Under the careful guidance of the production team leader, Hao Jun finally mastered the skills of coating mold glue. Pen "Fun" Pavilion www.biquge.info

In the middle of the afternoon, he and the production team leader completed the last coating, and then put the semi-finished product aside to do the other molds first.

This is a mold of a big ingot, much better than the mold of the eagle, and the silicone rubber does not need to be so pure, and it does not look so white.

The team leader deducted the large ingots from the plaster mold that had dried, peeled off the plasticine on the outside, cleaned it, and did the parting of the plaster mold.

Then the cleaned big ingots are upside down in the gypsum outer mold, and after being fixed, there is a gap of half a centimeter between the big ingots and the gypsum outer mold, which is the thickness of the original plasticine, and it is also the thickness of the mold glue injected into the mold, that is to say, the mold thickness of this handicraft is half a centimeter.

The team leader put the stirred silicone rubber into the machine to decompress and deaerate, and then slowly injected the gap between the large ingots and the gypsum outer mold, and let it stand aside for room temperature curing.

The whole curing process takes about twenty-four hours, and Hao Jun doesn't have the leisure to wait here, so he has to hurry up and master more things.

The team leader naturally wanted to figure out Hao Jun's thoughts, so he led him to another workbench, where the mold glue was poured yesterday.

He took off the plaster cast, used a razor blade to cut the solidified silicone rubber mold, peeled off the seated statue of Guanyin inside, and set it aside. Then the silicone rubber mold is put back into the gypsum outer mold, and after a little finishing, the stirred unsaturated resin is poured into it, and then put it in a vacuum container for deaeration.

The specific time is based on experience, usually shorter, larger surface area, bubbles are easy to escape, a few minutes is enough.

For a relatively high level like Guanyin, the process of rising bubbles will be slower and take longer.

After the deaeration was completed, the team leader moved it out, still standing there to cure at room temperature.

Under the guidance of the group leader, Hao Jun also got started with demoulding, finishing, etc., and made several Pixiu, Lucky Cat, and Maitreya Buddha.

Room temperature curing was a long time, and the team leader led Hao Jun to the next table.

Workers here are demolding a galloping horse, a porcelain horse that resembles a stone eagle.

The team leader told Hao Jun that neither this mold nor the Shiying mold over there were final molds, and that they needed to be injected with resin to cure, then taken out for fine trimming and polishing, and then a mold would be made.

In order to prolong the service life of the mold made again, a layer of mold glue is coated, and the gauze fiber cloth must be pasted once......

Hao Jun has been accompanying the workers until the end of work, mastering a lot of basic knowledge of making mold crafts, and also getting started with a lot of operations, feeling that he has gained a lot, and he sleeps very sweetly at night.

After breakfast the next day, Hao Jun went straight to Fan Ping's office and continued to look through Fan Tai's memories.

This kind of work is boring and boring, and it is still really brain-consuming, and by the evening, Hao Jun has a little headache cramp again, but he still hasn't got valuable relevant information.

However, Hao Jun got unexpected information, that is, when Fan Ping's mother had such a big belly, why did Fan Ping's father not only go to work overtime by himself, but also send Fan Ping, who likes the future little brother so much, to the boarding kindergarten?

Because Fan Ping's mother thinks that her biological child is about to be born, Fan Ping will definitely be worried that her younger brother will take away the love of her parents after birth, and it is very likely that she will try to make her miscarry! Fan Ping's happy expression is all pretending! It is impossible to be good to her younger brother in the future! Fan Ping must be sent away!

Fan Ping's father tried to persuade her many times to no avail, and saw that she was a little too paranoid, so he had to send Fan Ping to a boarding kindergarten first, and he hid in the factory, wanting to wait for her to calm down, but he didn't expect that he would be separated forever after a few days.

Fan Ping was silent for a while, and once again showed Hao Jun that she didn't want to fight for the position of factory director, because she had always felt that her younger brother had been unhappy since he was a child, and if he could really manage the factory well and had no bad intentions, he would hand over the factory to him to take care of, even if it was to compensate him on behalf of his father.

When Hao Jun and Fan Ping were having dinner together in the evening, Hao Jun suddenly considered a question and asked Fan Ping why she didn't let the club directly copy Fan Tai's memories to her, but instead asked other members to help?

Fan Ping felt helpless, she hadn't thought about it that way, she really couldn't afford to pay so many membership points!

Hao Jun was a little surprised, it wasn't even higher than the cost of "hiring" him at a high price, right?

Fan Ping showed a wry smile and told Hao Jun that it was really higher than the high price of hiring him!

Because the club encourages members to exchange crossings, they do not approve of just consuming the club's resources alone, nor do they approve of this kind of thing being solved by the club's staff in vain, so the cost is higher than that of exchanging crossings!

Fan Ping said that crystal members have a lot of benefits, such as letting Hao Jun cross over as a closer person this time. However, the club has always advocated solving its own problems, so each crystal member only has one such opportunity per year, and it cannot be used cumulatively.

No one expected that the first member to accept Fan Ping's request to come had an accident, if there was no person like Hao Jun to take over, the staff of the club could only appear, but before the life safety of the members was not threatened, the staff needed more membership points, and Fan Ping really couldn't afford it.

However, when the life safety of members is threatened, the staff often appear at the scene of the incident at critical moments and actively rescue the members, and do not need any membership points, because that is equivalent to their own work.

This Hao Jun also knew that he had done something similar for Gold Card members, and the risk factor was much higher than this time.

Gold members can negotiate with lower-level Bronze, Silver, and Crystal members to have the other party travel through their time and space for non-member exchange partners, such as doing dangerous things for relatives and friends, such as helping them succeed at their rivals, and the other party will be handled by the club. Because this form of transaction is not an ordinary exchange crossing, usually gold card members need to pay more than five times the high price of membership points, but each gold card member only has one such opportunity per year, and it cannot be used cumulatively.

If a Gold member can't find a suitable crossover, the club will initiate an alternative plan in which the club's staff will appear, and it is said that the cost is quite large. I don't know how much Hao Jun has, but it is definitely higher than that of crystal members, because the ratio of points earned by gold card members is higher, and of course they need to pay more, which is fine.