Chapter 0753: Refining the Armband

Inside the Magic Chamber.

Bright but not dazzling, pure white magic lamps illuminate every corner of the place.

In front of a sophisticated high-grade alchemy table, Grim was carefully pouring molten liquid fire-disgusting iron from a magic cauldron into a metal mold. When they were in a semi-condensed state, he picked up the carving knife and carefully engraved the magic patterns and rune lines on it.

This fire-disgusting iron is the best metal material Grimm could find to make a magic armband, and its melting point is as high as 9327 degrees. Due to their high hardness and superior magic resistance, Grim could only successfully carve the grooves of the Flame Witch Circle on them while they were in a semi-molten state.

And in order to avoid being quickly parsed out by clever wizards to parse the content of the witch array above, in addition to the normal attack witch array, energy gathering circle and auxiliary runes, Grim also needs to add some decorative patterns and lines to the entire witch array system to disguise the original function.

And all this must be done while the liquid fire aversion iron is in a semi-condensed state.

Grim estimated that it took about 210 seconds for the boomband mold to be fully condensed. During this time, Grim had to complete 13 Attack Circle, 25 Gathering Circles and 421 Support Runes, as well as 74 Magic Pattern Engravings.

It is difficult to imagine how difficult it is to engrave so many contents in miniature on a piece of metal armband, which is 70 centimeters in diameter and about 30 centimeters wide. And more importantly, the whole process has to be done in one go, without any pauses in between. Otherwise, once the Fire Disgust Iron cools down, even if you use the magic carving knife that has been enchanted with the 'Sharp Technique' and the 'Armor Piercing Technique', you probably won't want to cut a single inch on it.

"Reduced the temperature of the Magic Flame by 7 degrees ......"

Grim departed a little spiritual link to the alchemy table's central control crystal, lowering the magic flame of up to 9,800 degrees by an imperceptible 7 degrees.

"No. 3 Auxiliary Witch Array Activation ......"

Grim let out a little more spirit and adjusted the alchemy table settings according to the chip's instructions.

"Magic Knife Infusion Complete ......"

After activating the sharpness and armor-piercing effects attached to the magic carving knife with his mental power, Grim gently carved the tip of the knife on the surface of the semi-molten armring with an astonishing residual temperature under the instructions of the chip. With a slight movement of the wrist and the dexterity of the fingers, the hard magic knife that emitted a misty yellow light began to move and twist imperceptibly on the surface of the armband.

The lines and grooves engraved by it are thin and thin, but dense and continuous. For an ordinary person, if you don't use a high-magnification magnifying glass, you can't even see clearly, but Grim often needs to engrave a complete three-dimensional witch array in an area the size of a grain of rice.

In order to accomplish this difficult task, Grim's black pupils are as blue as stars, and he has taken the scanning and magnification functions of the chip to the extreme.

The surface of the armband, which was originally only 30 centimeters wide, has been magnified 3,000 times by the chip, and in Grim's eyes, it is wide enough for him to splash on it at will. However, correspondingly, the magic carving knife, which was originally as thin as a cicada's wing, was now like a thick stone pillar, looking unusually heavy.

Grim manipulated the magic knife with his nimble fingers and wrists, allowing it to quickly toss and turn on the surface of the armband in accordance with the blue lines indicated by the chip. In this process, the force of Grim's wrists and fingers must be consistent, otherwise the lines and grooves carved by the knife will be of different depths, which will greatly affect the function and effect of the finished product in the future.

However, at this moment, the bottom tire of the armband is still under the terrifying high temperature of six or seven thousand degrees, and touching and controlling the armband at such a close distance is not because Grim is a second-order fire witch, I am afraid it will be difficult to stick to it accurately.

Due to the magical properties of the Fire Iron, it has an exceptional resistance to scorching rays, which makes it difficult for Grim to choose to paint manually. Fortunately, with the experience of etching the crystal nucleus of the magic golem in the past hundred years, Grim still completed his work without danger.

With a light breath, Grim carefully held the semi-finished product in his left hand, and with his right hand, he picked up a puff of golden quartz sand powder and spread it on the surface of the arm ring. With bursts of brilliant golden light, most of the quartz sand was absorbed by the armband, and began to make its surface yellow and clear, looking extremely dazzling.

Quartz sand is a commonly used gathering material in the production of witchcraft, and it can also be perfectly fused with fire-disgusting iron, and there will be no elemental repulsion effect between them.

When all this was done, Grim began to browse the half-finished Fire Emblem armband in his hand with confidence. Yes, this is not the final form of the Tier 2 Witchcraft Fire Emblem Argil, but only a half-finished piece.

This is a delicate armband made of dark red fire-disgusting iron, and the energy-absorbing substance contained in it echoes the free elemental particles in the environment, so that its body is always surrounded by a faint layer of bright red light.

Its exquisite shape and appearance are the final scheme determined by the chip after referring to tens of thousands of witchcraft of the same type, and the complex witch array engraved on it has been optimized and adjusted hundreds of times by the chip.

Looking at this exquisite work of art, Grim's eyes were a little intoxicated!

After playing with it for a long time, Grim reluctantly placed it gently on the velvet tablecloth of the alchemy experimental table.

The bottom tire of the flame emblem armband has been completed, and the follow-up only needs to completely melt the best fire agate and inlay it into the dense grooves on the surface of the armband with a special technique. Of course, before that, it is also necessary to prepare those fire dragon blood into suitable neutralizers in advance, which is also quite a labor-intensive thing!

According to a preliminary estimate, if you want to complete the Fire Emblem Armband as soon as possible, you will have to work hard for at least a month. After the last expedition, Grim completely understood that only by equipping the two-piece set of the Flame Throne could he be more sure of his plan to explore the fire elemental plane.

While thinking about the daily schedule for the coming month, Grim gently rubbed the corners of his forehead with his hand, and a tingling pain faintly came from his brain.

Although the refining process just now was only a short 210 seconds, it made him highly nervous, and the work of refining the bottom tire of the arm ring was quite mentally draining. So at this moment, once Grim's mood relaxed, he was a little mentally tired.

With a wave of his hand, extinguishing the magic flame on the alchemy table, cutting off the magic energy supply of the Wu Tower to the alchemy table, and not bothering to sort out the messy alchemy props and utensils, Grim yawned and rubbed his eyes before walking out of the alchemy laboratory.

It's time for a good rest!

…………

Snake Bird Cliff.

The afternoon sun shone through the lush foliage on the meadow beneath the cliff.

The three-headed snake bird cub frolicked in the verdant meadow, while the other two-headed snake bird cub lay tired in a grass nest and fell asleep soundly.

Most of the adult snakes, birds, and beasts have gone out to feed, and only two females remain on the cliff to guard their nests. They lazily crawled in the cave on the cliff wall, basking in the sun, poking their heads out from time to time to check the young beasts at the bottom of the cliff.

In the innermost corner of the cave wall of the nest behind them, seven or eight white snake bird eggs with some pale yellow spots were spread all over the grass nest, and some gnawed animal bones were scattered around the periphery.

Within a radius of seventy or eighty miles of this mountain cliff were the hunting areas of snakes, birds, and beasts, and those overly ferocious beasts or monsters had already been expelled by them to farther places. Therefore, even if most of the adult snakes, birds and beasts have gone out to hunt, the two female beasts who stayed behind are still not worried about the safety of this snake and bird cliff.

"What a chance...... Good opportunity......"

Peeling aside the artemisia grass in front of them, several apprentices of the Shadow Light Squad peeked at this peaceful and peaceful world, and their hearts were simply bubbling with beauty.

The adult male snakes and birds are not there, and there are only two females in the house, which is simply good news!

After waiting nearby for two days, the apprentice team that finally found this opportunity immediately started work without hesitation.

GomogomoGomoGomo......

With a strange metallic chirp, a metal chick emerged from the Black Forest with stiff steps and appeared on the green meadow half a mile away.

The three playful snakes and birds were immediately attracted to attention, stopped the pursuit, and prostrate themselves to look curiously at this strange creature that they had never seen before.

The little ones did not feel the danger or fear of it, so they did not immediately flee back to the lair.

The metal chick flapped its metal wings, swayed its golden body, walked around the edge of the meadow, and then suddenly screamed and turned and fled back into the Black Forest.

Seeing this, the three-headed young beast that was cool to kill immediately flapped its thin wings excitedly and chased after it.

Three of them and one of them disappeared quickly into the Black Forest......

Moments later, a female beast resting at the mouth of the cliff's nest poked out its serpentine head again. This time it was shocked, and was horrified to find that the three young beasts were missing from the meadow.

The female immediately raised her neck and screamed, and the strange screams were very crisp with the crispness of bird creatures and the hissing murmur of snake creatures.

The terrible scream immediately echoed near the cliff.

The next moment, the two-headed snake bird female beast flew out of the nest and began to coil around the snake bird cliff and fly high and low, anxiously looking for the missing three young beasts.

The two sleeping young beasts woke up and fled back to their nests in panic.

The two females landed on the grass, their serpentine heads spitting bright red snake letters, and soon detected the whereabouts of the three young beasts in the air.

After a shrill hissing and exchanging words, one rushed back to the nest to stay, while the other rose into the sky and chased away in the direction where the scent of the young beast had dissipated.