"There will be no time after that. "Wang Bu'an slipped away.

He rushed out of the gate like a gust of wind, opened the door, got in the car, started, kicked the accelerator to the end, and drove away.

Behind her, Princess Hulu was dumbfounded, and her mind went blank.

"Huh, where is Wang Buan, why is he gone?" Beigong Yanying happened to come from the side and said unexpectedly.

"him to death!" Princess Hulu squeezed out four words from between her teeth.

"Hmm, what's going on? He can't stand it?"

"He's insane!"

"Huh?"

Beigong Yanying was completely confused.

I said, what the hell are you two doing?

This is a fitness center! It's not a Hengdian film and television base. Why can't you keep up with the changes in your plot?

was about to ask what was going on, but found that Princess Hulu also left angrily.

Beigong Yanying looked around, and then looked at himself.

Does it have anything to do with yourself?

I don't think so......

Wang Buan galloped all the way back to his alloy factory.

Well, there are already a lot of people here.

Fang gradually of Hongcheng Heavy Industry brought a lot of technicians.

They are carefully studying each machine, hoping to discover the mysteries.

Unfortunately, they checked for a long time with no results.

The machine itself did not have even a single screw, and there was simply no opportunity for further inspection.

The control program of the machine is in the hands of Wang Buan. On the machine, there is not even a button. They have absolutely no chance to do so.

The only advantage is that you can inspect a wide variety of products to your heart's content.

For example, various alloys.

Take polyimide, for example.

Of course, there are all kinds of carbon fiber, ceramics, copper alloys, memory particles, etc.

Wang Bu'an walked over with a gloomy expression.

Fang Jianming was a little excessive.

These machines belong to him, Wang Buan.

The people of Hongcheng Heavy Industries, who are unscrupulous in testing here, have they consulted him?

Asking people in the house and worshipping the gods in the temple is the most basic courtesy.

"Mr. Wang!" Fang gradually walked up in a big way.

"Hello. Wang Bu'an grimaced.

"I want to buy all your machines. Fang Jianming said bluntly.

"Ten billion dollars. Wang Buan nodded.

"What?"

"Ten billion, dollars. ”

"Mr. Wang, you're joking. How can it be so expensive?"

"It's something I made myself. I can sell as much as I want. If you can't afford it, don't squeak crookedly. ”

"I ......"

Only then did Fang Qingming realize that Wang Buan was angry.

It seems that he is indeed a little self-acquainted? I haven't communicated with Wang Bu'an before, so I'm busy in his territory.

But is it necessary for you to be so angry?

Study your machine, and you have nothing to lose.

"I'm sorry, Mr. Wang, we are also happy to see the hunt. Fang Yanming said euphemistically, "If there is anything wrong, I apologize to you, apologize, okay?"

"Thank you. Wang Bu'an said coldly, "These machines, even if they are given to you, you will not be able to operate them." ”

"That's impossible. Fang Qingming shook his head and said, "What we have is talent." ”

"Then you can try it. Wang Buan sneered.

Fang Qingming was a little embarrassed.

The other party's attitude is obviously resistant.

His anger couldn't help but come up gradually. Isn't he the boss of Hongcheng Heavy Industries?

Looking at the whole country, in terms of heavy machinery, Hongcheng Heavy Industry can definitely be regarded as the first echelon. This time, I led a team to West Lake Province to discuss cooperation, and West Lake Province also sent a senior official to receive it. How old are you, Wang Buan? Don't you just have a few machines? It's still such a dilapidated machine, what's the big deal? The tail is about to rise to the sky?

If it weren't for Wei Yunfei's face, he wouldn't have bothered to take a turn here.

Still cooperating? Lao Tzu will cooperate with you? Dreaming!

"Let's go!"

Fang gradually beckoned stupidly.

Everyone withdrew immediately.

Each of them had a sample in his hand.

Some are hard alloys, some are storage particles, some are barium titanate ceramics, some are beryllium bronze, and some are carbon fiber......

Wang Bu installed it and did not see it.

If you take the sample, you will definitely be itchy in the future.

After you have tested the sample in detail, you will realize how wrong your choice is today.

It's a pity that at that time, if you want to regret it, I'm afraid it's too late.

The person who succeeded you Hongcheng Heavy Industries has appeared.

Just after Fang Jianming led the team to leave, another team of people appeared.

"Hello. My name is Liang Penghai. ”

"Hello. I'm Wang Bu'an. ”

"I'm from Qianzhou Heavy Industries. ”

"Yes. ”

Wang Buan nodded casually.

Qianzhou Heavy Industry and Hongcheng Heavy Industry have always been a competitive relationship.

Although the competition between the two sides is not very fierce, they still have to compete with each other. If one side fails, it is easy to be eliminated by the market.

Liang Penghai, the boss of Qianzhou Heavy Industry, is actually the number one person.

What characters?

Antagonist.

That's right, it's the villain.

He has been plagued by negative press many times. What is marrying a female star, divorcing a female star, which female star is a junior again, and the company is ready to file for bankruptcy......

On top of that, this guy is only thirty-three years old this year. Sitting on a 10 billion group, it is simply a winner in life.

There were once rumors that North Li Nanliang. Bei Li was once the richest man in a province.

Although Nanliang is not as high-profile as Bei Li, he is not inferior in terms of philately for female stars.

Even, the two of them are fat and have squinted eyes.

Beili relied on the steel group to start, and Nanliang relied on heavy industry to start.

The main business of Qianzhou Heavy Industry is actually a little different from Hongcheng Heavy Industry.

Hongcheng Heavy Industry is mainly excavators, loaders, construction machinery.

Qianzhou Heavy Industry used to rely on construction machinery to start, but later found that the competition in the market was too fierce, so it entered another field.

This area is the internal combustion engine.

Mainly diesel internal combustion engines.

In this industry, the leaders are Yuchai and Shangchai.

Qianzhou Heavy Industry can only be ranked third. But Liang Penghai is a chicken thief, and he mainly focuses on one field, that is, large diesel engines.

Don't think that those big trucks pulling 50 tons or 100 tons use large diesel engines. Not really. The real large diesel engines are used on ships.

Before nuclear power came out, the power of diesel engines was maximum. Most of the large ships run on diesel engines.

Including those oil tankers that are often hundreds of thousands of tons, as well as container ships or something.

Of course, Qianzhou Heavy Industry does not have that much ability to produce those super terrifying diesel engines.

Which is the largest diesel engine in the world?

Wärtsilä from Finland with the RT-flex96C super-large engine.

Fourteen cylinders!

The displacement of the single cylinder is 1820 liters.

Single cylinder power 7780 horsepower.

The total power is close to 110,000 horsepower. APPROXIMATELY 80,000 kilowatts (KW).

Isn't that a terrifying number? Yes, it's terrifying. The diesel engine alone weighs 2,200 tons. Fuel consumption of 15,000 liters per hour (can't afford to burn).

Two such diesel engines are capable of driving a huge aircraft carrier (such as the Kitty Hawk before the US imperialism). The use of steam turbines in aircraft carriers is to consider the needs of many aspects, such as steam catapult, etc. If it is purely considered from the power aspect, it is better to install a few more diesel engines. Four diesel engines, more than 300,000 horsepower, simply not too sour.

The Emma-Maersk, the world's largest container ship, is powered by a Wärtsilä RT-flex 96C engine. With nearly 110,000 horsepower, the Emma Maersk can sail at speeds of up to 31 knots with a full load of 11,000 TEUs.

As the saying goes, a good horse deserves a good saddle. The requirements for cargo transportation will increase with the weight, and if the fully loaded Emma Maersk is nearly 200,000 tons, if the engine does not provide continuous power, the timeliness and safety of the cargo will not be guaranteed. The time taken by this ship to travel from China to California in the United States is 4 days shorter than that of a regular container ship. Friends who have done transportation know that time is money in this industry. Four days will be a very big watershed.

Of course, Liang Penghai doesn't have that much ability.

He focuses on the 50-200 kW range.

It can be used for heavy trucks and small ships.

The point is, there aren't that many competitors in this class. Continuing up, that is the main scope of shipbuilding heavy industry.

"Boss Liang, where are the beauties around you?" asked Wang Bu'an unceremoniously.

"Recently, money has been a bit tight, and they don't want to follow me anymore. Liang Penghai said with a wry smile, "No money, who wants to play with you?"

"Are you in trouble?"

"A little. ”

"Can I help you?"

"Yes. I need four samples. Crankshafts, camshafts, flywheels, impellers. ”

"Yes. Give me the technical requirements. ”

"Okay. ”

Liang Penghai handed Wang Buan a USB flash drive.

There are specific technical parameters inside. Among them, the crankshaft has the most parameters, and the technical requirements are also the highest.

After all, it is the main core component of the internal combustion engine, and quality is paramount. It takes the force from the connecting rod and converts it into torque, which is output through the crankshaft and drives other accessories on the engine to work. The crankshaft is subjected to the combined effect of the centrifugal force of the rotating mass, the gas inertia force of periodic change and the reciprocating inertial force, so that the crank bearing is subjected to bending torsional load. Therefore, the crankshaft is required to have sufficient strength and rigidity, and the surface of the journal needs to be wear-resistant, uniform and balanced.

In a word, it's tough enough. No matter how you toss, it will not be deformed, torn, or misplaced. It must be with the best steel and the best processing technology to forge the best crankshaft. However, as far as the current technical situation in China is concerned, the real high-end and long-life crankshaft cannot be produced independently for the time being.

Crankshafts are difficult to machine.

Because it's irregular.

It must be a high-end CNC five-axis linkage machine tool.

This is the test.