Tang Fei walked briskly in front, and everyone followed, and soon came to the front of these things.

They had just been unloaded from the big trailers, and the tarps that covered and tied them had not yet been undone, and they were still tight. Others may not know what these things are, but Tang Fei and Liang Xiaofeng and others know it clearly.

These things have been long-awaited for a long time.

They were transported from the northwest region thousands of miles away, and finally arrived at the Jiuzhou UAV factory smoothly, seeing these things, Tang Fei was not only happy, but also lightly relieved in his heart.

The body parts of the first drone arrived.

They are produced and manufactured by a very powerful aircraft factory in the northwest, and the production and manufacturing were completed at the beginning of last month, and then, a joint expert group was set up by the military and Jiuzhou UAV Company, where on-site acceptance was carried out, and the things were fully qualified and the production and manufacturing were excellent.

After the acceptance was completed, these things were directly loaded there, and finally arrived at Jiuzhou UAV Company after a long journey. These things are huge, some of them are twenty or thirty meters long.

With such a long-distance transportation, Tang Fei was still a little worried, so he specially called Liang Xiaofeng to advise him, and also called Zhu Yong and them personally.

Something has finally arrived!

Seeing them, Tang Fei waved his hand and said: "Untie the tarpaulin, arrange our quality inspectors and technicians to jointly accept it, and mainly check whether there is any damage and bumps during the transportation process." ”

Liang Xiaofeng immediately arranged it.

Soon some people came, a few key technicians, and a few experienced quality inspectors, and everyone began to untie the tarpaulin that was covered and tied tightly, and gradually, the first large part revealed its true face.

This is the tail of the drone!

As the tight tarpaulin on the first large part was unraveled, and then the other tarpaulins were all untied, these things were unreservedly revealed in front of everyone.

They have the wings of the UAV, the structural parts of the UAV, the landing gear of the UAV, etc., and the body parts of the first UAV are basically complete.

In the future, they will be assembled in this large factory and assembled into the first drone.

Seeing these things, everyone looked happy one by one, and Liang Xiaofeng waved his hand and said: "Conduct a visual inspection immediately, and the boss must know the inspection results." ”

These parts have been inspected in detail at the manufacturing plant and have been jointly accepted by the expert group, and there is no need to inspect some dimensions and technical conditions.

At present, what needs to be done is a visual inspection, mainly to see if there are bumps and other situations in the long-distance transportation process. These core technicians, as well as the experienced quality inspectors, immediately got into action and began to carefully inspect the parts.

Tang Fei walked over and inspected these parts in person with great interest, and after looking at them, Tang Fei looked satisfied, these parts were well protected during the transportation process, and there was no bump.

Sure enough, not long after, a key technician came over to report: "Chairman, Mr. Liang, according to our inspection, these parts are intact. ”

Tang Fei nodded with satisfaction, and then said, "Then cover the tarpaulin again and protect it." ”

The final assembly of the drone will take some time, at least until the basic construction of this plant is completed, and these parts may be placed here for a while, and it is necessary to cover it tightly with a tarpaulin.

Then, accompanied by Liang Xiaofeng and others, Tang Fei visited the assembly plant under construction, and then went to see some other plants.

Some of the factories are progressing very quickly, and the fastest one is already in a decent building, and many manufacturing equipment has been installed in place.

Liang Xiaofeng reported: "Boss, in more than a month, about the beginning of December, we will start the production and manufacturing of some parts of the drone." ”

At that time, it is indeed possible to start the production and manufacturing of some parts, and by the beginning of next year, the full production and manufacturing of all parts of the drone will begin here.

At that time, the first drone will also be assembled in the drone assembly plant.

Tang Fei asked: "The hardware facilities are already very good, and the software facilities must also keep up, such as the construction of the talent team, the improvement of the enterprise structure, and so on." ”

Liang Xiaofeng reported: "Our technical team has reached the scale of three or four hundred people, and after the technical team is perfected, the total number of people will reach more than 1,000. ”

The production and manufacturing of drones is a technology-intensive industry that requires a large number of skilled personnel. Liang Xiaofeng: They have had a good start, and they have already formed a team of hundreds of technicians.

He continued to report: "Management personnel, all kinds of production workers, auxiliary personnel, etc., we have also recruited a part, next month will also hold a large-scale talent recruitment fair, before the start of part of the parts manufacturing, the total number of employees of Jiuzhou UAV company can reach about two or three thousand, the personnel structure can be initially improved......."

Tang Fei listened carefully to Liang Xiaofeng's report, he was very satisfied with their work, he basically didn't worry about it, Liang Xiaofeng did a good job.

After visiting several manufacturing plants under construction, Tang Fei went to the warehouse with a construction area of nearly 10,000 square meters under the leadership of Liang Xiaofeng.

It mainly stores all kinds of spare parts for drones, including purchased parts purchased from the market, as well as various spare parts produced by various suppliers in the future.

As for the finished product, the drone will be towed to the adjacent supporting airport and parked on the apron of the airport after it is manufactured.

The construction of this large warehouse is progressing well, basically completed, and a lot of parts and components have been stored in it, some of which are drone spare parts manufactured by various subsidiaries of Jiuzhou Industrial Group, and some of which are imported spare parts purchased by the military from overseas.

A lot of spare parts are already in place, Tang Fei thought to himself, in another three or five months, the final assembly of the first drone will be able to begin.

Visited the UAV manufacturing plant, saw this large warehouse, and at the invitation of Liang Xiaofeng, Tang Fei walked into the office building of the factory.

Although this office building is not big, it is beautiful and stylish, with a beautiful glass curtain wall on the outside and a good decoration on the inside, which can probably accommodate hundreds of people.

The decoration here has been completed, and there is a taller and larger building next to it, which is still under renovation, which is the technology research and development center of Jiuzhou UAV Company, which can provide at least 1,000 people to engage in technology research and development there.

The technology research and development center is still under renovation, the office building has been renovated, and Liang Xiaofeng and others have begun to work in this building.

Tang flew into Liang Xiaofeng's office.

In the office, Liang Xiaofeng not only made a detailed report to Tang Fei on some of the work of Jiuzhou UAV Company, but also said some of his plans and intentions.

Liang Xiaofeng said that after the first UAV is manufactured, he wants to make an attack large UAV, preferably a large attack UAV with a long range, all-weather, and stealth.

Hearing that Liang Xiaofeng had such an idea, Tang Fei smiled happily.

Liang Xiaofeng has some ideas that coincide with Tang Fei, and Tang Fei also has such plans, and in the future, he is also preparing to plan to produce and manufacture large attack drones, which will be developed by the system, the world's most advanced attack drones.

And attack UAVs will be divided into multiple types, in Tang Fei's imagination, these attack UAVs will include strategic bombing, attack fighting and other models.

…..

U.S. military.

A high-level meeting was being held in one of the high-level conference rooms, attended by senior members of the U.S. military, including several generals.

They received information from spies lurking in Huaxia, and color photos were scrolling on the big screen in the conference room.

As can be seen from these photos, a convoy of several large trailers, loaded with big guys, covered and tied tightly with tarpaulins, is driving into the production and manufacturing plant of Jiuzhou UAV Company.

The American general who presided over the meeting had a serious expression, "Gentlemen, you may have guessed what these cars are carrying. That's right, they should be some large parts of the drone. ”

Many people's faces changed slightly.

The US general said worriedly: "In this way, the progress of this UAV of the Huaxia military is much faster than we imagined, and the production of some large parts has been completed." ”

What is the performance of this large UAV, they already have a basic understanding, and after spending a lot of effort and a lot of money, they finally got back the introduction information of this UAV a few months ago.

As can be seen from this introduction information, this large UAV is a reconnaissance UAV, and its performance is comparable to that of their "Global Hawk" UAV.

They originally thought that the development and production of such an advanced UAV would be very difficult, and it might take at least five or six years for Huaxia to produce the first engineering prototype, but the actual situation was much faster than they guessed.

After the US general finished speaking with great concern, he personally called up a relatively clear satellite picture, which was a picture of the Jiuzhou UAV Company's manufacturing plant taken from a high altitude through a reconnaissance satellite.

He said with a solemn expression: "The factory construction of Jiuzhou UAV Company is very fast, this is the latest satellite picture, you look at this picture again, it is a picture two months ago." ”

Judging from the comparison of these two pictures, the changes in the factory area are indeed great, and it can be clearly seen that the construction of the Jiuzhou UAV factory is progressing rapidly.

They may already know that in a few months, the production and manufacturing plant of Jiuzhou UAV Company will be fully completed and the production and manufacturing of UAVs will begin.

…….

Today's three watches, the second one is sent!

https:

Genius one second to remember the address of this site:. Mobile version reading URL: m.