Tang Fei was picking up the internal phone on the desk, ready to call Wang Hailong and Yang Chenglin in.

Now that he has set the goal of achieving a total revenue of 16 billion US dollars this year in his mind, Tang Fei has to call his two capable generals in, explain them well and tell them both.

When he first entered New Year's Day in 2004, Tang Fei had talked to Wang Hailong about this matter, and Wang Hailong conservatively predicted that there should be no problem in achieving a total revenue of 15 billion US dollars this year.

Tang Fei added $1 billion on this basis, and initially set a total revenue target of $16 billion this year.

Such a goal should be achievable, Tang Fei even thinks that he may be a little conservative, but he doesn't want to set the goal too high and put a lot of pressure on everyone.

In addition, although Jiuzhou Industrial Group has developed well, and its development has been basically smooth sailing in recent years, with the expansion of scale and the rise of influence, it will inevitably cause some people and forces to blush, and some risks and difficulties are temporarily unpredictable.

In order to include this unknown difficulty and risk, Tang Fei only set a conservative target of $16 billion this year, striving to enter the top 350 of the world's top 500.

Just as he was picking up the phone on the desk, Tang Fei's mobile phone rang.

Tang Fei shook his head lightly, thinking in his heart, whose phone is this, it is such a coincidence. When I took out my phone and looked at it, I couldn't help but laugh.

This is a call from Zhang Ping from the capital.

"Mr. Tang, Happy New Year, your Jiuzhou Industrial Group has gone to work in an all-round way. ”

Tang Fei said: "Director Zhang, Happy New Year. We have gone to work in full swing, and the following subsidiaries have also entered the state in full swing and started the production and manufacturing of a large number of products. ”

Zhang Ping and Tang Fei chatted briefly for a while, mainly to greet them, and also briefly inquired about the development of Jiuzhou Industrial Group, especially to congratulate Tang Fei again, wishing Jiuzhou Industrial Group a successful ranking among the world's top 500.

After chatting for a while, Zhang Ping's tone was joyful, and he said loudly: "Mr. Tang, I want to tell you a good news, our second engine has begun to enter the assembly stage in Factory 336. ”

That's great news!

Tang Fei's mood suddenly improved unprecedentedly, and there was obvious joy on his face. Because this engine is no longer a verification machine, but an engine that will be officially delivered to Jiuzhou UAV Company.

The first engine was a validator, which was primarily used for design performance verification. This engine will be officially installed on the first drone.

When the first engine was completed and put into commissioning, Tang Fei personally went to Factory 336 to see the first test run of the engine.

At that time, Yu Shaoguang told Tang Fei that many parts of the second engine were basically manufactured, and the assembly of this engine should be carried out after the Spring Festival.

They do what they say.

No, to be precise, it was a little earlier than promised, and before the Spring Festival holiday had completely passed, they had already started the assembly of the second engine.

Hearing such good news, Tang Fei suddenly became happy.

"Director Zhang, the 336 factory is really powerful, I was worried that their second and third engines might not be able to keep up with our progress, but I didn't expect that the second engine has actually begun to enter the assembly. ”

"Yes, their performance is really good, I heard that they started working overtime on the third day of the Lunar New Year, which is amazing. ”

The two chatted happily on the phone, and then, Zhang Ping also asked about the situation of the first drone of Jiuzhou UAV Company with concern.

Tang Fei clearly told Zhang Ping that in early March, the first drone will begin to be assembled.

It's the middle of February, and it's only a dozen days until March. After receiving Tang Fei's affirmative reply, Zhang Ping also became happy, "Mr. Tang, is this true?"

"It's true, our drone assembly plant will be completely completed soon, and then we can start the final assembly of the first drone. ”

During the entire Spring Festival, Jiuzhou Industrial Group basically had all holidays, with only a few exceptions, including the construction of a drone assembly plant.

The huge factory is putting the finishing touches on the work, mainly finishing touches, and the workers and technicians there only have to rest for three or four days during the Chinese New Year.

The hard work has finally paid off, and the plant will be completely completed and put into use in about half a month. Tang Fei also confidently told Zhang Ping that in early March, Jiuzhou UAV Company began the assembly of the first aircraft.

Everything is ready, only the east wind is owed.

All the parts of the first drone are in place, and even some parts of the second drone have begun to be manufactured. At present, it is only waiting for the completion of the final assembly plant.

After receiving an affirmative answer from Tang Fei, Zhang Ping said: "Great, this is really exciting news, I will report to Minister Tang immediately." ”

If Tang Guoqiang knew the good news, it is estimated that he would also be very happy.

"Mr. Tang, when the first drone enters the assembly, I must come and take a look. ”

Tang Fei said: "No problem, I will inform you when I arrive, and you are welcome to bring it." ”

After answering Zhang Ping's call, Tang Fei made a cup of tea by himself, and stood in front of the large floor-to-ceiling window of his office with this cup of tea, looking into the distance through the glass.

Tang Fei thought in his heart, the drone is finally about to enter the substantive stage, everything is ready, only the east wind is owed. Our first drone is about to start being assembled.

This is a large UAV comparable to the "Global Hawk" UAV of the United States, in addition to not having attack performance, it will be better than the "Global Hawk" in terms of longest range, longest stay time, resolution and so on.

The first drone will enter the assembly stage.

For this drone, the military can be said to have been waiting for a long time.

After Zhang Ping reported to Tang Guoqiang, the top military officials quickly convened a special meeting. On the one hand, the latest progress of the UAV was conveyed at the meeting, and on the other hand, it was announced that the entire UAV project would continue to enter a state of secrecy, and it would not be partially declassified until the first UAV successfully flew into the blue sky, and the existence of this UAV was appropriately disclosed to the outside world.

At present, this drone is still in the secret stage, and the vast majority of people in China do not know the existence of this drone, let alone understand its performance.

The main purpose of appropriately revealing its existence is to deter some small people and enhance the deterrent power of the military.

More than ten days have passed in a flash.

The time entered the beginning of March.

During the period from the Spring Festival to the beginning of March, the first engine of the 336 factory successfully entered the 300-hour long-term assessment test stage, and the engine is currently being tested on the test bench and the performance is still very good. The second engine has completed the assembly of some parts and is progressing relatively well.

What about Jiuzhou UAV Company?

During this time, that is, more than ten days, they finally successfully completed all the finishing work of the UAV assembly plant, and the entire assembly plant has changed greatly, and the first UAV is about to enter the assembly stage.

Aircraft assembly, it is an important part of aircraft manufacturing, and the same is true for drones.

It is also the process of accurately positioning each part or assembly with each other according to the technical requirements of the product, and assembling it into a component or product with the specified connection method.

Aircraft structure is different from general mechanical products, in its assembly process, can not only rely on the shape and size of the parts to ensure the assembly of qualified groups, components. Therefore, in addition to the use of various general machine tools, common tools and test equipment, it is also necessary to develop special assembly process equipment for different types of components and components.

Such as assembly frame, alignment frame, finishing frame, wall plate assembly fixture, etc. These special production equipment is used to complete the assembly and assembly process of aircraft products from components to components, and the larger size is generally called the assembly frame, and the smaller size is called the assembly fixture, and there is no strict and clear boundary between the two.

There are a large number of assembly process equipment in the aircraft assembly plant of Jiuzhou UAV Company, which are all designed by the system and manufactured by some very powerful manufacturers outside.

In the plant, not only all the assembly process equipment is in place, but also other equipment is in place, and the whole plant is ready.

The first drone will begin to enter the assembly stage.

Early this morning, Xu Guangming drove out of the villa, Tang Fei did not go to Jiuzhou Industrial Group, but went directly to Dongguan City and Jiuzhou UAV Company.

Next, Tang Fei's work will also focus on the assembly of Jiuzhou UAV Company, to be precise, the first UAV.

Before about ten o'clock in the morning, Tang Fei had already arrived at the destination, and at the gate of the factory, Liang Xiaofeng and others from Jiuzhou UAV Company were already waiting there.

"Boss. ”

"Hello boss!"

As soon as Tang Fei got out of the car, everyone greeted Tang Fei one after another, all with an excited look. There is no way, the first drone began to enter the assembly stage, and everyone had irrepressible joy in their hearts.

"Let's go, let's get in the car and go to the final assembly plant!"

Entering the factory gate, there are several convertible cars parked there, they are a bit like sightseeing cars in the scenic area, and they are also electrically driven.

Everyone got into the car one after another and went directly to the UAV assembly plant.

The factory has been completed, and the greening work has been done well, and it is a modern garden-style factory. Riding in the car, looking at everything in the factory, Tang Fei nodded from time to time.

Liang Xiaofeng sat next to Tang Fei, and he introduced the current situation of the factory to Tang Fei.

The factory area is very large, the area of each plant is also very large, the road in the factory area is also spacious and straight, the whole plant covers an area of nearly 2,000 acres, if the adjacent supporting airport is also counted, the area is much larger.

Even by car, it took several minutes to reach the gate of the huge aircraft assembly plant, and in order to welcome Tang Fei's arrival, the gate of this large factory building has been opened.

Tang Fei looked inside the factory through the open door, and when he saw some of the conditions inside, he was satisfied. As soon as the car stopped, Tang Fei was the first to get out of the car, walked in front, and walked towards the factory.

……

Today's third watch, the third watch is sent, thank you!

https:

Genius one second to remember the address of this site:. Mobile version reading URL: m.