Originally, Ning Yunshu's plan was that if he had a single-room dormitory to live in a factory, after enduring a month without going online, he could use his salary to buy a light brain, but now it is in the soup. Pen Fun Pavilion wWw. ｂiquge。 ｉｎfo

Since I don't have a factory to live in, instead of going to other places to endure not being able to study online for a month, it is better to go back to the same place, have a light brain to use, and be familiar with it, and then find a way to change places after the salary is paid.

So Ning Yunshu still decided to go back to the dormitory where she had lived for more than half a month, and when she arrived at the door of the dormitory, it was already dark, and the lights in the corridor had already turned on, and she saw the door number for the first time: No. 5011.

Originally, she thought she didn't have to come back, and she didn't look at it when she went out, but now she can't help but sigh, this is fate/(tot)/~~

There was no one in the room, so 521 was there, and she went into the kitchen to eat a sweet fruit that she thought was delicious yesterday, and after taking care of her personal affairs, she went back to Li Qingyang's room to read and study.

The next day, Ning Yunshu took a bus to the factory, breakfast had long been stopped, she was taken into a small room, I don't know if it was for secrecy or to reduce interference, each master or cooperative group had a separate workshop, Ning Yunshu was assigned to install the simplest first-level parts, and applied for a single workshop.

Wearing heavy overalls, after signing the delivery order, press the walking button on the car, the transport worker sent to the door of the transport car automatically ran into the room, the car stacked 25 boxes with small parts, this is the workload she needs to complete today, after completing the assembly, put the parts into the detection conveyor belt to test whether they are qualified, and then record the number of qualified or unqualified by the brain, and send it to the corresponding workshop

This factory mainly produces small parts, and then assembles them into primary and secondary large parts and sells them.

The small mechanic is responsible for the assembly, and the low-level technician is responsible for combing the assembled large parts to establish a spiritual power channel, which is mainly sold to the factories that manufacture low-level civilian mechas, and the middle and senior technicians can use the mental power to establish the channel while assembling, just like the armor makers mentioned in Mr. Huang's lecture, and these large parts are mainly sold to the factories that manufacture intermediate mechas.

As for the parts required for high-level mechas, there are requirements for a high effective application rate, and basically no orders will be placed with ordinary factories.

Of course, Ning Yunshu can't build a spiritual power channel while assembling now, she just wants to be able to assemble it proficiently first.

It is estimated that Manager Wu is afraid that Ning Yunshu will not be skilled in his work and has a high failure rate, so the No. 7 large parts sent today are the No. 7 parts that Ning Yunshu trained and assembled yesterday.

There are 11 small parts in each group, in order to avoid mistakes, Ning Yunshu opened the light screen on the work table, called up the drawings of the No. 7 part, recalled the feeling of yesterday, and began to assemble.

The difference between formal work and training, only 20% of the assembly failure rate is allowed every day, and wages will be deducted if it exceeds it, because the large parts that fail to assemble have to be separated by workers before they can be used again, if the spiritual channel has been established, it will be scrapped directly, and it is N times more difficult to modify the channel than to establish the channel.

The installation of each No. 7 part requires more than a dozen steps, Ning Yunshu completed each step carefully and accurately, in the morning, the parts sent by the transport truck were used up 9 groups, except for one group that failed because it was too tired and distracted, the rest were successful, she didn't know if her speed was up to standard, but she had done her best.

At noon, Ning Yunshu happily went to the canteen to bring an easy-to-digest porridge and vegetables, and finally was able to eat a meal openly, even if the taste was average, he was still very happy.

After eating lunch in the workshop, Ning Yunshu continued to assemble parts, with the increase of experience and proficiency, her speed gradually increased, and after a short time after getting off work, she finally finished assembling 25 sets of parts, and the parts assembled in the afternoon did not fail.

Ning Yunshu notified the management through the communication instrument, telling him that the work had been completed, and the management checked the records and found that there was only one unqualified, nodded appreciatively, and said: "There is only one failure on the first day of work, yes, promising, I thought you would assemble until midnight or the failure rate is very high." ”

Ning Yunshu smiled and thought, no wonder your factory stipulates that you must complete a group every day to be paid full salary, and the slow ones will work overtime until midnight.

After Ning Yunshu returned to the dormitory, the sky was dark again, and no one was there, in the past few days, the people in the dormitory had always left early and returned late, and Ning Yunshu only faintly heard what kind of "trial" it was? However, it was convenient for Ning Yunshu to avoid them from entering and leaving.

"Rotating, shaking, reversing ......" Ning Yunshu is concentrating on assembly, after 2 days of work, she no longer needs to look at the drawings, she can immerse herself in the fun of assembly, her fingers are flying flexibly, sometimes, she will involuntarily compare with the mechanical assembly of the twenty-first century, guessing what is the difference in their assembly principles, why they are assembled like this, thinking about which part of the mecha they are applied to, what effect this assembly will bring to this part, etc., and will not be bored at all because of the repetitive action.

With the increase in proficiency, she can now commute to and from work on time, and as long as she is not distracted, it is 100% successful, and each part can be assembled in about 20 minutes, which is much faster than before.

After another three days, Ning Yunshu reduced the time to complete a No. 7 part to about 15 minutes through hard work on the premise of ensuring the success rate, but then, Ning Yunshu found that when she wanted to speed up again, she was a little overwhelmed, the steps were completely proficient, and what to do next had been known in advance, but the fingers had to have a certain amount of time to complete the previous step, and the hand speed could not keep up. And she has practiced typing, she knows that hand speed can not be improved in a day or two, she used to assemble machinery when she felt that her hand speed was good, but she didn't expect to use it when she hated slowness.

She didn't know that her speed had surprised Manager Wu, who was observing her behind the monitor, that the No. 7 parts skilled workers could easily do one piece in 20 minutes, so the factory only set 25 groups as a day's amount, and it was just about eight hours after completion, and a few workers could shorten the time again, but it took a long time to accumulate and temper, and Ning Yunshu only took 5 days.

After thinking about it, Manager Wu dialed a communication.

Ning Yunshu didn't know that someone was watching her, after she finished today's workload 2 hours in advance, she returned to the dormitory early at 3:30 o'clock, and boarded the virtual network, she had some doubts and wanted to find Teacher Huang to answer, when she arrived, Teacher Huang was in class, so she listened carefully to the small half of the class and waited for the end of the class.

"You've now increased the assembly speed of the No. 7 part to 15 minutes?" After class, Teacher Huang was surprised when she heard Ning Yunshu's question, of course, she knew the average time to assemble each part, so she was surprised by Ning Yunshu's progress.

"yes, but I just can't increase my speed. Ning Yunshu said with a wry smile, on the one hand, she was happy for her progress, but on the other hand, she was worried about the stagnation of speed.

"You've made a lot of progress, and in just five days, you've shortened that time to a time that no other skilled worker might be able to achieve. Teacher Huang was both surprised and happy: "Teacher is right, you are really talented." ”

"Is there any way to improve it further?" Ning Yunshu humbly asked.

"15 minutes is already the accepted minimum, unless you can improve the existing steps. Then Mr. Huang shook his head and denied this suggestion: "But it is very difficult, the current assembly drawings of large parts have been optimized a lot under the improvement of Ms. Xuanyuan Mingzhu, and I want to make further progress...... The teacher doesn't recommend you to delve into it now, there are more than 400 kinds of level 1 large parts, and your first task now is to assemble more types of large parts to lay a good foundation, only by understanding their structure thoroughly, can you learn how to sort out and establish a spiritual power channel?

After listening to Mr. Huang's words, Ning Yunshu felt suddenly enlightened, knowing that he had entered a dead end in the past few days, and if he wanted to become a armor maker, being proficient in assembly was only the first step, and there was still a long way to go, and he should not abandon his roots.

"Since you're already familiar with Part 7, I'll teach you how to build a spiritual power channel for Part 7. Mr. Huang clicked on the light screen to bring up the drawings of part No. 7 and projected them on the blackboard.

The first one is the assembly drawing of the No. 7 part that Ning Yunshu is very familiar with these days, and the second and third ones she has not seen, Mr. Huang explained:

"The second one is the mental power channel drawing of Part No. 7, and the third one is the overall perspective view of Part No. 7, you can observe and see what the relationship is. Mr. Huang also added a reminder: "This part is used for the wrist part of the mecha." ”

Wrist ......

Ning Yunshu looked carefully, the assembly drawings only drew the surface of the parts, the channel drawings drew the inside of the parts, and the perspective drawings combined the two, with more and more chaotic lines. From the outside, it looked slightly flattened cylindrical, but assembled she knew that there were a lot of flexible connections inside.

Slowly combing down, Ning Yunshu's eyes lit up, and found that the channel is not simply connecting 11 parts together, but like the meridians and blood vessels of the human wrist, the most effective and efficient channel is built to ensure the smooth operation of the palm and arm.

Tell Mr. Huang what he thinks, and Mr. Huang nodded yes and said, "You can now try to build a spiritual channel on the assembled parts, and when you are proficient, you can try to build a channel while assembling it." ”

"The parts made by these two methods must be different. Ning Yunshu had a wit, otherwise, why pursue the latter? The efficiency of division of labor and cooperation will not be faster.

"Xiao Shu, you are so smart!" Teacher Huang felt that he really liked this student too much, and he could draw inferences from one another, nodded, and said: "Yes, the effective application rate of the parts made by the division of labor is much lower than that of the one-time completion, and it can only be used for low-level mechas." ”

She took out a piece of wood and used her spiritual power to mark the pattern and shape of the spiritual power channel of the No. 7 part inside, and asked Ning Yunshu to establish the channel according to the route.

After some time of exercise, Ning Yunshu has become very proficient in the use of mental power, and he usually uses some things to change the material and dig holes and carve exercises.

The establishment of the passage is not to hollow out the material, but to use the spiritual power to change the nature of the material belonging to the location of the passage, so that it can more easily and smoothly accept the passage of spiritual power, so as to control all parts of the mecha.

Ning Yunshu twisted the spiritual power into a thin rope and touched the wood, and in the inner perspective, the texture, density, and channel marks of the entire wood could be seen clearly, controlling the spiritual power to enter, and distributing the spiritual power evenly on the wood at the location of the passage like a needle inserted in the seams, so that that part of the wood and spiritual power were mixed together and assimilated into different materials.

Ning Yunshu had good control, and the passage only went crooked twice, and it was successful.

Teacher Huang took out another assembled No. 7 part and gave it to Ning Yunshu.

The parts that come out of the virtual network are almost the same as in reality, the metal material of the mecha is very dense, extremely hard, and the wood is not the same as whispering, when using mental power to assimilate metal, it has to be used to move forward, the force is small, but the passage is crooked, and after more than a dozen attempts, it has not been successful, and it has been tried again, and most of it has been completed, but the light brain suddenly reminded her that Li Qingyang's time for class was up.

There was no way, Ning Yunshu said goodbye to Teacher Huang and got off the virtual network.