"I know that you kid is busy, let me tell you something, the final exam is two days away, call to remind you, don't forget!"

"Ah, it's the final exam, I'm sorry, I really forgot if you didn't say it, thank you, I'll go back to school on time when the time comes!" Liu Lin was really busy with this, mainly because he was busy with this SSS super machining center recently.

"I knew that your kid would forget, so I called to remind you!" Vice Principal Li didn't blame Liu Lin for forgetting the exam, and then said: "What have you been busy with lately, I haven't seen any movement!"

"I'm developing a super machining center, and now I'm having a problem, and I'm having a headache?" Liu Lin didn't hide it.

"Do you need help? Would you like me to find some people to help you take a look?"

"I was about to call Mr. Guo, by the way, Mr. Guo is most available now, if I can, I would like to ask Mr. Guo to help troubleshoot. Liu Lin directly named Academician Guo.

"Do you want to ask Guo Lao to help? What a big show? Then you have to invite this yourself, I don't dare to arrange for him to help you, Guo Lao is a national treasure." When Vice President Li heard that Liu Lin was going to find Guo Lao of the Academy of Sciences, he was looking for the BOSS level, and said with a wry smile!

"It's okay, I'll invite it myself, is Academician Guo, the teacher of the School of Engineering, in the school now?" Liu Lin naturally knew that it was possible to invite him himself, but he was an academician of the Academy of Sciences, a figure with a special national subsidy. Although he is also half of Liu Lin's teacher, what he should do is still to run by himself.

"Yes, I also met with Guo Lao yesterday!"

"Okay, then I'll go over to Mr. Guo now!" Liu Lin said just do it, and told Li Yong to get ready to get out of the car!

"What kind of machine tool did you get, what went wrong, and you still want to ask Guo Lao to come out?" Vice President Li asked curiously.

"It's not clear on the phone, if you're interested, you can come over and have a look!" Liu Lin invited.

"Okay!" Vice President Li hung Liu Lin in his heart, like a cat scratching an itch.

"Brother Yong, you go prepare the car and wait for me, I'll take the information and go down!" Liu Lin half an hour later, Guo Lao lived in the Furong Building, and he had a phone call with Mr. Guo before, and asked him to help.

Liu Lin asked Li Yong to park the car, and after passing the doorman's inspection, he came to the Furong Building.

"Hello Teacher Guo!" Liu Lin asked Li Yong to wait outside, and after he went in with the materials to say hello, he saw that Mr. Chen Dong, the vice principal of Li, was also hurriedly saying, "Teacher Li, Teacher Chen is good!"

"Liu boy, it's been a long time since I've seen you bother me, I came to bother me for a long time, but now I'm really a little unaccustomed, I want to drink tea and pour it myself!"

"Okay, I'll do it myself!" Liu Lin was not ambiguous, put the document bag on the side, picked up the teapot and filled it to the three of them, and poured himself a cup.

"Tell me what's going on in detail?" Guo Lao asked after seeing Liu Lin take a sip of tea!

"Mr. Guo, that's the case, I design a super machining center, but after things are made, the tool will sometimes be out of position, and the accuracy can't meet my design requirements, but I studied for a week, dismantled and installed, installed and disassembled, so the accessories are no problem, and the assembly is OK, but I just don't know what the problem is?

"Is this a design material?" asked Guo Lao, pointing to the document bag next to Liu Lin!

"That's right, I'll bring the design data and parameters, and your old man will help me look at the research and research, what is the bottom problem!" Liu Lin handed the information to Guo Laodao.

"Okay, I'm going to see what kind of high-tech you've designed!" Guo Lao took the file bag and opened it, took out the documents, and looked at them slowly! In less than a minute, he exclaimed: "Industrial machine tool, you designed industrial machine tool!" Guo Lao looked up at Liu Lin in disbelief, hoping to get the right answer!

"Old Guo, what are you talking about, industrial machine tools?" Professor Chen Dong heard Guo Lao's words, and surrounded him, looked at Liu Lin and then at the information in Guo Lao's hand!

Vice Principal Li also craned his neck to stare at Liu Lin.

"Mr. Guo, this is not an industrial machine tool, it is a super machining center, but if you really want to classify it, it can barely be regarded as an industrial machine tool!" Liu Lin explained!

"Lao Guo, I'll take a look!" Professor Chen Dong said and was about to grab the information in Guo Lao's hand!

"Don't grab it, I'll see it first. "Saying that, I looked at it carefully from beginning to end!" "Wonderful, why didn't I think of this design, it's amazing, Liu Lin, is this your design?"

"Hmm..."Liu Lin could only bite the bullet and say that he designed it, and he couldn't say that it was changed out of the game, but fortunately, he had thoroughly read the technical information inside.

"I'll take a look!" Professor Chen Dong saw that Guo Lao finished reading it, and grabbed the information.

"You ......" Guo Lao glared at the information being robbed.

"Now you can tell me in detail what the reason is, no matter what the problem is, even if the whole country has to get this equipment out, if it is produced, it will be a huge improvement for the entire national industry!"

"Because the design accuracy requirements reach 0.0001, but I produce the equipment, the accuracy is 10 percentage points worse than the accuracy I require, and sometimes it is unstable, the accuracy of each accessory is produced according to the drawings, fully meet the design requirements, and I have tried several times for debugging, and it is the same effect!" Liu Lindao.

"Is it convenient to go to the scene to have a look?" and other materials were transferred to Vice President Li, and after he finished reading them, he put the materials on the table and said to Liu Lin!

"Yes, yes, go to the scene and have a look!" Guo Lao took the information and walked out!

"Okay, let's go, I'll take a look too!" Liu Lin didn't want to hide it from the country, so he went to the scene to help see what the problem was.

All the way to the gallop.

"That's the equipment!" Liu Lin took the three of them to the assembly center on the second floor of the research center, facing the super machining center.

"Is this the big guy?" Guo Lao took a step ahead, looked at the large equipment covering an area of almost 30 square meters, and asked Liu Lin!

"Hmm!"

"I'll take a look at the accessories when I start machining!"

Li Yong hurriedly put a piece of blank material on the workbench, started the machine, and the high-speed rotation of the cutter Weng Weng.

In less than five minutes, the parts are processed, and the whole process is automatic! The three of them are staring at the running machining center with their eyes shining. After Guo Lao and other accessories are processed, they go to the console, and after all the parameters are looked at once, they use the laser measurement tool.

"Okay, good, miracle, Liu Lin, you kid, finally did a great thing, it's much stronger than your wireless charger!" Guo Lao said to Liu Lin after circling the super machining center twice.

Liu Lin smiled and couldn't answer.

Several people went back and forth for another two or three hours.

"Shouldn't it? This doesn't make sense?" Guo Lao went back and forth, circled around the processing center several times, and said to Liu Lin: "Take it out and take a look!"

"Teacher, do you want to eat first, and then dismantle it later!" Liu Lin was reminded by Li Yong, and looked at the time at more than 2 o'clock!

"Yes, yes, Guo Lao, Chen Lao, eat first! Only after eating can you have the strength to study!" Vice President Li heard Liu Lin say to eat, only to find that his stomach was about to rebel.

"Okay, let's eat first!"

The five of them came to rest, saw a table of food, hurriedly finished it, and returned to the assembly center on the second floor.

One study and another week, reassembling and reassembling twice.

The entire assembly center, dozens of people are busy, and it is about to become a branch of the C Research Institute.

C research institute is a national research institute, the main research direction is CNC machine tools, CNC center, in the past few days Guo Lao and a few others engaged in two days