0160 Manufacturing

Thank you for the reward of Haoxia 1 children's shoes again.,Add a more chapter.,Uh,There's really not much to save the manuscript......

******

On the way, Xu Yi also found a rain gear store on the edge of the market, bought rubber gloves, a rubber raincoat and a pair of water sheaths before returning to the village.

At dinner, Xu Yi cooked a pot full of rice, and fried two large plates of green vegetables, and after eating, he put the remaining green vegetables on the steaming curtain of the rice cooker and kept warm directly.

Time passes too fast in the space, such a large amount of work, I don't know how long it will take to finish, I can get through it without sleeping for a while, but I can't stop eating, or wait until I'm hungry to cook.

Xu Yi has always believed that the better the preparations, the smoother the work can be.

Xu Yi looked at the notebook, the videos he downloaded before were all finished, waiting for a good rest, Xu Yi directly hugged the notebook and the power cord into the space.

Plug in the notebook, find the videos related to the key points and precautions of woodworking tools in the downloaded videos, and study carefully.

Xu Yi also found that this is a good idea, to study in the space for a month, and only to use one day outside, if you are preparing for the exam, as long as you go into the space two days before the exam to read a book! Of course, there is a premise for this: if you stay in this space for a long time, it will not affect your health.

After watching the video, Xu Yi took out the piece of paper he had before and put it in his notebook, and then moved the iron shelf to the edge of the table little by little.

Xu Yi found a thick board from the board he bought, carried it and spread it on the iron shelf, moved it back and forth, left and right, placed it in a suitable position, squatted on the ground, took a pencil and drew a pencil in the screw holes used to fix the above components on the iron shelf, and marked it on the board.

Xu Yi turned the board over, then drilled the corresponding thickness holes with an electric drill according to the drawn mark, and then fixed the board to the shelf with screws.

After assembling, Xu Yi tried to push down the wooden board, and found that it didn't move at all, so he couldn't help but nodded, and then at the end of the board, he drilled a hole with a small wooden square sawed down, and installed it on the board below with screws, making a small backer, and a simple carpentry workbench was ready.

Xu Yi did not make a ten box according to the Lang's beehive, after all, according to the current demand, at least dozens of bee spleens are needed to accommodate the existing bee colony, if it is packed in a standard box, this successor box is only afraid to be stacked three or four meters high, how to manage it at that time, and how can bees think of living in such a beehive?

Therefore, Xu Yi spent half a day, and finally decided to make this beehive according to the specifications of the three Lang's beehives horizontally and together, and the hive door was opened on both sides, and the middle of the beehive was the queen bee area, so he would not make the hive door, and only install the king separator on both sides to prevent the queen bee from running out, and the structure and bee path inside the beehive were completely based on the Lang's beehive standard.

It's just that Xu Yi doesn't know if this will lead to overheating inside the beehive, so the hives on both sides are open through, and the ventilation volume is larger than the original Lang's beehive, if it is really overheated, the place where the bees fan the wind is also big enough, if he sees it, he will also find a way to help them solve the problem, anyway, the temperature in his own space should be constant, and the problem of the temperature in this beehive is relatively easy to solve.

However, this specific situation is still waiting for the time to do the test, anyway, there are electronic thermometers that can measure the temperature inside the beehive, but this is to avoid changing again and again, this is still waiting for the bee colony to stabilize dìng.

I designed this hive myself, and the first floor is enough to install 30 bee spleens, so that one hive can hold at least 60,000 bees.

Regardless of its final effect, Xu Yi is going to make a few more relay boxes of this specification and standard height, as for how to do the beehives in the future, it depends on the number of bee colonies to stabilize and calculate how many bees can be in this group.

At that time, I should be able to plant a good tree in this beehive.

For the time being, if the three layers are not enough, Xu Yi is ready to directly install it higher, and install a four-layer and five-layer relay box!

Carrying a few more boards and laying them on the workbench one by one, Xu Yi took a ruler and a pencil and drew the required panels one by one on the board according to the size he had calculated before.

After drawing the line and checking it to make sure that it was correct, Xu Yi took out the handsaw and prepared to cut the material.

The marking line on the board is the exact size of the beehive, and if it is done in this way, it will be a good beehive.

However, Xu Yi just put the saw blade on the wood, thought about it and gave way to the outside of the line, and then began to saw.

After sawing for a while, Xu Yi was a little surprised, who said that hardwood is difficult to process, isn't it quite easy to saw?

After thinking about it, Xu Yi could only attribute this to his own body, and his own saw was not bad, it was an imported alloy saw, the saw blade was sharp, and it was easy to get started, and after sawing for so long, the saw blade was only slightly hot.

After all, it is a double-edged saw, so it is easier to grasp in the straight direction, but there are some problems with the angle in the vertical direction, as a new hand, the hand is not stable enough when pulling the saw blade back and forth, which will inevitably make the saw shake left and right, so the guide zhì saw is not so vertical, some inward, some outward, but fortunately, there is no place more than the pencil line.

Xu Yi looked at it, and couldn't help but be a little glad that he was not so blindly confident, and saw it directly online, this wood is easy to saw, and it is not so simple to take it back again, this is a beehive after all, even the glue Xu Yi bought after weighing the milky white glue, and it would rather work slower than have too much impact on the bees.

"Huh. This board was sawed, Xu Yi moved a board again, and suddenly had an illusion that this wood didn't seem to have the same big smell as before.

Xu Yi picked up the board that had just been sawed off and smelled it, it was true, there was still a very strong smell at the saw mouth before, but it had become very light after a while, and it was not as heavy as the smell of wood before, and there was no smell on the wood at all!

Could it be that this space can decompose flavors?

Obviously not, the strong floral fragrance is still around, but the chemical smell of this board has disappeared, especially the freshly sawed wood is more obvious, it seems to be an automatic decomposition of harmful smells.

This is a good thing, I still want to wait for the finished thing and then take the activated carbon and sprinkle it in the beehive to remove the smell, now it seems that there is no need at all, and then buy any toxic furniture in the future, you can put it in the space to taste it.

It is said that practice makes perfect, after all, Xu Yi has to make two beehives, and after a few small situations, after wasting a little material, he still brought down the material, especially some boards sawed later, and the saw road was very straight, not bad at all.

However, all the sawn wood has a trimming thickness, so it is necessary to use a planer to remove the excess wood from the outside of the pencil line to make the size up to standard.

For this planer, Xu Yi naturally knew it in his heart, so he simply took a useless board, stood it on the ground, and directly took the long planer to dig it on the façade.

Sure enough, as expected, the length of the blade had to be readjusted.

Xu Yi adjusted the length and angle of the planing blade a few times according to the method above in the video, either the planing blade could not eat the material, or the planing blade was too deep to eat the material, and it was stuck and could not be pushed, or it was simply biased, this planing blade could only eat half of the wood, and it was not until a dozen times that this was adjusted more appropriately.

Xu Yi turned the planer over, remembering the length of the planing blade in his heart, so that if he sharpened the planing blade next time, it would be much easier to put the planing blade on again.

Xu Yi learned the basic gestures and steps little by little according to the demonstration on the video, and after spending a long time, Xu Yi pushed down with a planer, and the shavings fell like snowflakes, as thin as cicada wings, rolled together in circles, and the side was as smooth as a mirror.

After checking the shavings, Xu Yi nodded, and then took a small wooden square that was ready to be made into a nest frame and put it on the workbench and planed it, but after three or five clicks, a wooden square fully met the design requirements.

After trimming all the parts, Xu Yi went out of the space to have a meal, and then came back to prepare to make the nest frame and assemble the beehive.

Xu Yi reached out and took a set of nest frame materials, and then used a fine drill bit to drill the hole through the wire, and after the hole was drilled, he had to take the hollow nail to inlay it, and then put on the wire after the nail was nailed, so that the nest foundation could be installed again.

Xu Yi took a beam and put it on the workbench, then took a nail and pressed it on a head, hammered it down with a hammer, ready to nail the nail through and then nail it to the side beam.

However, as soon as the hammer went down, Xu Yi only heard a soft "snap", and the wooden strip cracked directly from the nail hole to both sides, and it was obvious that this beam was scrapped.

Xu Yi looked at this thing like this, and couldn't help but have a little headache, he knew that this was the case, it would have been better to buy fir directly from this nest frame at that time, but he still didn't think about it at the time.

However, thinking that this should be because of the stress of the nail tip to guide the wood to split, after thinking about it, he didn't encounter this thing before installing the workbench, Xu Yi brought the electric drill over, and then drilled the hole with a thin drill bit that was a little thinner than the drill bit just drilled, and then drove the nail in, sure enough, this is the case, Xu Yi reached out and shook the combined frame again, which was still very strong and would not loosen.

However, although the structure of this nest frame is simple, just a few nails, but after all, this has to be on the iron wire or something, and the total number is even more, Xu Yi went out to eat two meals in the middle before he finished these nest frames, and the full pot of rice was all eaten!

After that, Xu Yi nailed up the beehive and the relay box, and did it in one go, but there was nothing wrong.

Although he had been mentally prepared, after waiting for Xu Yi to get it done, he couldn't help but smile bitterly at the large stack of oversized beehives and relay boxes in front of him.

For mobile phone users, please read it on m.qidian.com.