A few days later, Lin Qi saw that Meng Xin was very idle during this time, and he couldn't help but wonder.

"Wife, how is the 1-micron lithography machine of Lin Meng Technology?" Lin Qi asked, "It's been several years, and I heard you last year, and there are only a few key projects left that have not been overcome." ”

For Meng Xin's ability, he is naturally a hundred assured, and after a long run-in, the original group of geniuses in various fields who are angry have been trained very well.

In fact, there are many people in the field of scientific research, although there are many frauds. However, the real business-oriented R&D investment like the new entrepreneurship department or Linmeng Technology is absolutely intolerant of fraud.

Capital's emphasis on the rate of return will inevitably use various methods to exclude counterfeit and parallel goods. The rest are naturally people who really have the ability and can do projects.

These people are naturally more blessed to be higher than their own level.

"Actually, it has been successful, and after a while the acceptance is completed, the results will be announced. Meng Xin's sideburns were still a little scattered, and when she said this, she immediately showed a little pride.

"Really?" Lin Qi immediately stopped chopsticks, this is exciting news, lithography machine technology has always been a shortcoming in the domestic market, and it has been controlled by foreign countries for a long time.

There are many brands of lithography machines, but the real high-precision technology has always been a technical difficulty, high-end projection lithography machine can be divided into step projection and scanning projection lithography machine two kinds, the resolution is usually between ten nanometers and a few microns, high-end lithography machine is known as the world's most sophisticated instrument, the world has 70 million US dollars of lithography machine.

High-end lithography machine can be called the flower of the modern optical industry, the manufacturing difficulty is quite large, looking at the world, there are only a few companies that can produce, foreign brands are mainly based on the Netherlands ASML (lens from Germany), Japan Nikon and Japan Canon.

However, China's lithography machine started relatively late, and it was only in the bud at this time. In later generations, domestic lithography machines are basically products in the low-end market!

Many people are proud of domestic Internet companies, but they find that many of the key chips that support the Internet and hardware cannot be localized.

The most critical thing to make chips is the need for lithography machines, as well as a series of supporting industries.

But the lithography machine is absolutely the top priority, after independently mastering the manufacturing and technology upgrading of the lithography machine, a series of semiconductor industries have begun to have roots, and can really continue to develop around this core manufacturing technology.

"Our lithography machine basically integrates the domestic team with ideas and capabilities, concentrates the most ideal technical personnel in the country, and the cheap and even free technical support of cross-industry and interdisciplinary experts. Although we have contributed money, in fact, the state has secretly supported a lot of resources, and without the strength of the whole country, even if I have a large amount of future information, I cannot put this technology into practical use! However, after the results of this production, it was simple, and the technological gap between our country and the international community was narrowed from more than 10 years to less than 3 years. Mainstream technology manufacturers, such as semiconductor factories in Japan, use lithography machines that are not necessarily more advanced than ours, so they have stimulated the fighting spirit and confidence of the domestic industry. In the future, it will not be so difficult for us to lead this kind of technical research!"

Meng Xin suddenly opened the conversation, the lithography machine is the result of Lin Meng's years of research and development, it is difficult to break through the technical blockade, and buying a patent is not so simple, this idea is not unprecedented, not enough The quotation of several international companies is almost sky-high.

Meng Xin's strong temperament was stimulated, and with a huge injection of funds, he finally achieved good results.

"Great, the 1-micron lithography machine has been successfully developed, and the domestic semiconductor process level and the international advanced level have been shortened to at least 3 years. ”

Lin Qi is happy, this is not only a credit to the new business, but a one-time improvement of the level of domestic lithography machine, it is foreseeable that the government will definitely have a tilt in the policy, as for talents, Lin Meng has a large number of reserves, and every year is looking for good candidates, Meng Xin's salary is very good, so far, there has not been a loss of employees, so that Lin Qi also has to admire.

Such talents are basically high-end, and they can be popular wherever they go, and the reason why they stay is definitely not only because of the salary, but also because of Meng Xin's management methods, although Meng Xin gave them a dismount at the beginning, but the effect is obviously very good.

"What is this? We still have immersive lithography technology, this technology is so awesome! Influence the next few decades, and then the Dutch ASML in Europe completely dominated, mainly because of the correct route, took the route of immersive lithography. At the beginning of the 21st century, when the semiconductor manufacturing process was stuck at 65 nanometers, the Japanese manufacturers quickly began to supply only low-yield lithography machines from the countries with the leading production capacity of lithography machines, and they are still failing and going bankrupt!"

"Are you saying that in the future, the technology of the domestic semiconductor industry can be internationally leading?" Lin Qi was not only shocked.

"Yes, I can develop something better without ASML's lithography machine. Meng Xin said proudly, "In the future, in the lithography machine market, Lin Meng Technology has the final say, not only domestic, but also globally, and when our more critical technological breakthroughs appear, it will be like that." ”

……

On October 9, 89, Lin Meng Technology Co., Ltd. announced that the successful research and development of 1 micron light technology instantly attracted strong attention from the technology industry and media at home and abroad.

1 micron lithography machine, this can definitely be called the country's important weapon.

There are no more than five countries in the world that are capable of making such precision machines.

Even the current Soviet Union, although there are many other technologies, cannot make a 1-micron lithography machine.

Now the strongest countries in the field of lithography machines, mainly the United States, Japan, the Netherlands and other countries, the Netherlands is actually not a single effort to make lithography machines, but behind the vast number of European countries, as well as the supply of precision parts from supporting enterprises around the world. Therefore, some of the most basic things, the Netherlands does not need to develop its own.

However, Linmeng Technology Company cannot only develop products, but not the peripherals. In the whole research and development process, at least thousands of major topics have been overcome in China, not only some well-known scientific research institutions. It can be said that all universities in the country basically have the research and development of some sub-projects assigned by Linmeng Technology.

Tens of thousands of teams, millions of cheap scientific research dogs, adopted the model of crowd tactics, and gnawed down one hard bone after another. Many people do projects alone and don't do it themselves.

But after these projects are integrated, Nima's, this awesome will be a big hit!

Originally, the technological level of semiconductor equipment exported to China would be at least 10 years behind before it could be sold domestically under normal circumstances.

But now, those expensive and backward foreign garbage that go to Nima!

In the future, domestic high-end chips can directly use their own domestic lithography machines!

At the same time, Xinchuang Semiconductor announced the launch of a new generation of XRM architecture CPU, named Luban 1 generation, with an integrated 1 million transistors and a single-core frequency of 50MHz. In addition, high-performance dual-core, quad-core, and six-core are launched for users to choose.

"After hard work, we finally overcame the technical problems, have our own alignment system, and at the same time overcome the difficulties of aligning the microscope, as we all know, in order to enhance the field of view of the microscope, many high-end lithography machines, using LED lighting, we also apply this technology to the low-end lithography machine. ”

Experts and scholars who came to visit and exchange sounded a warm applause, although the country has increased the relevant investment in recent years, but has not achieved too good results, Lin Meng Technology Company took the lead in achieving this, which is a good news for the entire industry, in the face of foreign lithography machines, it is finally able to be tough.

"The contribution of Linmeng Technology Company to the lithography machine is worth celebrating, shortening the gap between domestic semiconductors and the international level, and we are no longer controlled by others!"

An old scholar spoke excitedly, he was already very old, but he still came here and witnessed this exciting result.

"Our research results are also inseparable from your contributions, although Lin Meng Technology has achieved gratifying results, but we still need to forge ahead and upgrade to the international level. ”

Meng Xin's expression was dignified, and it attracted a round of applause.

The release of the Luban generation has caused a frenzy among users, and they can choose according to their needs.

This is a boon for gamers, as well as for companies with large software applications, as they no longer need to upgrade all the machines, only need to upgrade the CPU, which can bring a good user experience.

"Kudos to this wave of entrepreneurial operations, it really solves a big problem!"

"A company like Linmeng Technology is the pride of the nation!"

"Xinchuang Electronics and Lin Meng Technology were created by Lin Qi and his wife Meng Xin respectively, these two companies are better than all the investment promotion projects after the reform and opening up!"

Many people are sticking out their thumbs, and the new entrepreneurship is willing to continuously invest huge assets in the return cycle is relatively long, and there are huge risks in the future in the scientific and technological research and development, which is definitely to the society, spreading some positive energy.

Many domestic teams, such as Huawei's boss Ren and Wang Chuanfu, who plans to start his own business, are all thoughtful...... Entrepreneurship should not only look at profits, but also look at the contribution to the technology industry, especially the contribution to China's technology industry. The world's scientific and technological theories are the common wealth of mankind. But...... It is impossible to share the results of scientific research that can create commercial benefits!

Therefore, if Chinese want to improve the level of science and technology, the more important thing is to look at themselves. The more talents and funds you invest in scientific research, the more rewards you will have in the future. If you only do something that is easy to see the short-term benefits, then the core technology will not fall from the sky.