Huang Changsheng's factory is the largest. The annual output value is more than 100 million.

Compared with the other three, Huang Changsheng's machine tool is also relatively new. There is one that someone else has used for five years. Most of the machine tools used by others are more than ten or even twenty years old.

Looking at West Lake Province, they are actually small shrimps.

Even within the bearing industry, they are not big names.

Buying a brand new machine tool is almost impossible. Especially the more high-end machine tools, the price is extremely expensive.

Seeing that Yan Ruzi was not there, Wang Buan quickly slipped away.

The group came to Huang Changsheng's factory.

Before getting out of the car, Wang Buan's heart was half cold again.

I thought that a few of them could be regarded as the level of the district team and the county team.

Unexpectedly, it was completely a straggler!

The central enterprise is the national team.

Large private enterprises are regular troops.

Medium-sized private enterprises are Tubalu, county brigades, district squads, guerrillas, and military engineering teams......

The others are stragglers.

It just so happens that the four of them belong to the last.

Low-end bearings are hardly profitable. They tried hard to extend upwards, but they were met with a lot of resistance.

Raw materials, machine tools, software, technology, talents, market ......

Everything needs to be hard to develop.

Domestic CB7360C bearing groove precision lathe......

Domestic ZXH1300 disc milling machine......

Domestic 3MK143 servo bearing outer ring groove grinder......

"That's all?"

"That's all. ”

There are only a few relatively new machine tools.

The others, almost all of them are old-fashioned models. The machining accuracy can only be accurate to 0.1 mm.

What are the requirements for high-precision machine tools?

At least 0.005 mm.

That's a 20-fold difference.

The accuracy standard of some old machine tools is only 1 mm!

Internationally, there are already a lot of machine tools that can reach the standard of 0.001 mm. That's about 1 micron. The higher ones are nano-scale lathes.

It's a long way off!

It's almost the distance between the Earth and the Sun.

How to catch up?

Raw materials alone will not work.

The bearing is a supporting project. In addition to raw materials, what is more needed is precision machine tools.

Then there's the sophisticated control software.

Then there are the skilled workers.

Have it?

Yes!

But it's all with someone else.

Now, all Wang Bu'an has is crude machine tools, old software, and absent-minded workers.

Because of the lack of orders, Huang Changsheng's factory is almost on holiday. Only a few young people who usually perform well, have potential, and are willing to study hard are still pondering milling machine technology in the workshop.

Among the more than 100 people, there are only a few who can go to the Tao. The rest of the people may be out of the way at some point.

When some workers resigned, they didn't even say hello and just left.

The only thing that is commendable is that every corner of the workshop is clean.

This at least shows that there are still people who take great care of their workshops and are willing to take the initiative to do hygiene.

Attitude matters.

Wang Buan is very satisfied with this attitude.

If you don't even have the most basic attitude, what's the use of giving you the most advanced technology?

How did the Sino-Japanese War fail?

At all times, it is the people, not the weapons, that decide the final victory!

"One, think of a way. ”

"You let me kill someone first......"

"Find a way. ”

"Okay. I don't have enough permissions. It can only be strengthened to improve the precision of these machines or something. It is impossible to transfer a brand new lathe. ”

"Then step it up. ”

"Good. ”

Wang Buan stretched out his hand and pressed a machine tool.

Robot Elf No. 1 quietly began to move. The light, which cannot be observed by the naked eye, silently envelops the whole body of the machine tool.

The metal used to make the machine tool is highly compressed, more stable and stronger.

The bearings and drill bits have also been strengthened.

The base, the pillars and the like are also greatly strengthened.

The most important thing is precision.

The machining accuracy of the machine tool has been greatly improved.

With the strengthening of each part of the machine tool, the gaps, position differences, fluctuations, vibrations, and impact forces between each other are greatly reduced.

Its accuracy has been improved to 0.001 mm. That's the limit of the old machines. It's also the limit of the ability of the No. 1 robot elf.

To achieve greater accuracy, the entire machine had to be transferred from the planet Cybertron.

"The machine tools we have over there are basically level 19. Robot Elf No. 1 said with a little disdain.

"What nineteenth level?" Wang Buan frowned.

"It's nineteen zeros after the decimal point. The unit is nanometers. ”

“……”

Wang Buan was speechless.

What is the number that the No. 1 robot elf said, he has no concept at all!

But what does it feel very, very powerful?

"By the way, how much faith does it take to make a machine tool that can make a machine tool?"

"Look what type it is. Start at least 1 million. ”

"Aren't you moving from industry, why are there so many restrictions?"

"If you are not sincere, it will be a waste to transfer the property to you. If you have everything at your fingertips, how can you cherish it?"

"Okay......"

What others said made sense, but Wang Buan was speechless.

1 million is 1 million! Anyway, I'm not in a hurry! I'm only in my early twenties. What are you anxious about?

There will be a day when you accumulate 1 million faith points.

Step up your game!

Step up your game!

Keep picking up girls!

Keep up the day!

"Smack!"

"Poof!"

During the hardening process, the system shuts down automatically.

Several young workers who were operating were a little panicked, thinking that the machine tool had been damaged.

"It's fine. ”

"It's fine. ”

Wang Buan waved his hand, "It's none of your business." ”

Huang Changsheng was stunned and said, "What are you doing? Why did the machine automatically shut down?"

"I was a little bit of a trick with the machine. ”

"Huh?"

"The quality has been strengthened, the precision has been improved, and the software has been updated. ”

"What?"

Huang Changsheng was stunned for a moment.

Wang Buan's words, he heard every word. However, he could not understand it.

What does it mean to improve precision?

What does it mean to have updated software?

There are no technical personnel on site! The parameters of the machine tool cannot be modified by ordinary people.

"Nothing has changed!"

"The parameters and software are the same!"

Huang Changsheng personally checked the operating system and found nothing abnormal. It's exactly the same as before.

Indeed, the system software is not much changed.

It's just that the units have changed.

Previously it was 0.1 mm.

Now it's 0.001 mm.

There is a difference of two zeros between the two numbers. That is, the difference in precision is a hundredfold.

"You guys go ahead. ”

"Oh. ”

Several young workers started the lathe again.

Bearing coats were produced and piled up in plastic baskets next to them.

Huang Changsheng subconsciously felt as if there had been some strange changes.

However, it is impossible to say what kind of change it is.

Wang Bu'an did not explain further.

"It's okay, you go on. ”

"I look around. ”

Wang Buan said casually, "You guys wait for me in the office." ”

"Good. "All four of them couldn't ask for it.

They are not willing to follow Wang Bu'an for a walk!

This guy seems to be in front of every machine tool and seems to stop and observe for a while.

What's so nice about the machine? They're tired of looking at it.

In fact, Wang Bu'an is strengthening the machine tool.

The No. 1 robot elf can only be an enhancement of one machine tool at a time.

This function is called maintenance. Actually, it was for the machine teleported from the planet Cybertron. However, it can also be used on other machines.

However, since it's called maintenance, it's not possible to make much change.

It is impossible to fundamentally change.

Before dinner, Wang Buan completed the strengthening of all 138 machine tools.

The precision is all increased to 0.001 mm.

He returned to the office.

"What are you doing?" asked Lin Wudong curiously.

"I have carried out technical upgrades and technical transformations on all the machine tools. Wang Buan said lightly, "In the future, they will all be treasures." ”

"Really, how did you do it?" Lin Wudong was skeptical.

Others are also skeptical.

Huang Changsheng, in particular, felt unbelievable.

"Come with me!" Wang Bu'an said, "I'll explain it to you in detail." ”

"Okay. The four of them hurried to follow.

A group of people entered the workshop.

Wang Buan came to the oldest machine tool.

The nameplate on the machine tool shows that it is produced by Dongying. It's been fifty years. It was the first lathe owned by Huang Changsheng. It's really old, very old.

"The precision has improved. ”

"Now the precision is 0.001 millimeters. ”

Wang Buan skillfully manipulated the software and explained it to everyone straightforwardly. The four of them finally understood. That's a great thing!

You know, if you want to break into the international market, it is impossible to do without a high enough precision. I can't even cross the threshold.

According to the international standard, it must be at least 0.01 mm or more. or 0.005 mm.

Before, Huang Changsheng's factory was difficult to receive international orders.

Now, at last, there's a chance.