The car did not stop, and drove directly into the UAV manufacturing plant, and the goal was very clear, driving towards the aircraft assembly plant.

The car was unimpeded.

It was Xu Guangming who was driving, and Tang Fei was in the car.

This morning, he set off from the big villa and came to the Jiuzhou UAV Company factory in Dongguan City, Tang Fei mainly wanted to see the progress here. Just yesterday, Tang Fei also received a report call from Liang Xiaofeng.

On the phone, Liang Xiaofeng gave Tang Fei a comprehensive report on the current situation of Jiuzhou UAV Company. He told Tang Fei that a processing plant has been put into use, and the production of some drone spare parts has begun.

The large-scale aircraft assembly plant is also nearing the completion stage, and the installation of some tooling and equipment in the plant has begun, and the assembly of the first UAV will begin in about a month or two.

This is what Tang Fei has been looking forward to for a long time, after listening to Liang Xiaofeng's report, Tang Fei came over today, and drove straight into the UAV manufacturing plant in the off-road vehicle, with a very clear goal, and went straight to the assembly plant.

The first thing to look at is the situation of the assembly plant.

The relevant spare parts of the first drone have been basically manufactured, and all the purchased parts have been purchased. The airframe components are also in place, and as soon as the building is completed, the final assembly of the first drone can begin immediately.

The off-road vehicle arrives at the gate of the assembly plant.

This is a huge building, with a height of 30 to 40 meters, and even a large passenger aircraft such as the Boeing 737 can be assembled normally in this building, which shows the scale of this building.

Tang Fei got out of the car and saw a total of three large trailers parked outside the factory at first glance, each of which was loaded with something and covered tightly with a tarpaulin.

This should be the tooling required for the final assembly of the drone, which is designed by the system and manufactured by a professional manufacturer outside, and is now being shipped here.

Tang Fei also knew that the first batch of tooling had arrived a week ago, and now it has been basically installed, and it can be used for the general assembly of drones in the future.

"Let's go, let's go in. ”

Tang Fei glanced at the three big trailers, and then waved his hand into this huge factory, his eyes lit up slightly after coming in, and he sighed in his heart, compared with the situation he saw last time, there have been a lot of changes here.

The factory is no longer empty, but there is a lot more equipment and tooling, some of which are very large and tall, and they will be used for the general assembly of drones in the future.

After these equipment and tooling are in place, the final assembly line of a large UAV has begun to take shape, and its prototype can already be seen, and there are many workers and technicians in the factory who are busy.

Liang Xiaofeng is also in the factory.

These days, he basically mainly soaked in the production site, and the one who spent the most time was this assembly plant, and he had a strong sense of accomplishment when he saw that this plant was changing every day.

"Boss, you're here!"

Seeing Tang Fei's figure, Liang Xiaofeng immediately trotted over all the way and greeted Tang Fei happily.

Tang Fei said with satisfaction: "Lao Liang, there are many changes here, some equipment and tooling have begun to be installed, the assembly line of the first UAV has begun to take shape, and it seems that there will be no problem with the total assembly of the first UAV in another one or two months." ”

Liang Xiaofeng said confidently: "Boss, after the Lunar New Year, we will start the general assembly of the first drone. ”

All the spare parts of the first UAV are basically in place, including the avionics system of the UAV, the optical imaging system, the infrared imaging system, the body parts of the UAV, and so on.

Once the building is completed, the final assembly of the first drone will begin.

Hearing this, Tang Fei was also happy in his heart, and said loudly: "I'm waiting for your good news, when the first drone starts to be assembled, I will definitely come and take a look in person." ”

After finishing speaking, Tang Fei waved his hand and said, "Let's go, first accompany me to visit our assembly plant." ”

Liang Xiaofeng accompanied Tang Fei to visit this factory, Tang Fei looked very seriously, and also looked very carefully, nodding with satisfaction from time to time.

During Tang Fei's visit, the three large trailers slowly drove into the large factory, and they stopped in the designated area. After the car was parked, the tightly covered tarpaulin was unraveled, revealing the vehicle's very advanced large-scale tooling, the UAV assembly tooling designed by the system.

Under the command of the technicians, the workers began to lift these tooling from the large trailer and began to install these tooling.

After a visit to this large factory, Tang Fei was very satisfied, and waved his hand: "Lao Liang, you reported on the phone that there is a processing plant that has been put into use, let's take a look." ”

Liang Xiaofeng said: "The production of some parts has been started there for several days, and some parts of the second drone are currently being manufactured. ”

The parts of the first drone are all in place, and they are only waiting for the final assembly. The parts that are then manufactured belong to the second drone, and in addition to some purchased parts, some other parts are basically manufactured in this factory.

Including the production and manufacturing of airframe parts, the aircraft factory in Northwest China only produces the body parts of the first UAV, and the body parts of the second UAV are produced and manufactured by Jiuzhou UAV Company itself.

Accompanied by Liang Xiaofeng, Tang Fei walked into the manufacturing plant with great interest.

This is a sheet metal parts manufacturing plant, an area of more than 10,000 square meters, the construction standard of the plant is very high, the ground is clean, almost can shine the figure, the whole plant is also neat.

There are already a lot of workers in the factory, and everyone is busy manufacturing some sheet metal parts.

Sheet metal parts are one of the most common types of parts in aircraft manufacturing, and drones are no exception, and there are many sheet metal parts. They are made of aluminum alloy sheets that are blanked, stamped, welded or riveted and then processed through a series of machining.

Some sheet metal parts for the second drone are being manufactured.

In some of the blanking processes, the aluminum alloy sheet is cut into various predetermined shapes by various cutting machines, and then formed by stamping, or directly started welding.

In the welding area, Tang Fei saw a number of welders welding parts, and immediately came to the side with interest, and now he took a serious look at the side, and then found something unusual.

Among them, there is a middle-aged welder who is skilled in his movements, showing a high level of welding skills, and next to him there is a part that has already been welded.

Tang Fei took two steps forward and looked at this part seriously.

Soon Tang Fei showed surprise on his face, and waved his hand loudly: "You all come and take a look, how beautiful this part is welded!"

Everyone came together.

Liang Xiaofeng said: "This is the most beautiful welding piece I have ever seen, I didn't expect that there is such a welding cow among our workers." ”

After receiving the praise, the middle-aged welder who welded beautiful parts smiled a little shyly, obviously a little introverted, the kind of person who is quiet and only focuses on doing things.

However, there was a young welder next to him who seemed more extroverted, and he said loudly: "Leaders, Lao Han used to be a technical expert in their unit, and he also had a nickname, called 'Welding Emperor Wu' by everyone, and he had a lot of unique skills on his hands. ”

Emperor Welding!

It's more interesting and very vivid. Even Tang Fei himself laughed.

Through inquiry, Tang Fei finally knew that "Old Han" was called Han Riming, a worker in a pressure vessel factory in Guancheng, but the factory was not operating well and was basically about to close down, and it happened that Jiuzhou UAV Company was recruiting a large number of workers, and Han Riming was now a welder of Jiuzhou UAV Company.

Tang Fei advised: "Lao Liang, we must not treat such people who have unique skills in their hands, and we must give them good treatment, let them work here wholeheartedly, and contribute to the production and manufacturing of our drones." ”

"Okay, boss, I won't treat them badly. ”

Tang Fei stayed in Jiuzhou UAV Company for almost a day, and it was not until evening that Xu Guangming returned to his big villa in Shenhai City.

Tang Fei was very satisfied with the progress of the entire Jiuzhou UAV, and did not expect that Jiuzhou UAV Company inadvertently picked up a leak and recruited a cow like Han Riming.

What makes Tang Fei extremely pleased is that the final assembly plant of the UAV is about to be completely completed, and the final assembly of the first UAV will start in another one or two months.

The first processing building was also put into use, and the production of some parts for the second drone began. Tang Fei thought in his heart that in 2004, there will definitely be a number of drones flying into the blue sky, and it will also win the first military order in 2004.

For the market prospect of this drone, Tang Fei is convinced!

It is a drone comparable to the "Global Hawk" of the United States, and once the trial production is successful, the military will definitely order a large number of them. With such an advanced UAV, it is estimated that the strength of the military will also be invisibly improved.

This is the first drone of Jiuzhou UAV Company, Tang Fei has already thought about it, and when it is successfully trial-produced, the next UAV will be developed.

……

Plant 336.

On the test bench, the delicate engine gradually stopped, and soon, the entire test site erupted in cheers, and some people even jumped for joy.

Yi Chunhua looked at the engine of the drone on the test bench through the huge soundproof glass, and thought to himself, and finally passed the 150-hour long test smoothly.

Judging from the current test data, the performance of this engine can be called perfect, very good.

……

Today's two watches, the first one is sent.

Today, I was invited to Changsha to participate in the inaugural meeting of the Changsha Internet Writers Association, and there is no time to code words, so there are only two chapters today.

https:

Genius one second to remember the address of this site:. Mobile version reading URL: m.