When not far from the sword-forging furnace. You can hear the sound of clanging bells from that direction, and the sky is only slightly white. Several disciples of the Sword Sect have already risen. Iron training is carried out here.

When stepping in. The disciples all looked at him with strange eyes, but none of them stepped forward to stop him from entering. Probably Shi Dali or the old man had already ordered.

Step into the sword-forging furnace. Inside, only Shi Dali was pounding on a red subway block with a hammer, and heard the sound of 11 pushing the door in. Shi Dali glanced up at him, nodded and said, "You're here." "Look at him like this. I don't know if the people thought they had made an appointment in advance.

He said very simply: "I want to forge a sword." ”

Vigorously put the red-hot subway block back into the stove, put down the hammer and said, "Are there any materials?"

"Nope. ”

"Oh. That's okay too. Uncle Fourteen said that you can choose the materials in the sword casting furnace warehouse. After a pause, Shi Dali asked again, "Do you start today?"

"Now. ”

Shi Dali nodded and said, "Yes." Let me first explain to you the process of forging a sword. Sword casting is roughly divided into six steps, modeling, dispensing, smelting, casting, tempering and final processing and cutting, and making a model is to make a sword mold. Generally, mud and stone are used as molds. But our side is different. It is made of talc. In this step, you need to think about what kind of sword you want to cast, and the decoration process in the future, all of which are engraved on the sword model in advance. Remember to be evenly matched. After that, it's time to dispense. It is the allocation of the amount of materials. It depends on what you use as the main ingredient. The ingredients are then matched in a certain proportion according to the main ingredients, not more or less. It's hard to grasp this if you don't have experience, and I can help you. The next step is smelting, where all the raw materials are melted into molten iron, and the impurities in it are removed at this stage when it is easy to cast. After that, the molten iron can be cast into the sword to take shape. But at this time, it was still a sword blank, and the iron density was not pure. The need is tempering, the most difficult is this step of tempering and quenching, quenching can further remove impurities and harden iron, but this degree should be grasped well, not more, more is hard, extremely rigid and easy to break, a good iron will become scrap iron. And no less. Less is not up to the mark. In addition, it is continuous tempering, and the general disciples need to strike iron in the outer house for more than eight years before they can start to enter the inner furnace to cast swords before they can start to forge swords in the inner furnace, mainly to train them to control the strength of this step of tempering, but you don't need to. So Uncle Fourteen instructed me. If you're going to forge a sword, I'll help you. ”

"Look. Shi Dali picked up the tongs and picked up the piece of the red-hot subway block that had been burned from the stove and said, "If the iron is forged, it will be strong." If you want a good mouthful, you need to keep refining it. Remove most of the impurities inside. As for how much you can remove, it depends on your control and experience. Tempering is a very complex process. It has to constantly hit the sword body without deforming the sword, removing impurities and making it harder at the same time. A good sword can only be a good sword if it has been tempered repeatedly, so if you want a good sword, you have to temper it alone. It is possible to play several or even a year and a half, and it takes a few days to cast a sword and a year to cast a sword, I think you also understand the truth, right? It doesn't have to be too heavy. It's useless if it's light, but if it's heavy, it will deform the sword. Deviate from your original design. If it is deformed, it needs to be smelted and cast from scratch. Finally, the cutting process is mainly to sharpen the edge of the sword and carve it with decoration, and install the hilt and scabbard of the sword. It depends on personal preference. The swords of our Sword Sect are rarely fancy, and what we need is practical. ”

"Alright. That's all there is to it about the sword-forging process. Don't take my words lightly. If you really want to forge a sword. It's impossible to strike iron without more than 10 years of experience, but don't worry. I'll help you with the work of precision. The next step is the raw material for forging the sword, what raw materials do you need to use?

"There are no other requirements. It's just a little harder. It is not easy to cut out the gap. Also, the sword body should be black. It can't be shiny and it can't reflect light. ”

"The first step is to say, and what is needed is time to temper it repeatedly. If it is paired with good raw materials, I am confident that I can help you create a good earth sword, but the second step......" Shi vigorously furrowed his brows. "There are many ways to make the sword lustreless, and the most direct way is to mix some special raw materials at the beginning. But this way. The material of the sword will change. Unable to meet the requirements of the original schedule. Or. You can paint the sword after it comes out of the oven?"

Shaking his head and vetoing, he said, "No." The smell of lacquer is easy to detect. And it peels off after each battle, and it's too cumbersome to repaint. ”

Shi Dali pondered for a long time: "In this way...... Not. I'm going to think about the ingredients, right. What kind of ingredients are you going to use?"

"It doesn't matter. ”

Shi Dali shook his head and said, "You can't be sloppy about this. The sword and ground materials are destined to suit your sword moves. If your sword moves are mainly elegant, then you need to use light metal to forge a ground sword. Lightweight. If you're a slasher, you'll need to be tight, hard, and thick. ”

Said: "Isn't your Sword Sect going to find the material by yourself?"

"Yes. Not right either. Shi Dali explained: "If the disciples of the Sword Sect want to forge swords, they need to go into the mountains to mine by themselves. Then refine the sword, there are a few nearby mountains with ore veins that have been excavated, you can go in and dig as you like, but if the mountains don't have the materials you need. You can dig up the equivalent ore and take it to me for the raw materials you need, for example, you need ten meters of ore to exchange one cent of the raw material for one of the dark iron raw materials from me. This is to let the disciples of the Sword Sect have a sense of belonging after the sword is baked, and only the things that they have personally made from beginning to end can have a true sense of belonging. ”

I didn't ask Shi Dali where those special ores came from, and I didn't have to think about it to know. Every once in a while, daily necessities come in. Of course, there will also be special ores that are needed for the Sword Forge Furnace.

Shi Dali said again: "To build a good sword." Raw materials are important. The raw material of a sword is destined to be suitable for its swinging moves, or. What is your main attack? Uh, well, you attack me. Let me take a look at your sword moves to help you choose the right ingredients for you. ”

Didn't speak. Just looked around, there were many broken swords in the sword-casting furnace, all of which were defective products after casting swords and testing swords. Staying behind to prepare for the re-smelting of the forg, these swords come in a variety of styles. But the length is around three feet. Not for him. In the end, 11 could only pick up a severed sword, with only one hilt and the blade of the sword, which was less than a finger's length on it, and used as a dagger for the time being.

He gripped the hilt of the sword with his backhand, tried the angle at which it was easy to swing the ground, and then said no, and suddenly slashed the stone into the neck with a sword.

Shi Dali seemed to be prepared, and casually drew a remnant sword from the side and slashed towards 11 as well.

"Ding!" The two swords collided and a wisp of spark. And the two swords also collapsed at the same time.

With this move alone, 11 is very different from 6 Xuan's vigorous attack method. 6. Xuandi sword moves are mainly skillful. Shi Dali is mainly a strong opponent. If it were 6 Xuandi at this time, he wouldn't be so hard-hitting. Instead, avoid its edge first. Then unload your strength and spare your strength, and use your skill to break his attack.

Really. Everyone in the Sword Sect has their own unique moves, although the sword moves are the same. But everyone's understanding is different. For example, if you have a square circle, you can draw a circle, and you can pay equal attention to attack and defense. If it is made by 6 Xuan. It will definitely use a circle to unload the force and attack in a square, and if you change the stone strongly, you will use this trick to castrate. When the circle reaches the apex, it will slash down with a hard sword, which will give birth to an unstoppable momentum, which is how everyone understands the sword moves differently. Perform different moves. At the same time, it is also the Sword Sect's requirement for every disciple under the sect.

In the casting furnace, 11 and Shi Dali have attacked each other back and forth for more than ten moves, and at first Shi Dali was only on the defensive, but his sword moves have always been attack-oriented, plus 11's step by step pressing. He was a little scrambling several times. Especially 11 ground attacks. Every time it's like fighting for your life rather than fighting. After a few moves. Shi Dali reined in the precipice and gave up the idea of underestimating the enemy, and also launched a string of attacks.

It's just that Shi Dali didn't expect this young man who was specially taken care of by Uncle Fourteen to attack so sharply. It's not a sword parcel move at all. Or rather, there is no one school of moves. His attack was very direct and crisp, that is, he only aimed at the vital parts of the quasi-human body and stabbed it with a sword. Don't ask for a one-hit kill. They don't even care about what kind of harm the other person will do to themselves. It's all about fighting with your life.

After the two fought a few more moves, Shi Dali swung his sword. Forcing 11 back, he also withdrew his sword and said, "It's okay." I kind of know what kind of sword you're needing. ”

He didn't take advantage of the situation to attack. Just stood there and replied lightly: "Oh." ”

Shi Dali thought for a while and said: "Your earth sword style is mainly light, fast, and ruthless, mainly for the body method. Not. In this case, a long-handled sword is not suitable for you to wield. You do need short weapons. ”

Throwing away the remnant sword in his hand, the sword body and the sword body in Shi Dali's hand were already full of gaps. It was caused by the two of them just fighting. He said, "Dagger." ”

Dali also put down the ground sword in his hand, nodded and said, "Indeed, a short weapon like a dagger is very suitable for you." style and stencil you need to carve yourself. As for the raw materials...... You are accustomed to stabbing and slashing, and your defense is also hard blocking, and you have no skill. So. The sword you need has to be hard. Strong toughness and not easy to collapse. ”

I thought about it for a moment. Shi Dali said: "In terms of raw materials, I think bird gold is more suitable for you. This metal has a high toughness. It can have a high hardness with a small amount of dark iron, and then a small amount of lead is attached...... But here's the trouble. How do you solve the problem of not having a luster if you want?"

Scratching his scalp in distress, Shi Dali smiled bitterly: "I'll help you think of a way, but Bird Gold has high requirements for tempering skills, and it is not easy to create it perfectly." It takes a lot of time. ”

"How long will it take?"

Shi Dali thought for a while and said, "It will take two months at the shortest. There was a pause. And he added: "No less." We have very little stock of bird gold, and we usually use it as an additive for processing. Never been a main ingredient. You are the person whom Uncle Fourteen takes special care of. So I don't care. Now I have a lot of bird gold in my warehouse, and if I mix it with other accessories. I can only barely give you a dagger. It's so hard to find that I don't want it to go down in my hands. ”

Nodding his head, "Yes." "Although there is still a lot of work to be done for him outside,1 he does need a weapon at his disposal. After the Heavenly Slash was taken away by that mysterious middle-aged man, his strength dropped a lot. If there was a heavenly slash in his hand at the beginning, it would not be so easy for the war spirit to easily win him. However, after coming to the Sword Sect, watching the 6 Xuan Lian Sword every day has enlightened him a lot, and he now has a weapon that suits him, and he can often wield greater power. The shape of the sky and the earth is simple, and it is more suitable for using thorns. 11. You need a weapon that can work with the Sky Slash to swing and slash the ground. So he would rather stay two more months than miss this opportunity.

On the other hand, he is not worried about the cold night and the monkeys. If they really don't even have this ability to protect themselves, they might as well die. As for Fat Duck and Dowell. This can be regarded as a test for them, and there will be many more battles like this in the future. If you can't even get past this time, there is no need for them to join. It's just a pity that Dowell, to be honest, 11 is very interested in his psychic ability, if Dowell can be better displayed in this regard, his role in the team in the future will be like a frenzy. There is no substitute.

It's just that 11 didn't know. this time. Cold Night and Dowell are leisurely soaking in the hot springs. Talking about beautiful women. The monkey and the fat duck were still not heard from. Life and death are uncertain.