W City Iron and Steel Plant, on the production line.

"Molten steel, be careful ...... below"

"Quick...... Above, hurry up!"

A group of workers are nervously operating. In fact, the metallurgical industry can be said to be an industry that is in urgent need of organizational cooperation and is highly dangerous. It doesn't matter if there is no accident, but once there is an accident, it will definitely be a big deal. To put it bluntly, thousands of degrees of heat are no joke, and even a little splash is likely to cause fatal problems.

Most of these workers are middle-aged – in fact, a large proportion of young people have gone elsewhere. That is, these middle-aged workers, it is too difficult to change careers and learn others, and they are unwilling to work hard to move bricks, so they return to work.

In fact, over the years, the earth's metallurgical technology has been developed at a high speed, and equipment similar to the steel plant in W City has long been more than outdated. For example, the equipment of many iron factories is now extremely automated—let's just say that in order to achieve a lot of fine control, slightly more reliable modern equipment is automatically controlled.

The integrated circuit is used for automatic control, and a series of precision parts such as beams, columns, rollers, and guide rails are used, and a series of observation and control facilities such as travel limit switches, X-axis and Y-axis control mechanisms are installed, mold linkage parts, gearboxes, reducers, brakes, equipment weight sensors, temperature sensors, and potential sensors are used. Ordinary operators can operate in front of a secure main control panel. No manpower is required, only through the precision testing instrument installed in the furnace, you can observe whether the travel switch is normal, the offset angle, the reciprocating motion of each moving part and other specific conditions. to assist the operator to grasp the operating status of the equipment. The smelting process is overwhelmingly fully automated. In fact, with the help of a large number of sensors, the various data are aggregated and transmitted to the main console, which is clearly visible to the operator.

Ren Jian claimed at the time that he had modified the equipment and allowed the workers to return to work. But everyone who knows how to do it knows at a glance that it is not very reliable. Automation is the trend – after all, the human brain can't compare to the computer. Only the relevant data needs to be solidified in the chip, and each data is transmitted back to compare with the data in the chip, everything can be compressed to the allowable error, so that the steel or alloy quality is stable and the process is safe and controllable.

This is how high-quality alloys and steel are made - don't look at the skilled workers in the steel mill who have never used this kind of equipment themselves, but they have never eaten pork, and they have never seen pigs walking, so at first almost no one thought that there would be any hope for this old and backward equipment.

But the truth is so strange. The same steel ingots smelted by "unreliable human hands", but the physical properties of the steel produced by this equipment are much beyond everyone's imagination. It is even several times stronger than those produced by fully automated equipment.

This means that gyroscopes, bearing balls, lathe guides, and lathe tools made of this steel have smoother surfaces, higher precision, impact and wear resistance, and longer service life. Of course, in fact, it is not that simple, as the saying goes, "good steel must be used on the blade", after the performance is improved, the application surface will be greatly enhanced.

Material manufacturing has always been not China's strong point, it is generally believed that China has a large output, but the quality is not high, and it is a steel power, but not a steel power. But this time, the steel mill, which should have gone to the grave a long time ago, produced a product that even the old workers in the factory could not have imagined, and the various steels met the best standards that could be achieved under the current conditions. The quality is so good that even the top manufacturing companies in Europe and the United States can only be said to be flat at best.

From this point of view, many people who had "bought land" before Ren Jian (as I said earlier, this matter is not a secret at all, a clear-eyed person knows that Ren Jian is not for entering the iron and steel metallurgical industry at all, but for the land of the steel mill) was originally full of disgust and even hatred, but after seeing this set of equipment, it has changed a little bit.

Although it is an old-fashioned (the "old-fashioned" means the way it operates), it obviously took a little effort to smelt such high-quality steel.

In particular, almost no one notices when and how the equipment was modified. Or rather, no one is aware of the problem at all. After all, the factory was previously shut down – meaning that no one would come to the factory except for a few security guards. Even if people gathered, it was not for work, but to go to the city government for a sit-in and demand that the government solve the workers' problems. Even if it's the security guards, they care about the office building. After all, in the office building, there are some furniture and office equipment worth so much money. Anything else, especially this production line, which is obsolete even by the standards of the steel plant in W City, is usually not seen at all - it's not worth much anyway, just let it be exposed to the wind and rain here.

Even if there were some deformations in the equipment—not to mention the inconspicuous details, even the most conspicuous height, length, and so on—who would care? Besides, the reason is not that it cannot be found: Ren Jian himself admitted that the equipment had been technically modified by someone he had found someone.

Since Ren Jian said that the equipment was transformed by him, it will be done. As the boss, Ren Jian naturally allows anyone and any equipment and vehicle to enter and leave his factory at will. It is also normal for the renovation work to be done quietly.

Even if someone had a special curiosity, if he had conducted an ordinary investigation, he would have gotten only one information: no one had noticed how the vehicles (vehicles transporting equipment) and the people had come in during that time. However, not seeing does not mean that it did not happen, and the ultimate fact is undeniable. At most, it makes people feel that everything is a little strange, but it is not associated with any "supernatural ability events". And, as everyone can guess, if there is no doubt on the first day, no one will pursue it in the future. Do you really have to come to the door and ask the boss to come up with archival materials such as the origin of the transformation of the production line? Or in other words, how can a normal person pursue this kind of thing? In the final analysis, the boss said that he found someone to renovate, but in fact the equipment has indeed been transformed, it must have been someone who recruited workers to install and debug, transported the equipment, and it took a while to install it. If you don't realize that it's your own business, people are not obligated to notify you to observe the scene.

"Yes...... It's me, Mr. Gao! Hello! I see. The busy worker team leader picked up the walkie-talkie and immediately understood that it was the factory director Gao who contacted him. "Boy, you're in luck. He turned to a young deputy in his thirties. "Starting today, you will be the leader of the fourth group, and you will be on probation for a month. ”

The people around were envious and jealous, but there was no voice of hatred.

It's been a while since this mysterious high factory director appeared.

Although at the beginning almost no one believed in a foreign country, and even the other side of the ocean (it must be said that although Gao never specified which foreign country he was in, almost everyone instinctively felt that he should be in the United States) could really manage the factory well, it turned out that he did have this ability.

It is not clear where Director Gao got such information, but he has done at least two things, the first is to get close to the masses. He knew exactly what every order he was doing, and he never. The second is that what he knows is unpredictable. Everyone knew that two of the factory's purchasing staff had been fired in a very short period of time – in the most dishonorable way, by public notice.

Anyone who has worked in one of the large state-owned enterprises knows that the purchasing and sales staff (as mentioned earlier, Ren Jian used almost all the old people in terms of personnel) are usually a bunch of very cunning foxes, who are always able to use all kinds of ambiguous rhetoric and cunning, ambiguous judgment criteria to create their own personal interests (if they dare not openly ask for bribes). But this time they ran into a hard iron plate. Of course, it's not just two people. Almost everyone understood that Director Gao was by no means in a distant place as they expected, and he couldn't manage it at all.

This kind of situation always starts in this way: when they sign those contracts, the director always calls them with a just right phone call, and then reminds them with kindness that the contract cannot be signed or that there is a problem with the price, and at the same time gives a guide price. Of course, the same is true for purchasing, and the same is true for sales.

According to the factory's system, the purchasing staff does not decide on such contracts alone. Even if it is not a purchase, but just to inspect the condition of the goods, it is usually carried out by multiple people. Because different raw materials vary greatly. For example, the domestic Panzhihua iron ore ore contains not only iron, but also titanium, vanadium, magnets, chromium, scandium, cobalt, nickel and a lot of other messy components, which is difficult to deal with; However, even this system turned out to be unreliable in the end. The bribe-giver's means are endless, and if there is a leader who leads the team, it will directly become eight points if he gets the leadership done. If you don't have a leader to lead the team, you can also break them one by one. As the old saying goes, how can a cat not steal, and how can an official not love stolen goods. If this "official" is understood as "the one who holds power", it can explain everything well.

But now the situation is different. Director Gao had such a detailed grasp that everyone knew that he must have ambushed the dark line.

It's not just a matter of purchasing and selling, it's also about production. During this time, with the progress of production, the director of the high factory appointed and dismissed a number of middle and low-level cadres on the production line. Everyone knew that he must have a trustworthy eyeliner in the factory, but there were also those who thought that Gao relied on the ubiquitous camera (which is everywhere now).

But in any case, Director Gao still easily established his prestige. Because his convictions were always clear, clear, and easy to enforce, both the workers and the cadres were happy to obey him, and they were carried out quickly. All those who question his authority, or who want to prevaricate, are the first to be warned, and often there is no chance of a second warning.

After all, this is already a private enterprise, and whoever the boss wants to leave, he will leave. Not only that, but if the boss has some evidence, then even the severance pay will not be paid.