Volume 1: Monster Rises!Chapter 183: The Final Procedure

4948000.html

Next chapter

(I'm not a man, yesterday I said that I didn't do it, I'm guilty, I will do my best to make up for it.) At the beginning of every month, I will be busy, and these days I am really busy. But that's not the reason. ）

…………………………

Two thousand kilometers ~

Ye Qing's first thought was not how efficient this thing was, with a radius of two thousand meters. One sewage was purified, and another was purified.

It's about how much power this guy has to consume......

When the 110 kV grid was replaced, the people of the power company were already smiling not eyebrows. Since the metal smelting center was built, this guy has consumed two million electricity a month. The power company hated to pull another high-voltage line over, so that Ye Qing could use it.

The power of strong ionization is greater than that of a metal melting center.

Energy is conserved, and it can affect the harmful substances in the water within a range of two kilometers, which must require a large enough energy.

The bay of Longxi Beach is more than 10 square kilometers, the sea water is fluid, and the sewage will also flow with it.

With the power of this guy, Ye Qing estimated that the entire bay would be purified, and the electricity consumed would be enough to buy a Lagonda.

"The cost of tens of millions of dollars has been smashed in, and there are more lice~" Ye Qing comforted himself.

Taking advantage of the fact that the monsters were immersed in manufacturing one by one, Ye Qing drove to the Red Star Shipyard.

When the strong ionization sewage treatment equipment is put into the sea farther and farther, a boat must be followed to collect the harmful substances that are towed.

With a metal ship, Ye Qing was worried that the ship would be sucked over, so he wanted to come here to buy a fiberglass ship.

Red Star Shipyard is the largest private shipyard in Zhongyun.

When Ye Qing walked along Huanhai Avenue to the northeast of Zhongyun City, he could see two 800-ton blue painted gantry cranes like triumphal arches erected on the edge of the beach from a distance.

These big guys are produced by Zhenhua Heavy Industries, and under one of the gantry cranes near the sea, there is a 70,000-ton oil carrier carrying out lifting bridge operations.

When Ye Qing drove to the Red Star Shipyard, the doorman let him go directly without asking.

Ye Qing parked the car and walked directly into the customer reception room, a young girl who was working at the desk quickly got up to greet Ye Qing.

When doing customer sales, the eyes are all with a sweep function, and the customer is worth a dress, and he immediately has a bottom in his heart after a sweep.

Then she categorized Ye Qing among the top customers, thinking that this handsome young guy was here to order a yacht.

The hot tea was brewed, and Ye Qing's words made her heart completely cold.

"Girl, your fiberglass boat here can be made in a few days, the size is the kind of hull that is ten meters long and three wide, without motors and roofs. Ye Qing held the teacup and his eyes wandered around: "I have drawings here, and the bow part of the ship needs to be slightly modified." ”

"Sir, don't you consider adding an outboard motor, a radio, and a cockpit?" The sales girl looked at Ye Qing with pitiful eyes: "We have five yacht models to choose from, all of which are glass fiber reinforced plastic with resin coating." ”

"All I need is a hull, and you can make it in a few days at the earliest. ”

"It can be built in two days, and we have FRP weaving equipment imported from Germany here. It is guaranteed that the fiber density of the manufactured hull is 30% higher than that of ordinary products. ”

Disappointment is disappointment, and the list has to be continued.

When swiping the card to pay the money, this girl of the same age as Ye Qing almost sank her eyes into Ye Qing's credit card.

"First... Sir, can you leave an address, and when the hull is ready, our workers will deliver it to your door. ”

And home delivery service?

Ye Qing was secretly happy in his heart, and wrote down the address and contact number with a brush.

After buying the hull, Ye Qing returned to Longxitan and continued to manufacture strong ionization industrial sewage treatment equipment.

As a result, at half past five, Ye Qing's phone rang.

An unfamiliar number, but the voice was not unfamiliar, it was the saleswoman at the Red Star Shipyard.

On the phone, her voice was very gentle, and she asked Ye Qing if she was free tonight?

She said that she wanted to go to the bar to drink some wine, but she didn't have any friends around, and she just met Ye Qing in the afternoon, and she felt quite close to her.

"I'm sorry, you're not my type. "At this time, the metal expert is in powder metallurgy, the most critical embryo casting step, how can Ye Qing want to go on a date with a girl who doesn't fit his eyes?

This refusal was direct enough and hurtful enough, and the girl was stunned for seven or eight seconds.

"You...... You...... The hull is gone, you can find a car to tow it yourself. ”

"Whatever. Ye Qing smiled and hung up the phone.

Powder metallurgy, which is the door sounds very lofty on metallurgical technology.

Many people are unfamiliar with this technology, isn't metal smelted like molten iron?

How do you smelt with powder?

Like ceramics, metal alloy powder is used to die-cast the embryo into the shape of the finished product, and then sent to a high-temperature furnace to be fired like a ceramic.

The technology was first used to make hard-to-melt metals, such as tungsten filaments in light bulbs.

Among the various metals, tungsten is the most difficult to melt and volatilize. Its melting point is as high as 3380 degrees, so people have the idea of grinding tungsten into a powder and adding catalysts, aluminum-silicon and thorium oxide.

In this way, there is no need to boil to 3380 degrees, only 1500 degrees can be fired to produce qualified tungsten wire.

And powder metallurgy has an advantage - integrated molding.

Often, the processing of those cemented carbides can make it difficult for engineers.

The high cemented carbide is an excellent material for making gears, it has good wear resistance and damage resistance.

Through guò milling, the evenly mixed alloy powder is forged into a qualified embryo, and then sent to firing, you can get a gear that does not need to be processed on any lathe.

Of course~ the principle of powder alloy is simple, but in the actual forging process, the requirements for industrial technology are very high, especially the high-precision molds used to forge embryos.

If the mold design is not reasonable, the embryo forged by the press will have an uneven internal mechanism, and only the product will be fired with no surface.

Similarly, powder metallurgy can be used to fire metals as well as non-metals.

Metal experts are now playing non-metallic firing, using graphite and ceramic powder as the main material, using diamond powder as a binder, mixing a certain proportion of solvent oil and alcohol, using a freshly built mixer to do irregular rotary motion mixing and grinding, and finally passing through the metal melting center to forge into the shell embryo of the magnetic generator.

The higher the forging pressure, the stronger the material will be.

The forging pressure of the metal smelting center is 10,000 tons, which is more than a large number of powder metallurgy enterprises. But metal experts disdainfully said that a forging pressure of 100,000 tons can be counted as a "good!"