been assessed as unqualified for this side job.

"I'm sorry, this candidate, your injection molding side job was rated as a failure, and you can't get our injection molding side business certificate, please leave the examination room." They let out a long breath, as if they felt that they had taken a great god away.

The girl shrugged her shoulders indifferently and wanted to turn away. Her figure stood out among a group of candidates. After all, candidates come here with great preparation. In the basic assessment, few people can get two unqualified assessments at once.

The two examiners couldn't help but look at each other as they watched the girl walk out the door. With a look of helplessness in his eyes, they are not only destroying the discipline of the examination room, but also a candidate who does not know how to make progress. It's so rare to see. It's simply a treasure of animals.

The two examiners were about to call the next candidate to come forward for the assessment.

The third examiner stared at the injection molding material in front of him, and suddenly interrupted the two people on the side: "Wait!" She stared at the work in front of her with doubts and speculation in her eyes, as if she felt that the work made by the girl just now was a little strange.

Mr. Examiner seemed to have a hard time understanding this: "What's the matter? You don't want to say that her work is a good one, do you?"

"Well, it can't be. Besides, she failed the first project, and she left and left!" "The girl really doesn't take the injection molding side job to heart at all, how can there be any important information to hide from her works? Besides, failing the first assessment already represents the failure of the entire assessment, and there is no point in calling it back."

"No, I'm just weird, this material of hers, although the outside is full of cracks in a few circles, and even the outside material is broken into pieces. However, a part of the center does not seem to be damaged. If her technique was rough, the center would not be so intact. The third examiner said with some scruples. After saying that, she also looked at the girl who had disappeared in the doorway.

"Huh? What are you kidding? It's not that you haven't seen her before, it's just a mess, it's a newcomer who doesn't know anything!You say she will deliberately leave the pattern in the center?" Mr. Examiner glanced at the injection molding material in disbelief, and said disdainfully.

But after saying this, he also followed the words of the examiner just now, and looked back at the inside of this square. After all, what the other party said is based on actual evidence, not casually. If there is a pattern inside the block...... That's a weird smell.

It doesn't matter at first glance, Mr. Examiner was really a little scared this time.

The examiner on the side was right...... He did see that there was really an object in the injection molding material. Moreover, it seems to have a shape! It is not a pattern formed by chance! After all, the pattern is regular and neat! A random line that has no purpose or idea!

Previously, the entire block was translucent, while the flask was red. The potion will affect the material, causing the exposed area to walk out of the red tracks, but if you don't walk through it, then naturally there will be no scars.

Countless red strips outside, confusing his vision. Coupled with the girl's rough workmanship and indifferent attitude, he ignored whether there was really a pattern in it. It could even be said that he did not carefully identify it!

But...... How is this possible?