Xiong Wenbin looked at Zhang Xiaofan very seriously, and felt confident on Zhang Xiaofan's face.

Xiong Wenbin nodded lightly.

"Very well, just rush to your spirit.

I want to support you, if your effect can reach the current ninety-percent, I will not hesitate to change the production process and use your products. ”

"Thank you, Mr. Xiong. ”

Zhang Xiaofan's sincere thanks, this is not a compliment.

Many industrialists, although they have been shouting loud slogans for innovation, are still very wary of action, and it is very easy to hold back.

For their own company's very mature production process, no manufacturer is willing to give up this mature production process and improve the use of other production processes.

Whatever your reason, they don't want to take the risk.

They won't change unless someone holds a knife around their neck.

Or this process makes their products not competitive in the market, and after they are slowly eliminated, they suddenly realize that they want to come over and innovate, and it may be too late at that time.

At present, in the entire wheel market, all wheel companies will use the same process.

And basically all the coatings used by wheel hub companies are oil-based paints.

Therefore, the process used by Fangnan wheels has not been eliminated by the market, and no one has asked them to change this process.

But today, Xiong Wenbin assured him that as long as Zhang Xiaofan's product quality meets the current standard of oil-based coatings, then he will not hesitate to change the production process and use Zhang Xiaofan's products.

It's a recognition and a support.

"You don't have to thank me, I should thank you.

Oil-to-powder, according to what you said, is definitely a trend.

And in the future, the government will definitely become more and more strict about the emission of this solvent, which is absolutely beneficial and harmless for our company to lay out in advance.

And as a soldier, it is also our responsibility to contribute to the cause of environmental protection.

So I should really thank you for making me realize that there is such a paint as that, a paint that is very friendly to the environment.

Although your current technology is not up to the requirements, you are willing to work hard to develop it, and I see your confidence.

Young people should be motivated, and you're good. ”

"Thank you, Mr. Xiong, I am really happy, Mr. Xiong makes me very confident that I can complete this task. ”

Deng Xiaoni, who was sitting next to her, also saw a lot, and watched Zhang Xiaofan grow up along the way.

Although Zhang Xiaofan seems a little lazy now.

This is Zhang Xiaofan's requirements for details have not decreased, but are getting higher and higher.

Although he doesn't seem to go to the technical department very often, he still maintains a high level of attention to technology.

Since Zhang Xiaofan has decided to personally lead the team to study, he has no lazy mind at all.

To study the wheel, the overall process needs to be divided into three steps.

So there have to be three teams.

The first one is the filler primer, which determines whether the next two layers of paint are smooth and perfect.

The second team is naturally R&D, metal glitter silver powder, this team, Zhang Xiaofan is ready to keep an eye on, this is the most important part, if this paint can't come out, then the entire wheel spraying link can not be established.

The third team is the transparent coating for wheels that is currently being developed, and at this time, it is enough to pay a little attention to it, and Liu Qi can basically solve the problem.

Monday mornings will meet as usual.

However, he only entered the technical department, and the personnel came to the office one by one, and Zhang Xiaofan was late in the end.

"Meeting. ”

Because he had to sort out some information, Zhang Xiaofan came late, but Zhang Xiaofan didn't explain anything, because this thing didn't need to be explained.

"I've just received a big project that is even relevant to our future direction.

So today's morning meeting may be a bit long, and the personnel of the technical department have already arrived.

I am very happy that you can come to work in our company, and your contribution to the company has been in my eyes for so long.

The company has been established for less than three years, but my investment in scientific research has always been very large, and you should also feel this.

Actually, I don't think we should be called the technology department, we have three doctors, seven graduate students, 24 undergraduates, and more than 70 assistant researchers.

From our company, the current product basically completely crushes the products of other companies in the market, I know that you have put in the effort, and the results are very obvious. ”

When these people heard Zhang Xiaofan say this, they were naturally in a better mood, but it was very strange, didn't they say that you took on a project?

There are not many R&D achievements in large projects of the Technology Department, but for the control of some details, the depth of R&D is very eye-catching.

The products of Zhimei new materials, even if they are products of the same price, take a variety as an example.

Ordinary indoor white highlights.

This is one of the most common paints on the market and is very common.

We can often see it in many places, such as air outlets, such as chairs, such as shelves.

The gloss of general manufacturers is basically between 85 degrees and 100 degrees.

It is made of the most beautiful new material, and the gloss reaches 110 degrees.

In fact, after the gloss level reaches 100 degrees, it is relatively difficult to improve, but the technicians of Zhimei New Materials, through their own efforts, have screened out very, very suitable raw materials, and in the production process, they have made slight adjustments to slowly increase the gloss to 110 degrees.

And that's not the main thing yet.

For high-gloss paints, the gloss may appear high when measured by an instrument.

However, when you look at it with your eyes, the gloss is not very high, and it is basically impossible to print the figure backwards.

We rarely see white light that can reflect the human figure, but the most beautiful new material can be inverted, although it is more blurry.

This is the progress of technology, although he has not improved much in terms of the actual performance of the product, but it has improved a lot in terms of ornamentation.

This is also why the bright products of Zhimei New Materials are easier to attract people than other manufacturers, because of its high ornamentality.

"Okay, let's get down to business, this time we're developing a whole process, and it includes three coatings.

The first is the transparent coating for wheels that Liu Qi is currently presiding over the research and development.

The second is our more common silver glitter paint, which is better than the previous ones and very technically difficult, so this group will be led by me.

The third type is simpler, primer. ”