Chapter 177: Magical Axe (3rd Update)
The entire head of the current prince dragon is covered in plaster, and only two plastic hoses are exposed, which are inserted into the nostrils for ventilation.
I wonder if Mike found Prince Dragon's safe, or something like facial recognition, or else he could have done so much?
This method of plaster rubbing the face is not difficult, but I have never heard of such a thing before.
When I was a child, many small vendors on the roadside would use leather goods to fill plaster, which could make all kinds of beautiful animated characters, and could also make gypsum products such as piggy banks.
But it's the first time I've seen plaster on people's faces, and it also shows me the horror of human greed!
Jennifer held a hair dryer and kept blowing. After about an hour the cast had solidified, my arms were sore, but I still wondered what they were going to do next.
I've never seen anything like this before. It's similar to a human skin mask, but it's different, and maybe I'll learn a trick from it!
When the plaster had solidified, Carrera took out a wire and polished it horizontally from the top of his head, unsurprisingly cutting the plaster in two.
The steel wire is very slender and will not destroy the overall structure, and the horizontal cut will not destroy the line of the face, and even the ear position is vacated, and a steel wire is slowly polished.
Every time the wire was pulled, some of the plaster powder was worn off, and Carrera was patient and careful, knowing that he wasn't worried about the death or life of the prince. He just needs to keep the plaster intact.
The wire is cut horizontally from the top of the head to the back of the ear, then down the neck to the shoulder, and from there it is disconnected.
The whole process took about half an hour, and Carrera carefully removed the first half of the plaster, which was a full face plus neck!
The sticky substance just applied to it has a lubricating effect, and the plastic paper is convenient for separating the plaster from the skin.
When Carrera removed all the plaster cast from Prince Long's face, he was already sweating profusely, and it could be seen that he was very serious and very physically exhausted.
A rubbing model of the head is done, and then the inside of the plaster is treated, and then the new plaster is poured.
I watched without saying a word, it was not a difficult technique, and I secretly remembered every process, as long as the materials were prepared and I could complete it.
The plaster that had been poured into the model dried much faster, and it was placed in the air conditioner to blow violently, and this time everyone could rest.
Time slowed down at this moment, and before I knew it, it was dawning outside.
I don't understand why you want to make a plaster avatar, if you need facial recognition or something like that, just pull the prince dragon away?
When the plaster is completely air-dried, slowly remove the outer mold. A standard plaster head is presented in front of you, and it looks exactly like the face of the prince dragon!
The plaster head is not treated except for the eyes and hair parts, and the chin and lips look exactly the same. It's a god!
Any camouflage technique is not as good as this one, because this is a template made directly on a person's face, and it is completely a replica!
The one-to-one replica restores the appearance of the person to the greatest extent, which is different from making a wax figure, because it is directly reproduced on the head of the prince dragon!
Everyone took a short break and had breakfast, and they felt a lot of strength when they were full, and they didn't know how long it would take for this plaster head to be completed.
After eating, Carrera pulled out a kit full of files of different sizes, some of which looked like screwdrivers. Some are like toothpicks.
The tool looked professional, and Carrera began to trim the position of the eyes and some details.
At this moment, I realized why he measured Prince Long's face before, and every data had to be accurate!
A one-to-one replica of the face shape is OK. But a small deviation can give a different feeling!
Time passed slowly, Carrera's movements were very careful, and little by little the repairs were very slow, and even ten minutes would not be filed.
The revised plaster avatar has become very realistic, and Carrera is still counting the values of each area, and then gently modifying the plaster ......
When Carrera lit a cigarette and rested after the modification, he spent the most energy in the whole process, and he also gave people a frenzied feeling.
The plaster was modified and then sanded, which Carrera carefully sanded. It looks like you're carving a piece of jade!
I was amazed at the power of this technology, I was shocked at how good it was, but I didn't know what they wanted this plaster head for.
Now that the prince dragon is here, if there is a need, it can be done directly on his head, is it necessary to reproduce a plaster head separately?
Could this be a quirk on Mike's part? He wants to reproduce the head of the prince dragon as a souvenir?
Jennifer and Carrera didn't say anything, I didn't ask, sooner or later I'll know what this avatar is for!
When the plaster head is polished and smooth, it starts to apply viscous lubricating oil, and it looks a little sticky, and I don't know what to do next.
When the plaster head is done, start spraying. A high-pressure bottle that looks like a self-spraying paint is evenly sprayed on the plaster head.
It's just that the color of the spray is white, because the spray is slow and there is no flow of paint, and I spray it again and again, and I don't know how many times I spray it repeatedly.
The whole plaster head looks much smoother and rounder, even as lifelike as a person, but the skin tone is pure white.
Half an hour later, the plaster head was put into the oven, and at this moment I understood why I didn't use the head of the prince dragon directly, because it is impossible to put a human head in the oven!
It's easy for them to reproduce the face of the prince dragon, but it's hard to put it in the oven, and this plaster head is meant to replace the real head!
Now it seems that they have no intention of killing the prince dragon, perhaps because the human head will deform when put in the oven......
Carrera let out a long sigh of relief when the oven started working. Jennifer lay straight on the bed.
"That's it!"
I didn't even say anything about lighting a cigarette, I didn't know what it would look like when I was done, but I knew I had just made a human skin mask!
The material of the mask should be the material sprayed by the high-pressure bottle just now, and I can't read it in English, but that doesn't hinder my judgment.
There is an additional high-pressure spraying process when making the template twice, and this process should be the real purpose.
This mask is different from the eight-faced one. This is a mask that wraps in all directions, and even the hair covers it, and you can't find any seams from your face!
The human skin mask will have seams. The underside of the nose and behind the ears are the most visible spots, even if they are cleverly camouflaged.
I don't know how good they are at making human skin masks, but I'll see!
Time passed slowly, and I leaned back on the bed to rest and recuperate, and I was deprived of spirit by not sleeping.
Two hours later, the oven was ding, and I opened my eyes at the same time. I don't know what kind of human skin mask you will see.
Carrera took out a plaster avatar, and at this moment there seemed to be an extra layer of skin on the avatar, white and yellowish skin!
I was shocked by the skin on the plaster head in front of me. It's as if you really have a layer of skin, and all those sprays are solidified!
"It's amazing!" I couldn't help but exclaim, because this is almost exactly the same as the prince dragon!
"Damn Asians, skin color still needs to be adjusted. ”
I wasn't happy to hear that, what are the damn Asians? How many people have been killed with this special rod?
"Hey, hey, hey, I can't sleep and complain about the crooked bed?
I looked at Carrera with a defiant face and scolded the imp in front of Hades, isn't this a clear display of eye medicine for me?
"Adjust it first, and then spray paint it at the end. Jennifer rounded, and Carrera turned and pulled out her laptop.
Jennifer tore open the plastic sheet wrapped around the prince's head, but she didn't expect the prince's dragon to wake up!
His eyes were filled with horror, and for a moment he didn't have time to pretend to be asleep, and he couldn't hide the excitement of the light.
"Good boy, get some more sleep!" Jennifer quickly knocked him unconscious, not giving him any chance to speak.
Just now the prince woke up, so he could hear the conversation between us, and I wonder how he would feel when he knew that he had been remade......