"Xiao Zhu, there is a problem with the computer of the engraving shop on Hanghai Road, saying that it can't be output, you can go and take a look!"

"Good"

Zhu Siqi went out with the toolkit, he has been working as a technician in this advertising equipment company for half a month, this company is very small, even the boss and the boss lady are only five people in total, and there is an old technician, the boss is also both technical and business, the boss is responsible for finance, and there is a full-time salesman. It can be said that although the sparrow is small, it has all kinds of organs!

Zhu Siqi has a lot to do, in addition to going to the door in the city, but also have to travel in the province, although the company is not large, but the cutting plotter sold is all over the province, as for this time to go to the special laser engraving machine is only a temporary transfer, sold relatively little.

Come to Hanghai Road engraving shop, there is no problem with the computer here, but the engraving software is missing a few files, at that time the engraving software is used DOS system, the configuration of the computer is also very low, the optical drive is not, but the software is also very little, in addition to the font library has hundreds of M, the main program is only a few M, the software generally has a backup in the hard disk, find the main program from the D disk, cover the original program is OK!

But when I got back to work, it was two hours later, and all the time was spent on the bus. Explain to the boss Manager Zheng that the problem has been solved, and then return to his technical area.

Manager Zheng's name is Zheng Chuntao and he is a native of Ningbo. At the age of only twenty-seven or eighteen, the computer is self-taught but proficient in electronics, and the maintenance of the cutting plotter is the most important thing for the cutting plotter they sell. As for the computer, as long as it can understand a few basic DOS commands, it is fine.

Zhu Siqi's company is called Dadi Company, and the name is very magnificent, but there are only two rooms in total, one is a business room and a financial room, and the other is a technical area and a product showroom. What he usually does in the company is to be familiar with the operating software of the cutting plotter - the Condor cutting system, and the other is to be able to operate the engraving machine, of course, as long as he can demonstrate to the customer.

The brand of cutting plotter sold by Dadi Company is called "Saibao", which is a device imported from the United States, and the price is very expensive, a cutting plotter with a width of 60 cm costs more than 30,000 yuan, and of course the profit is also very high. Although Zhu Siqi didn't listen carefully, he inevitably learned from his perception that the purchase price was only more than 10,000 yuan, and their company was only a third- or fourth-level dealer, so it was conceivable that the cost was not very high. However, at that time, there were no domestic enterprises that could produce, even if there were occasionally one or two companies that could produce it, but the performance was far from the same.

There are two determinants of the performance of the cutting plotter, one is the accuracy of the self-adhesive paper, the United States Saibao can go ten meters only a deviation of about one centimeter, but the domestic one has a one or two meters is very good, and the distance is a long paper and walked sideways. The other is to engrave small characters without deformation, the same centimeter small characters, the Saibao machine carved out with a camera to mention the word will come out, but the domestic machine is often not connected together at the corner, and if you want to lift the word, you have to use a blade to reprocess.

So although their machines are sold very expensive, but the sales are very good, Zhejiang Province has their customers all over the province, of course, there are other brands in the market, such as Japan Roland, but the quality is slightly worse than the competition, in the Zhejiang market is basically these two brands in the competition.

The operation of the cutting plotter is very simple, you only need to control the position of the knife cart on the self-adhesive, and then you can go online. This will be on the first day he came. As for the operation of the cutting software, it is not very complicated, otherwise it will be difficult for those in the advertising production company to get started, and now what Zhu Siqi wants to do is to crack this software.

Condor cutting software is developed by Taiwanese, because it is easy to operate and the font is very beautiful, compared to the English software that comes with the cutting plotter, the vast majority of people choose this set of software, although it is very expensive to more than three thousand, even if the purchase price of the earth company is not cheap, two thousand sets, its value is fully reflected in the dongle of the software belt.

At that time, the dongle was inserted into the parallel port of the computer, and the engraving should also be connected to the parallel port, and the dongle was used to insert a needle into the computer on one side, and the hole was on the other hand, which was expanded into a parallel port, and the data line of the cutting plotter was then connected to the dongle, and the software could not be opened if the dongle was not inserted or damaged.

Zhu Siqi also studied this dongle, and he found that the reason was very simple, but when the software started, it was necessary to read a piece of data from the dongle, and even if the dongle was pulled out after the software was running, it would be fine. What he has to do now is to make a capture program to intercept this data, and then put this data directly in the computer, and release this data immediately after the software is started, then the software can also be said to be cracked.

Copy the capture program that took two nights to the computer first, run, and then run the Condor cutting software, exit immediately after entering, check the capture program, and sure enough, a piece of data was intercepted, and it was immediately saved to the file. And put this file into the automatic batch to run, so that as soon as the computer is turned on, the file will be in memory. As long as the memory data is not cleared, the cutting software can be run whenever it is running.

Test it immediately, unplug the dongle, restart the computer, their company did not put the cutting software in the automatic batch like the customer, enter the software folder, enter the CUT command, and press enter! The familiar black interface on a yellow background appeared, and it was successful! Zhu Siqi shouted in his heart.

Immediately remove the capture software and restore the computer to its original state. He didn't want to let anyone else discover the software he had worked so hard to build. Then copy the encrypted data file to a floppy disk, and prepare to find an opportunity to hand it over to Manager Zheng. Then delete the data file on the hard drive

The old technician next to him went to see what Zhu Siqi was doing, his name was Gu Hai, and the boss was a fellow countryman, when Manager Zheng introduced him, he called Zhu Siqi and called him Gu Chief, but Zhu Siqi has always been unaccustomed to it, just called Gu class, Gu class, and after a long time, he became Brother Gu.

Zhu Siqi did not come before the company's technical door-to-door and business trips are done by him, since Zhu Siqi came he has been a lot more leisurely, every day is only to answer the customer's technical consultation calls, rarely go out, now he is free to study the new WINDOWS95 operating system. Pirated of course.

Microsoft had just held a press conference in China to publicize the WINDOWS95 official release in China, and within a few days there were pirated discs in the computer market. Zhu Siqi also bought a set, but it is genuine, and it is the original English version! He found that the WINDOWS95 is still much more advanced than WIN32, and the operation of the computer has become much simpler and more intuitive, especially in terms of networking, it comes with a browser, and the network protocol is very complete.

BUT ITS REQUIREMENTS FOR HARDWARE ARE ALSO MUCH HIGHER, RESULTING IN A LARGE-SCALE UPDATE OF COMPUTERS! MANY OF THE SOFTWARE UNDER DOS IN THE PAST CANNOT RUN UNDER WINDOWS, ZHU SIQI HEARD THAT EVEN THE CONDOR CUTTING SOFTWARE IS DEVELOPING A WINDOWS VERSION.

When I woke up, it was half past two in the morning, so I got up immediately and updated a chapter!