The girl and boy, familiar with the place, got up and walked towards the interior of the library. The direction they were walking was to the right of the library, where there was a staircase that climbed upward. In addition to this staircase, there is also a similar staircase behind it, on the left. The upper floors of this library look like something special.

Sure enough, on the second floor, you can see dozens of tables neatly arranged. The use area of each space is much larger than the small area of the potions and formation side hustles seen in the academy, which is two or three times more. Of course, although the space decoration is good, it is also an unpopular project of Fairwin, and there are very few guests in it, only a few, only a handful.

From the time the boy keeps talking to the girl, Leah learns that the name of this literary girl is Noki. From the information revealed by the intermittent chatter, Leah also learned that the girl was one of the guests who had lived in Fairwin for a long time.

Of course, the girl must have lived in Fairwin for a long time, not because she had Fairwin's membership card, but because one of her relatives lived here, and she had only borrowed the relative's light.

However, Leah felt that she was just being humble and not showing off the power behind her. Because what kind of relative is so enthusiastic that she is willing to invite a distant relative who is not familiar or known to her to live in a hotel with huge expenses for a long time?

As for the young man, as soon as he saw Noki mention his name, he exaggerated a gentlemanly salute to Leah next to him, and then praised Nogi's wisdom and memory with a happy face, and recalled the intoxicating and obsessive heart-warming moment when he first met Nogi.

In addition to this, Leah also knows that his name is Jill. At the same time, like Miss Notchy, he was dressed quite delicately and luxuriously, and his appearance was also a good figure from a wealthy family, and he knew that he himself held Fairwin's membership card, so he should be a good person. As for the actual life experience...... Obsessed with telling Miss Nogi's beauty and temperament, and fanatically expressing his eagerness and uniqueness for her, he couldn't breathe at all......

Both of them also asked Leah's name, but neither of them mentioned her identity. But it's not that you don't want to ask, it's that you don't have to. Leah was dressed in Fairwin's back kitchen, which was already a good expression of what her identity was. Her identity is much inferior to the two, and if she mentions it too much, it seems deliberately embarrassing. Besides, their minds are not on her.

Leah also knew that she was running a scene, but she came, but she didn't agree, and Jill Boy was likely to continue to embarrass her. It's also because Leah wants to see what the injection molding side hustle is all about. As for the noble status of the two of them, she didn't have the heart to get any power and wealth, and she didn't plan to get involved.

Therefore, it doesn't matter what they think or what they think of Leah's identity.

Noki took out the card and handed it to the waiter next to her, instructed them a few words about the materials they needed, and then led Jill and Leah to the front of a two-person table. As soon as they stood still, the waiter followed, placing the plates stacked on top of the ingredients in front of them.

Seeing that the things were in place, Jill bravely rolled up his sleeves and stood in front of the table with a look of not being afraid of the sword: "Miss Nogi! Do you know? Since the last time I left you, I have been studying injection molding every day! Until three or four o'clock in the morning, or even four or five o'clock in the morning, I have not been tired at all, and I still study hard until today!" You may wonder why I did this, or be surprised why I have such perseverance, because I know that if I want to win your heart, I can't match you without enough effort and strength!"

"And I stand here, even though I know that your strength is stronger than mine, and your side hustle level is higher than mine, but I will never want you to give me any mercy! I will use dignified means to win! I will never let you say behind my back that I have done anything shameless!" Jill said heroically: "Of course, I don't care to do such a trivial thing!"

"Hmmm. Jill suddenly straightened up, slammed his fist into his chest, and said loudly, "Miss Nogi! I know you still don't believe in my character." So, I swear now in the name of the archangel that if I do something despicable and indecent in the competition, I will be dragged into hell by the demons, without armor and cover, with black iron chains, and ten thousand demons devouring my heart!

"Hmm. Nuo Ji replied lightly, still ignoring him. The latter bowed his head in frustration and nonchalantly fiddled with the two objects in front of him. But as if he remembered what would have happened if he had won, he was suddenly shaken and began to look at the objects carefully and think about the steps he was going to take.

They needed a relatively small amount of material, a clear liquid encapsulated in a clear glass bottle with a label on the outside: Penetrating agent. The other seems to be a finished product, two transparent glass sheets about 30 centimeters long and wide, and in the center of them is enclosed a thin dusty yellow clip, a total of three layers, about the thickness of a finger.

Nuo Ji looked at the stunned appearance of the girl in front of her, and couldn't help but explain: "Leah, one of the easier methods of injection molding is the injection method. What you see now is the use of tools and the materials that need to be crafted. ”

Then, in each hand, she picked up the three-clamped glass plate and the bottle of potion: "What we have to do is to take out this bottle of potion and drip it into the entrance of this glass plate." After that, the hands control the glass plate to float, so that the potion swims according to its own ideas, and finally forms the pattern or shape you want. ”

"Part of the structure of the Gold Award that I told you about before was mainly formed in this way. However, their shaping is more complex, the upper and lower levels are staggered, from flat to three-dimensional, and after the finished product, the shell needs to be removed, the residual part is cut off, and it is turned into a pipeline. ”

Leah thought for a moment and kept what was in front of her in mind.

Miss Noki is very familiar with this side hustle, so can you tell at a glance what kind of side job the gold medal is made of? After a pause, Leah asked suspiciously, "Then Miss Nogi, you are so familiar with the injection molding side hustle, are you a student who is studying the injection molding side hustle?"

Noki pondered for a moment and replied, "Hmm...... Not really. ”

"Ahh......h

She's going to try it out against that classmate! And if she fails, she'll be on her way to the end of her life, as she said before! And Miss Nuoki doesn't look like the kind of person who talks about it! It's more like she's going to take responsibility for what she says!

Seeing that Leah's expression was a little dazed, Nuo Ji couldn't help but smile slightly, and explained: "My real side job is the smelting side job, and my main focus is on the modulation of fusion materials. But because of various relationships, I have also had a long contact with the injection molding side business, and it is also an old acquaintance of mine. So, please don't worry about me. ”

"Oh......" Before that, judging from Jill's words, they had also tried several times before. If Noki's side job was very poor, it would have failed in the early days, and where would it have been delayed until today.

Their operation soon began. However, they didn't just pick up the three-layer board or the bottle containing the clear solution. Instead, they raised their index fingers first, concentrating their attribute power, and only when the slightly light-toned air currents lingered on their fingertips did they move their fingers to the drip tube of the transparent bottle.

The head of the drip tube began to glow with the same color as their fingertips, but the color was even darker than that. As the color darkens, the transparent liquid slowly flows upwards from below, filling the entire hollow inside of the drip tube.

At the moment of stuffing, the junction between the drip tube and the mouth of the bottle made a 'pop' sound. That's when they took out the drip tube filled with clear liquid.

Then, with careful movements, they slowly leaned the transparent liquid against the corner and slowly dripped into the central layer of the glass plywood.

The next steps are purely manual. The glass pane was placed on the table at a slight angle, and his hands dragged the sides, and then the angle was constantly rotated to make the transparent water injection go in the direction he wanted.

This operation looks a bit boring, like a child playing with a toy, controlling the water droplets to move towards their goal. And this process seems to be more free, there is no mechanism, there is no hindrance, as long as you draw circles in it. It's hard to imagine that the beautiful wooden box before was actually made using this method!

Like Jill, he clearly has no intention of making a work normally. Delicate patterns, or elegant shapes, are not his cup of tea. Instead, he played a careful trick and made the pattern into two hearts, and then an arrow pierced straight through the center, implying the meaning of one arrow piercing two hearts.

Look at Nuo Ji again, what seems simple, she operates, but it is not so simple.

Noki is drawing a matrix with a perfect circle on the outside and a six-pointed star on the inside that fits perfectly into the rim of the circle. The circular interior is surrounded by fine serrations, which are staggered and spaced almost identically, as if they were printed from a mold and then folded symmetrically......

If this is not explained, Leah will not think that this is a pattern formed by using the liquid to wander away! Because it is the same as a hand-drawn! It is even much better! Leah suddenly felt that the girl in front of her was very powerful.

Because of this liquid, after reading the name and then looking at this operation, you know that it is corrosive, so it can drip into the splint and form a pattern. So, the main trick is that the control must be exquisite!

If the corrosive liquid is re-routed from the channel that has already been molded, it is guaranteed to expand the channel and cause it to become an undesirable shape. In addition, this rotting liquid is still a liquid, and it has a strong plasticity ability, and it only controls the gravity of the turntable by hand!

This leads to a high level of control, which requires considerable anticipation......

If it is like the wooden box, it is upgraded from a flat to a three-dimensional, and a more complex technique is used......

Suddenly, Leah realized again. The plane becomes three-dimensional, and although the difficulty of operation will increase several times, this is not the only difficulty!

On top of this, there must be a more terrifying, but unavoidable hidden condition: if you can't see the direction of the liquid inside, how to judge the tight pipeline inside in the direction you want?...... I can't help but be a little eager to try this unfamiliar injection molding side hustle!