Chapter 377: Bad Student

Although the examiner's words were already very tactful, the meaning was still very accurate to the ears of the two people in front of them. How could Miss Chi not know what it meant?

Seeing that Miss Ji Ji did not have too much emotion, the three examiners continued to narrate: "This student, you should understand that although the first written examination has no actual relationship with the formal injection molding side job, it is an entry test for injection molding, and if you fail this test...... That really shows whether the candidate is interested in this side hustle and whether he really wants to learn the side hustle...... Our examiners can also persuade candidates to leave, and will take the initiative to refund the purchase fee of the admission ticket...... This is reasonable, it is in line with the rules, and it is not our special case. ”

Under the gaze of the three comrades, Miss Cheng Ji took two deep breaths, but said to the three examiners in front of her: "Three examiners...... I just think that the results of the written examination are not counted as the complete results of the injection molding side business. Isn't there another assessment item after the written test?"

The girl is so upright, and if she fights for the second assessment for the girl, she can't help but surprise the examiner about the relationship between the two. Could it be that the relationship between them is actually very good? It has reached the level of trust? However, in this regard, the assessment will not give them the opportunity to intercede because the relationship between the two is good: "Yes, you are right. However, if the first item is tested like this, where can you do the second one? Your friend has failed the first item of the assessment, and this side job assessment will be considered in vain. There is no need to continue with the second assessment!

"But Mr. Examiner, this rule is not official, is it?"

Ji Ji's words couldn't help but make the examiner frown. Why is the other party so stubborn? For many years, he has never said that he can do well in one or not. No one has ever objected to this rule! Some students even wish they could have this rule in place so that they can leave the exam room early!

After a pause, the examiner continued: "Student, if you really understand the injection molding side job, why do you insist on letting her continue to participate in the injection molding side business assessment? The injection molding side job requires enough energy investment and a certain amount of talent! If you are not interested in it, it is better not to participate! What are you doing for her like this? Do you think that her indifferent attitude can make a difference in the injection molding side business?" The examiner really couldn't help the other party's tone. It looked like he was flouting their eyes.

Besides, they are not talking without evidence! The answers to the test papers are still there! They are also thinking about each other!

The injection molding side hustle doesn't need to be joined by warlocks who have no interest in it and are incompetent. Even though the injection molding side business is compared with many side businesses at present, the practical status is relatively low. And there are even fewer students who join the injection molding side business every year. But because of this, injection molding has also become an elegant side business in the outside world.

Therefore, they are not willing to let those crooked melons and cracked dates casually participate in it, that is, to make a name for some kind of art master.

Ji Ji was silent for a while, and then said: "Three examiners, but the injection molding side job is just a side job, all students can participate, and participate in the assessment, right?

The words of the student in front of him made the examiner immediately dissatisfied. felt that the other party was just an ordinary student, and he actually reasoned with the three examiners, as if he really knew about the injection molding side business. They kindly persuaded each other to give up this side job, but they didn't expect to teach them a lesson.

"This classmate needs to be led, and he also needs to be willing to study! Look at your friend's exam papers, can you be regarded as a person who is willing to study?" The examiner took a test paper and said angrily: "Look at this, the traces of saliva are still there, and the answers are all scribbles." Can this be considered a warlock who really wants to get into the injection molding side business?"

The examiner couldn't help it. Some people still feel that they are very right! They are really obsessed! At this time, the examiner has already included the two students in front of them in the ranks of poor students. Especially that girl, not only was she unwilling to study, but she also deliberately dragged her friend into the water. Let her help her get ahead!

Miss Ji Ji looked helplessly at the girl behind her. Seeing her poke her fingers with a pitiful face. Although the examiner was right, he was still very innocent about sleeping, and it was purely 'too late to revise'.

"Okay, this student, failing the first item in the assessment is still a foregone conclusion! No matter what you say, there is no way to change it! If you want to participate in the second item of the injection molding side business, there is no problem, and we will not interfere with you too much! But in the future, it is not so simple to enter the injection molding side business! We will not let go of any candidate who tries to pass the test in confusion!" The examiner flicked his sleeves angrily, turned around and left. Their behavior is really unreasonable. If the other party wants to participate, let them participate. Anyway, it will end up deflated at that time.

The examiner agreed that Leah would continue, and Miss Chi exhaled, as if she had let go of her mind. Seeing that the other party was relaxed, Leah didn't understand this very well, and asked suspiciously. "Miss Gong, Miss Gongji...... Why are you stopping them? My injection molding side hustle is really poor......"

Hearing the girl say this, Miss Noki smiled again, shook her head mysteriously, and left Leah, who looked inexplicable, and turned away.

The bell rings, and the second item of the assessment soon begins.

Compared with the first item, the difference between the second item and the first item is that the main content of the first assessment is the written test, which is mainly based on writing and answering questions. The second item is the actual operation.

At this time, the materials received before were lined up for a long time. A square condensed into a hard block, this square is 30 centimeters in length, width and height, and is a neat and neat cube for them to carve at will to form the shape they want. At the same time, add a bottle of 'rotting agent' that has been encountered.

Of course, the assessment is naturally different from the usual situation. There are only two differences between them, one is that the blocks they use for injection molding are transparent. On the other hand, the bottle that says 'Rotting Elixir' is colored red. Very conspicuous. After they dripped the potion in, they could clearly see the potion moving through the transparent squares, out of the pattern they wanted.

And the passing of the assessment is also very simple, just make a work and provide it to the examiner for review. Of the three examiners, only two of them need to agree to pass, and the second item will be declared passable. Of course, the work will be kept for a certain period of time, if there is any objection. Examiners can appeal to a higher level and request a review.

Three examiners reviewed the candidates in the audience. Although their works are very different, they are classified into four broad categories.

One is to cut the blocks, separate them to make small objects, and then rebuild them. They have a high margin for error and can also build quite fantastic creative works that are eye-catching. It's just that after all, he took the trail and destroyed the block as a whole, and the category is a bit out of line with this side hustle. In this way, it is usually an apprentice with other side jobs or manual foundations, and usually does not study the injection molding side business, just to pass the exam first, and the probability of passing fluctuates frequently. It's about five or five.

The second is to drop the potion into the inside of the block and carve some beautiful patterns into it. These candidates undoubtedly have a high level of self-confidence. After all, there is only one block, and if you do it wrong, you will lose everything. Without a second chance of raw materials, you can't even get qualified.

As for the third, it's a safer way to cut the cubes into several pieces with a knife and then make them. Most of their operations on weekdays are also carried out on a flat surface, cut into slices, which is exactly in line with the training methods on weekdays. Although the pattern is only fixed on a plane, it looks ordinary, but this is also an entry assessment, the requirements are not high, as long as you can make a look, you can safely cross the line.

However, in addition to these three options, there is one last option - don't do it!

The three examiners couldn't help but look at the girl they had talked about earlier.

Move the knife slightly, casually draw two knives, squeeze two drops of medicine, we all think you have the heart to do it, okay? However, the girl is like a mountain, staying in front of the square, standing still. I don't have the slightest idea of touching the block!

It seemed that seeing the examiners in front of her looking at her, she was stunned for a moment, and then immediately raised her hand and said, "Mr. Examiner!" Although her voice was not loud, it was still quite quiet in the examination room. This sound undoubtedly made many people in the audience hear it.

A male examiner couldn't help but stand up, his expression frowning slightly. The girl is not interested in injection molding side hustles. As an examiner of the injection molding sideline, he naturally did not have a good impression of her.

"Can you come and help me?" beckoned the girl.

Under the watchful eyes of some candidates, the examiner walked up to the girl and asked, "What's the matter?"

"Oh...... I can't open the cap of this potion bottle, can you open it for me?" the girl continued.

The examiner was really speechless. When you come to assess the injection molding side job, you can't even open the cap of the medicine bottle you often use? It seems that they have been redundant to such candidates before! For such students, they don't care! They used to think that the other party was young, but they just chose the wrong side job. Unexpectedly, the other party really planned to come over and mess around!

There is no doubt that the girl is a bad student in the academy! She is still the kind of bad student who does not study well and messes with the class! She doesn't look very old, but she really does things one after another. It's really a cancer in the side hustle.

"Hey, Mr. Examiner, won't you open it for me?" the girl seemed curious when she saw the examiner in front of her, slow to move.

"I said, "How did you get into the injection molding side business?" asked the examiner, in disbelief. There was some impatience in his mouth. If you can't even open the cap of this bottle of medicine, what else can you learn about the injection molding side job?" "If you can't even control your attribute power, how can you control your body? How can you accurately control your own strength? And you want to take the injection molding side job certificate? You're not kidding, right?"

When the examiner said this, he immediately attracted the attention of a large group of students around. Indeed, this move of the girl, in the eyes of other students, has already made a big joke. Learn the injection molding side business, that bottle of medicine can be encountered every time, the things used, as a result, you have come to the formal injection molding side business assessment, but said that you can't even use it?

Hearing this, the girl raised her blank eyes and said, "Mr. Examiner, I don't have attribute power, so I asked you to help......"