Leah followed her aunt to the cafeteria. Pen, fun, pavilion www. biquge。 info

Auntie placed the wooden blocks on the countertop of her work area. He took out a large wave of metal tools from a logistics box outside the kitchen and spread them out in front of Leah, these tools were quite sharp, and they were the items used by those masters.

Some of the tools here can easily cut through even metalwork.

"Little girl, be careful, don't scratch it. The aunt instructed, and when she saw that she had a carving knife, she said suspiciously, "Little girl, what are you going to do?" She did not doubt that the hardness of the carving knife could be carved into wood, but she clearly understood that any metal tool here could cut this material. At the same time, it is not worried about the wear and tear of this wood, on the contrary, the aunt understands that this material is not very expensive wood, and it can be purchased and used at will.

But when it was in front of her, she was a little unsettled. Could it be that the girl in front of her was going to carve a buckle out of wood?

Even if the carving technique is delicate, can the wood be used to support the flow of water inside the cabinet? If it is a human effort, as long as the cabinet is pressed against the wall, it can resist the surging pressure inside. But it's just a piece of wood!

Delicate carvings naturally have gaps or corners, where part of the wood is of course quite weak, and the joints will be quite simple. Without metal reinforcement, these parts will be shattered by external force. At that time, there will definitely be a flood of gold.

Moreover, metal reinforcement is not such a simple thing, let alone reinforced on wood, which may fix the bottom layer of the basic wood itself. At that time, the buckle lock will naturally be damaged and cannot be installed and used normally.

The aunt looked at Leah's performance suspiciously, not knowing what she wanted to do.

In addition to the above points, if you want to make a wooden buckle lock to replace the original metal buckle lock, then the fixed buckle lock itself needs to pull out the original buckle lock part. However, it is necessary to use a series of tools such as a screwdriver to knock off the original lock.

However, small objects such as rivets that fix the buckle lock itself are disposable tools and cannot be used again once they are removed. And the girl should also be aware of what she said before, there is no second backup for the supporting tools of this ice maker. It is no longer possible to reinstall it with a backup and fix it back.

"Don't worry about Auntie. It's going to be good soon, and it won't take long. Leah gestured to the overall size of the wood and the ice maker, as if considering a size.

"By the way, Auntie, can you bring a fire-based spirit crystal? For example, can you take off the fire-type crystal on the fireplace here and use it? Is that a spirit crystal?"

"On the fireplace, oh, that's a spirit crystal that can also be used! That spirit crystal is actually usually baked and played, I'll bring it to you now." Auntie nodded and went to get the crystal. The crystals are hidden on the left and right sides of the fireplace, and when they are usually hung baking, they are usually only used because the number of batches is not large, so they are not used much in a day. Therefore, the aunt took one down directly, and sent it back when the masters were not enough or when it was used here.

Of course, this is the end of summer. If you don't use it, you won't open it deliberately. The kitchen itself is hot enough, who has nothing to do and then turns on the fireplace, it's really full and has nothing to do! Do you want to spend the hottest dog days of the summer vacation again?

The meat products that Auntie hung were only accessories when baking, and they weren't really hung in the fireplace. She hangs the meat above the outside of the fireplace, and uses the heat to evaporate the moisture and grease that precipitates it. During the week, there was no deliberate use of the fireplace as a convenient way to dry the ingredients.

Wait for the aunt to remove the spirit crystal and return to her work area. Then I saw the little girl carve out several squares. The center is empty, and the wooden frame is surrounded by several stripes of lines, and the four corners are also carved with lines, and the shape of the four corners is the shape of four squares stacked on top of each other.

Of course, one of the four corners of the square is a little strange. In contrast to the rest of the triangles, this corner is hollowed out and has a small cover on the side. The inside of the trench presents the shape of multiple squares superimposed, which means to sink?

"Little girl, is this a formation?" the aunt asked suspiciously. She hadn't carved any formations, but she had seen a lot of them when she dismantled the machine and replaced the hedron in normal times.

"Hmm...... I'm not quite sure if it's useful either, just a replica that was moved directly from someone else. Leah spoke. Indeed, this formation was moved from Celt, and to be precise, a lot of lines were omitted, so that Leah herself didn't know if it could function normally.

However, according to Selter's half-hung guidance, it seems that as long as spiritual power is channeled, it is enough, and there is no need for whether the formation pattern is complete.

If it is incomplete, then these lines are more in line with Leah's needs.

The aunt hesitated for a moment, but still handed the hedron to Leah. In her influence, she has never seen any explosions of the formation pattern, at most it is just a loss of spiritual power.

Of course, if the aunt knew that Leah had only been in contact with the formation pattern for a few days and had carved the pattern, she would definitely not give the crystal to Leah......

Leah, who doesn't know about the pattern, is quite careful in doing things, and makes a mini version to test the water. If it's easy to use, change it to a huge shelf. And according to what Leah said in Celt, the crystal is the input source of the entire formation, as long as something goes wrong, it can be solved by directly removing it, right?

Now that the decision has been made, Leah immediately does it.

She carefully placed the warm hedron into the small gap. Sure enough, the square pattern of the groove instantly appeared red. The red mangs started from the straight line of the crystal edge, quickly derived, and instantly covered all the carved lines of this small shelf.

The red light shining on the two of them made Leah feel wonderful, such a simple carving of a few stripes can attract the attribute force in the crystal, and it can also be transmitted to the position on the side along the formation.

In Leah's amazing state, the aunt who didn't understand the development of things was still a little puzzled by this, she didn't know what Leah was doing this, could such a palm-sized box lock the cabinet door?

When the aunt was still hesitating, the faint red light instantly changed from flickering to continuous red light. Piercing the eye. The wooden frame began to slowly expand. The speed is very slow, but it is visible to the naked eye. It's like a leather pipe blocking the outlet, and the inlet is still flooding and supporting itself, filling up the pipe.

Soon after a small circle of internal expansion, the wooden frame stopped expanding. Leah, who was not afraid of explosions, poked the surface of the box with her finger, and it was a very hard feeling. When I pressed it with the palm of my hand, I only felt a slight feeling of warmth. If more force is used, in fact, the inflated wooden frame will not be pressurized and exploded like a balloon.

After trying, Leah, who saw this scene, couldn't help but breathe a sigh of relief. It seems that her idea is correct, she doesn't know how to carve the formation pattern and draw out the attribute power in the spirit crystal. I don't know what those complicated lines mean. Therefore, you can only try it with the simplest texture, the half-understood texture.

The lower part of the crystal is the pattern of the crystal placed in the center of the carved wooden plate of Celt. It's a superposition of multiple square patterns. On the outside, there are simple straight lines that connect the wooden brackets to the wooden plates.

Leah had deleted all the lines on the plate except for the central part.

The results are clear and effective.

Leah likes to try new things like wood carving, after all, these things can add to the road of growth. And there's a lot of fun. Therefore, she also felt a lot when she watched Celt carve the formation. It's just that she still doesn't know anything about the foundation of her formation, and she can't directly start training from Selt's foundation.

For the time being, she didn't want the wooden object she had made to explode before she had time to repair it like Celt. When she wasn't mature enough, Leah wouldn't easily carve the messy things that Celt Fifteen Formations couldn't understand and couldn't understand.

Leah was soon back in action.

This time, instead of using the wooden plates that Celt had scratched, she cut the largest portion of the wood and carved it on.

In the past, in order to save unnecessary material loss, the leftover wooden discs were used as testing supplies. If it doesn't work, it's better to use the large half of the wooden plate and make a rocking closing tool. Multiple tenons are used for handover, so that the door can be completely closed without the use of metal snaplocks.

It's just that it's too old-fashioned, it's too complicated, and the wood required is calculated properly. Otherwise, it won't work!, and it will take a long time to craft such an item. Even with a sharp carving knife, a planer knife and a large number of tools, I don't know if I will be able to carve it by noon.

The success of the test product now means that this step can be omitted!

All she had to do was cut out boxes the size of ice makers. Nest the door of the ice maker inside. Of course, this wooden block can also be easily removed. Because between the two corners of it is the use of brackets, and the mortise and tenon joints of the two sections are overlapped with each other.

When disassembling it, a slight up-and-down movement can make the wooden frame into two. No matter how bad it is, you can slide down the freezer and remove it from the top......

If the wood is long, it also has a certain degree of flexibility. In addition, the inner ring of the wood is a little empty, so there should be no problem in disassembling it. Of course, when Leah carved this kind of wood, she didn't think it was the kind of brittle material that broke when it was broken, and she was quite optimistic about this piece of wood, and she didn't think that when it fixed the freezer door, it would be broken by pressure.

Leah looked at the small wooden frame. After removing the crystals that were placed inside, the color of its lines had faded. However, there is still no change in the size after the expansion. The test paper between the wooden frames is still tight, and the taut and expanded wooden frame compresses and bends the paper in the gaps.

Maybe you have to use lubricant or something to take it off?Leah shrugged, if that's the case, it's just a matter of helping Auntie do it today. Auntie still has to find the final problem of this ice maker, otherwise it will be very troublesome in the future.

Because the door lock of the ice maker is not broken by external force, but the damage of the internal crystal as the aunt said, causing the cabinet door to be broken open and the buckle lock will be broken! Its real solution is the problem of the crystal, and repairing the lock alone cannot solve the fundamental problem! It will come again!

But Leah's ability is limited, so she can only help her mother survive today. Leah couldn't help this ice maker. She wasn't one of those professional masters, they all suggested a replacement, and they couldn't find any improvements, and Leah didn't think she was better than them.

In other words, you can't let her, a penniless attendant, buy a new ice maker for her aunt, right?

……

Soon Leah had the wooden shelves ready. This speed can be attributed to the sharpness of the carving knife and the ease with which the wood is shaped.

Leah looked at the busy aunt next to her. Auntie just said hello to her and went to work. She was now holding some food on the side with paper. It was one of those convenient lunches that students could take out of the insulated boxes at noon when they needed hot food.

After an hour or so, my aunt had already made a lot of preparations. There was bread, cakes, rice. It's all already steaming or grilling in the oven.

"Little girl, it's done. Auntie wrapped up her things, washed her hands, and walked over to Leah's side and said. She saw that Leah had stopped what she was doing and cleaned up the table, and she knew that the girl in front of her had completed all the steps of production.

"Yes. Leah nodded. Return the graver to its original position.

The aunt didn't pick up a few boxes on the table, but leaned over to look at them. Thick eyebrows stared at the four boxes on the table, she had no idea what this wooden frame was used for.

;