How do you draw a line without a ruler? How do you draw right angles? In front of Sert, perhaps this is the main problem. From beginning to end, he used a ruler to carve patterns on wooden plates or wooden supports.www.biquge.info When I was carving the last wooden plate, I panicked because the ruler was melted by the high temperature of the wooden plate, and I didn't know what to do.

This is the result of relying too much on tools.

Of course, this is actually the biggest difficulty in carving for many people. However, the limitations of this tool did not interfere with Leah very much. Having carved countless times, she has been able to use the inertia and the line on the wood grain very smoothly, and skillfully use the power in the palm of her hand to firmly control the direction of the carving knife!

Even at right angles, you can use the angle of the index finger and thumb, plus enough testing. All of them can be carved directly! So, for this kind of carving, Leah can be fully competent.

As the saying goes, as long as it is not too difficult, or the pattern and structure of the pattern that she has never seen, those need her to study carefully for a while before she can start. And everything else has been able to be made logically, easily and happily.

After ten minutes of waiting, the crimson on the wooden plate had spread to the last two, and the situation was precarious, but Celt seemed to have lost a trace, and still did not return. In this case, Leah had to play on her own.

It's a bit inappropriate to carve someone else's work without consent, let alone the last small step. But Selt is very persistent in the production of this item, and if it fails, he will also be too frustrated.

What's more, the development speed of the red spread on the installed wooden plate, even if Celt returns, I am afraid it will not be able to catch up with the final carving time of the wooden plate. The disc may change unexpectedly...... Explode?

Leah first tested the temperature on the wooden tray with her gloved left hand. See if the gloves can withstand it, when carving, it is very necessary to straighten the bracket, and it is necessary to adjust the direction of the object many times to facilitate their own carving. Touch is necessary at this time.

Make sure that when you are able to carve, your hands can withstand the temperature that can melt away even with a ruler. The heat is boiling hot, and if you get a little closer, you will also be burned. She first tested the temperature on the fifteenth wooden plate. This is where she mainly sculpts, and the temperature on it seems to be completely insulated by the thickness of the glove, and there is not much heat to the touch inside the glove.

The gloves are not completely blocked, and the hand inside can still faintly feel some warmth in the contact area. It can be seen how dangerous this wooden plate is.

The second part is to try the temperature of the first layer and the first layer of the second layer again. Their surface color is not very dazzling, just a dark red color. When the gloves touch them, they don't feel anything. It seems that the temperature on its surface is much lower than that of the last piece.

Of course, even after Leah tested the temperature on the wooden plate, even if she was pressed for time, she did not immediately use a carving knife to carve the lines on the wooden plate. Instead, I tried the carving knife on the remaining wood on the side. This is to see how hard the wood is and how the texture works.

In case when the wooden plate is officially carved, it is found that the texture of the wooden plate is very unfamiliar and the carving fails.

In general, some warm-up needs to be done on the eve of engraving. Unleash the flexibility of your hands. But there was no more time for Leah to do such a step.

But it just so happened that when Sert carved the wooden stand just now, Leah had already had priority access to the wood. When you apply a wooden frame with a stone, you already have a high understanding of the texture and texture of the wood in the process of removing the edge thorns. It's just that now I am trying not only with stones, but also with carving knives.

These few small steps were quick and didn't take much time.

When Leah was about to start carving on the wooden plate, the first third wooden plate had completely turned red, and the lines were glowing golden. And the second wooden plate on the side also slowly began to change to it.

With his left hand, he pressed the last wooden tray of the whole wooden support, and used the corner of the table, the upper edge, to hold the wooden support against it so that it would not slide.

The wooden bracket as a whole is actually very huge. It is half as tall as a human body, and at the same time, it is an equilateral triangle with the same length on all three sides. So, a whole wooden stand takes up a quarter of the table and pushes it up to the front corner of the table.

Fortunately, its huge size also happens to be convenient for engraving. There are still some slight differences in the redesign of the table in the formation department and the table in the pharmacy department. The perimeter of the table has some fixed bumps. That appears to be an extra edge designed to help secure the carved item.

And so it goes. In addition, there is a clamp edge on the table for auxiliary fixation, so that the whole stand is not easy to move. Let Leah do the rest of the work by stacking her insulated gloves around her waist against the bottom edge of the fifth layer of the wooden stand.

The temperature on the wooden plate is not felt at all due to the isolation of the gloves. The carving knife slowly starts from the edge of the holder of the wooden plate. There was the junction between the wooden disc and the wooden support, and when she had just carved it in Sert, Leah had already seen the order in which each of the patterns was carved.

Among them, starting from the lines on the wooden support, directly into the lines of the wooden plate, and then constantly drawing a fold, or a straight line of non-junction lines. Until finally carved into the center of the wooden disc with a round hole, around a square, as the end of the whole.

The carved pattern of the wooden plate can be completed.

It's easy to say and think, but it's still a little difficult to actually operate.

Among them, after each line is engraved, the pattern will burst into a crimson color, which seems to activate the pattern directly, and between the flat gaps, a red light flashes. The hissing heat was constantly transferred from between the lines, and although the left hand was gloved, the rest of the hand, such as the right hand for better carving, or the face, did not have special heat-insulating tools.

This made the scorching waves blow on the body, which was very uncomfortable. It makes people feel that if they continue, they may burn their skin into blisters.

The right hand is the closest to the disc of all. It is indeed very difficult to melt the surface temperature of the ruler and engrave it with the right hand hanging in the air.

Engraving in general, even with the aid of the left hand. The substrate of the right hand should be pressed against the object to prevent excessive shaking of the hand and errors. But now, with a thicker glove on the right hand, it is very inconvenient.

After all, the design of the gloves seems to be a little too large for Leah, which makes her unable to fit the gloves well. So when carving, just give it up. But after all, the right hand could not withstand the ultra-high temperature, so it had to hang the carved wooden plate in the air.

With her previous control and experience, Leah was barely able to carve the right pattern on the wooden plate.

The light of the pattern began to ease again due to the direction of the pattern during the carving, and although the color on the last wooden plate continued to brighten, it had slowed down. Allow Leah to take the next steps a little longer.

……

The carving process is not too complicated and difficult. In the final carving, Leah always used a different method: that is, first press her left hand on the wooden plate to isolate the temperature, and then superimpose her right hand on her left hand before carving the next step.

The advantage of this is that the right hand has a fixed point, so there is no shaking of the arm and no control of the force. At the same time, I can perform the work of a ruler with the left hand. Tighten the jaw, use disposable inertia and wood textures to make straight lines straighter, or better angles.

Without the help of tools, it naturally requires many attempts and power control. In engraving, it is not possible to attach all the power of the carving knife to the left index finger and thumb, which will still cause the line to be uneven. After all, the fingers are also related to joints and curvatures, and it is not good to carve them all by virtue of this.

"Done!" Leah carved the last strokes out of the wooden plate. The end of the pattern is just carved into the grain connection on the wooden support. The whole texture completely forms a whole!

At this time, Leah didn't dare to be careless, and quickly did her own work not long ago. Place the chips into the small hole in the middle and close the lid. Just take off the gloves and place the carving knife on the side. There was a sound of impatient running.

"!!Ahhh

Celt, who is not a wind attribute and has always been conceited, is completely incapable of running errands.

Not long ago, he even left Leah alone in the carving room of the formation! If fifteen consecutive explosions occurred, he naturally knew with many experiences: when the formation would explode, so he would lie under the table to cover and dodge. But how could Leah, as a pure newcomer or someone else's attendant, know the basis of this side hustle department?

Besides, the power of the fifteen consecutive formations, after the explosion, the power was immeasurable! It was only on the way back that he suddenly broke away from the thinking and impatience of the formation pattern and thought of this vital place.

If a man dies trying to help him carve fifteen arrays. Or a semi-finished product. I'm afraid that his whole life will be blinded by this shadow on the dark path, and he will no longer be able to get out of it!

Fifteen consecutive formations were made to ...... Selt thought to settle down.

In a lot of complex thinking, mixed with the tediousness and obsession of the lines, and with the concern for the safety of others. Celt ran wildly, crashing into a lot of students. The staircase also rushed into the door of the carving room in three steps. Too much time has passed, and if it is according to the uncontrollable development speed of the wooden plate's spiritual power, there is no chance or way to continue now!

Only before the explosion happens, rescue the assistant inside!

Sert gritted his teeth and decided to destroy his work! It doesn't matter if you die alone, but it is indeed too shameless to involve innocent others! Not to mention that when that person hears that the danger is extremely high, he is willing to help him generously!

Can't let her die!

Of course, when Celt rushed into the carving room, he was stunned by the scene in front of him!

Yes, the carving is complete! The last wooden plate was miraculously placed on the table with no effort. It's a finished piece!

;