The Americans are fairly well-informed.

The day before yesterday, Tang Guoqiang secretly and low-key went to Jiuzhou UAV Company to inspect, and in just two days, they got information.

The U.S. general informed the rest of the U.S. military about the situation, and suddenly there was a look of concern in the room, and many people guessed something.

As a general-level figure, Tang Guoqiang will not go to Jiuzhou UAV Company for no reason, and his visit must be the reason.

Some people in the U.S. military speculate that it may be that Huaxia has made significant progress in the development of that UAV, is it because the general assembly of the UAV has begun, or has some other phased results have been achieved?

In the conference room, there was a buzz of discussion, and many people were talking in low voices.

They are full of worries about Huaxia's large drone, and they have always felt strong pressure, because this is a large drone that is comparable to their "Global Hawk" drone.

Many of them have struggled to accept the fact that their Global Hawk drones cost a lot of money and took many years, and so far only four have been produced.

As for Jiuzhou UAV Company, from the time they learned about the development of that large UAV to now, it has only been less than two years, and the factory of Jiuzhou UAV Company has not only been fully completed, but also may have begun the assembly of the first UAV.

The U.S. military general said directly: "Ladies and gentlemen, according to our intelligence, Jiuzhou UAV Company may have officially started the assembly of the first UAV. ”

What the!

Although some people had such speculation in their hearts, when these words came out of the mouth of the American general, the faces of the other people in the conference room changed slightly.

If this is really the case, the progress of the Jiuzhou UAV is too fast.

In fact, the first UAV of Jiuzhou UAV Company has been basically assembled and is about to usher in the joint acceptance of the military expert group.

If they knew that, they didn't know how they would feel.

…….

North-West Aircraft Factory.

In the office, Chairman Zhong Yong was talking with his chief engineer Gu Junping. The content of the conversation between the two is related to the "Xianglong" large drone.

They have sent dozens of technicians to Jiuzhou UAV company to study, a few days ago, these personnel have returned from their studies, bringing back precious, very advanced aircraft assembly technology, it is foreseeable that the aircraft manufacturing level of the Northwest Aircraft Factory, especially the total assembly level of the aircraft will be improved a lot, they will benefit a lot.

Zhong Yong said gratefully: "We need to keep this kindness in our hearts, without Mr. Tang's help, it would be impossible for our people to bring back such advanced assembly technology." ”

Gu Junping next to him nodded thoughtfully.

After these people returned, Gu Junping also held a special sharing meeting for these people to share their experiences, and it was obvious that they had gained a lot of money. Zhong Yong, as the chairman of the board, also participated in the sharing meeting.

In addition to thanking Tang Fei and Jiuzhou UAV Company from the bottom of their hearts, they also talked about the first "Xianglong" large UAV.

The military has set up a joint expert group, which includes not only the military's own experts, but also experts from major aircraft factories, major universities, and major scientific research institutions, with a total of more than 20 people, and the lineup is very large.

It can also be seen that the military attaches great importance to this drone. As the technical responsible person of Northwest Aircraft Manufacturing, Gu Junping, as the chief engineer, was also fortunate to be a member of the expert group.

He said modestly: "Tomorrow I will leave for Jiuzhou UAV Company, and I will mainly go with a learning attitude this time." ”

Zhong Yong nodded approvingly, "Lao Gu, I think your attitude is very correct, in addition to an in-depth understanding of this drone, I think the main thing is learning." ”

I hope that through this acceptance, I can learn the advanced technology of the "Xianglong" large UAV, and hope to be able to touch the bypass, which will help my career, and if I can be inspired to help the development of new aircraft in the future, it will be better.

After correcting his mentality, Gu Junping also admired and said: "We only delivered the large parts of the first drone to Jiuzhou UAV Company last year, and it has not been a year until now, and they have produced the first UAV in such a short time, I can't imagine it, it can be described as speed." ”

"Yes, the speed is not ordinarily fast, if it is put on us, it is completely impossible speed, which is worth learning from. ”

The two chatted with admiration about the first drone of Jiuzhou UAV Company, and with an attitude of learning, Gu Junping found that he had a lot to learn from Jiuzhou UAV Company.

Led by the military, the members of the joint expert group began to leave for Jiuzhou UAV Company to begin the joint acceptance of the first UAV that completed the final assembly.

This is also the first acceptance.

There are at least two to three such joint acceptances, and when the first "Xianglong" large UAV completes its first flight, it will usher in the second acceptance. It is possible that after some important design verifications have been completed, there will be a third acceptance, which is also the final acceptance.

A total of more than 20 experts began to arrive at Jiuzhou UAV Company.

Of course, Tang Fei knew about this matter, which was not only a big deal for Jiuzhou UAV Company, but also a very important thing for the entire Jiuzhou Industrial Group.

According to Tang Fei's instructions, Wang Hailong went to Guancheng City on behalf of Jiuzhou Industrial Group to receive the joint expert group, so as to show that Jiuzhou Industrial Group attaches great importance to this acceptance.

Jiuzhou UAV company has already made all preparations, not only to sort out all the relevant information needed, the "Xianglong" UAV has also been thoroughly assembled, it is quietly in the center of the assembly plant, waiting for the arrival of the expert group.

Tang Fei did not go to Jiuzhou UAV Company for the time being, and only went to the final acceptance summary meeting to prepare, because Li Xueyan's labor date is getting closer and closer, only about a month away, and it is possible to give birth early at any time.

In the past two days, Li Xueyan felt a little uncomfortable, which made Tang Fei more nervous. Li Weibin and Xiao Meilan are not far from Li Xueyan, and even Tang Xuewen and his wife hurried over from Qingjiang City to live in a big villa and take care of Li Xueyan.

Seeing that her husband is so considerate and the elders care about her so much, Li Xueyan, who has a big belly, has a happy face.

She said softly to Tang Fei: "Brother Fei, I'm fine, the little guy is probably a little naughty, and he just wants to come out earlier." ”

Tang Fei gently stroked his wife's bulging belly, and said softly: "That's not good, little guy, I tell you, you have to stay in it for ten months before you can come out." ”

Seeing Tang Fei's appearance, Li Xueyan burst out laughing, "Brother Fei, how can he understand when he is so young." ”

"I don't care. Tang Fei looked a little domineering and pretended to be very serious, "Boy, you must stay for ten months before you can come out, otherwise, Lao Tzu will beat your ass." ”

Li Xueyan smiled again, her face full of happiness.

He gently leaned his head on Tang Fei's shoulder, and said softly: "Brother Fei, the military's expert group has arrived at Jiuzhou UAV Company, you just go and take a look, I don't need you to worry about it here, there are parents and them." ”

Tang Fei gently held his wife's little hand, and said softly: "Don't worry, I'll talk about it in two days, and I'll go over again when the acceptance summary meeting is held on the last day." ”

This morning, a group of more than 20 people from the joint expert group arrived at the factory of Jiuzhou UAV Company, and the military person in charge of this acceptance is Zhang Ping.

After arriving at Jiuzhou UAV Company, we were warmly received by Wang Hailong, Liang Xiaofeng and others, and went to the prepared conference room first.

Everything is ready in this meeting room, not only hot tea, all kinds of fruits and snacks, but also all kinds of materials for acceptance.

In addition to Liang Xiaofeng, the general manager, the accompanying personnel of Jiuzhou UAV Company also include Fei Dongming, as well as the technical minister of Jiuzhou UAV Company, several backbone technicians and so on.

Fei Dongming: They are mainly responsible for the technical market, such as facing some technical inquiries from experts.

Everyone entered the conference room, and after sitting down, Liang Xiaofeng gave a welcome speech, and then Fei Dongming introduced the situation of this drone to the experts.

The introduction information is very detailed, Fei Dongming is very specific, "Xianglong" large UAV has what technical advantages, what powerful functions it has, etc., he has introduced them one by one.

After listening to the briefing, the next step is to enter the formal joint acceptance stage.

There are two main contents of this joint acceptance, one is to accept the relevant technical data, review the rationality and perfection of these materials, and so on.

The second is the review of the physical object, and the experts will specifically review the physical object of the first "Xianglong" UAV, including the manufacturing materials related to it, quality data, etc.

During the entire acceptance process, experts will also ask a variety of questions, which need to be answered in detail by Liang Xiaofeng, Fei Dongming and others.

Such an acceptance is planned to take three days, and today is the first day.

This morning, I mainly listened to some introductions about drones, and then everyone had dinner in the factory area of Jiuzhou UAV Company.

After lunch, everyone took a short break.

In the afternoon, they began to split up, and some of the experts stayed in the conference room, mainly reviewing the technical data of the drones, checking their completeness and rationality.

Others go deep into the production site, mainly to see the production and manufacturing process of various parts of the drone, and also focus on the physical situation of the first drone, especially its quality.

Under the leadership of Liang Xiaofeng, a number of military personnel, including Zhang Ping, as well as more than a dozen experts, walked into the huge UAV assembly plant.

As soon as they came in, many people saw the "Xianglong" drone in the middle of the plant at first sight, and this aircraft suddenly attracted everyone's attention!

…….

Today's three watches, the second one is sent!