Chapter 168: Melting and Questioning
"It's the [Ring Base Resonance] structure, look at my mouth shape, ring-shape-" In the card-making classroom, Ed, who was walking back and forth, stopped next to a sweaty third-grade boy and said to him in a long tone:
"Ring-shape-"
The boy had already turned on the tools on his melting table to assist in perception and measurement, but he still couldn't carve the correct shape after listening to Ed's meaning, and the sweaty third-year boy was even more nervous when he heard Ed's voice beside him.
"It's a ring, it's not a square—smack!" Ed was shocked by something: "It's not a triangle!"
The boy also realized that his mistake was irreparable, and reluctantly withdrew his hand (touching the magic card with his hand can enhance his perception), and sighed as he looked at the gray card on the melting table.
"Congratulations on getting a waste card that you can use to practice drawing circles. Ed mocked mercilessly, but still put a new gray-white card on his melting table: "Nono, give you a new one, hurry up and finish the circle before merging the carving!"
The sweaty boy hurriedly began to practice on the waste card, while Ed continued to patrol the classroom, his eyes mainly on the second-year students, compared to the middle and upper grade students, there were only a few mistakes, and the second-year students with poor mental strength seemed to be in a hurry.
"Ring! Not barrel! Don't you have a concept of thickness!"
"Look at my mouth, what are round lips? It's a ring! It's not a polygon! There's no edge!"
"Tsk, can you be a little thicker!Did you look at the size marked?!Can the boy carve a little thicker?!"
"Curved surface melting!Curved surface! How can I get out of shape as soon as I get the operation, but I can resist it!
"What did I just say? There are three points of convergence with the surroundings! Look at the ring you carved to connect to the surrounding structure? ! No, why?! Because the ring you carved is too small, too small to understand, too small, too small!!
I have to say that Master Ed is still very enthusiastic about the class, at least when it comes to correcting students' mistakes.
Of course, despite Ed's disdain for the mistakes the students made, he still gave each of them a new card, but it wasn't long before he was heard clearing his throat and saying, "It's an honor to tell you the exciting news that the cards I prepared are shining!"
"From now on, students who make mistakes again can only practice on the waste card until the end of class. ”
This "exciting" news did have an effect, and Cleo, who was sitting on the right side of the classroom, trembled when he heard the news, and then let out a miserable scream:
"My ring!"
Looking at the irretrievable sharp edges and corners he had carved out of the [Annular Basic Resonance] structure, Clio Cowley hurriedly looked at Professor Ed, who put on a helpless expression.
Morin almost trembled when he noticed this scene, and quickly returned his attention to the cards.
Not to mention, even though they only needed to carve the simplest ring on the entire card, it still felt difficult. First of all, it is necessary to control the melting carving knife, and not let it deform in the process of melting and carving, and secondly, it is necessary to pay attention to the speed to be relatively uniform, and it is also difficult to melt and carve out the ring without edges and corners, and there is also the problem of the carving knife and the crystal card material.
According to Teacher Ed, this simple [Curved Melting Knife] is specially used to fuse and engrave zero-order crystal cards, that is, it is specially used to fuse and engrave zero-ring magic on this gray-white crystal card. The problem is that the texture of the crystals is not completely uniform, especially since these low-level card crystals contain a lot of impurity particles. Once the curved melting knife touches the impurity area during the process of melting and carving, it will most likely be like hitting a stone when cutting jelly, resulting in deformation or skewed nicking.
As a result, Morin advanced the melt knife at a slower speed to ensure the stability of the notch.
So far, about half of the ring structure has been completed, including two melting points, and the boy has not made any obvious mistakes for the time being.
The image of dynamic spells will not appear on the surface of the unfinished magic cards, and Merlin roughly perceives the overall spell model, and judges that this should be the zero ring magic [Flash Technique] that he is most familiar with.
Don't look at it as just the lowest-level card, but what the boy learned from the relevant books told him that magic card making often needs to be done in one go, and he hasn't seen anyone in that book who can stop and give the rest of the structure to others to complete during the card making process like Ed, or then merge it later, and the key is to keep the card useful, which is a great thing.
Therefore, Mo Linrong carved it extremely carefully.
From this detail alone, it can be seen that Ed's ability to make magic cards is extraordinary, and he deserves to be called a master card maker, which is much more reliable than his ability to eliminate "eyeshadow".
"Watch the speed!" Ed's voice rang out from the side.
"You're too slow! too fast, no, too slow, it's not good!"
"Didn't we say before, the slower the speed of the knife advance at the moment of melting, the greater the change in the nature of the crystal card, in other words, the deeper the nick left, which will lead to the intimacy or rejection of the notch's affinity for mana. And the structure you want to carve, [annular base resonance], has certain requirements for the speed of melting, too fast or too slow can not be successful, there is time to look at others is better to take a good look at the front of the process logo!"
Mo Lin's heart froze, he stabilized the melting knife, and slightly accelerated his advance speed.
The Rongketai Marcus next to him also lost his mind to look around.
As the lesson drew to a close, bursts of light flashed from the surrounding melting tables, and the boy knew that it meant that there were students who had successfully completed the magic cards in their hands.
And everybody's got all the glitter cards.
At the end of the process of making magic cards, some of the magic structures in the magic cards are often stimulated to form incomplete magic, and skilled card makers can often control this magic to avoid causing damage to the surrounding area, but the students in this classroom are all laymen, so they naturally flash around.
Fortunately, the light released by the mutilated flash technique did not cause any harm.
"The current students who have completed the course are all middle and high grades, right?" said Ed, who sat back on the podium and crossed his legs.
Those who had finished looking at each other did not notice the faces of the sophomores.
Whether it is the condensation link of [arc surface melting knife] or the melting and engraving link of crystal card, they all have high requirements for spiritual strength and perception, and it is natural for middle and senior students to complete it earlier.
"Although you have successfully completed the completion of your first magic card, and most of you have not made any mistakes, please don't be too optimistic about the future, say you!
"What's your name?" asked Ed.
"Pilson, Professor, my name is Pilson Ponte. The boy who came back to his senses quickly stood up and replied.
"Do you know how much time it took me to complete the engraving?"
"About ...... Forty or fifty mils?" replied Pilson, with a happy smile on his face.
"Then do you know what percentage of this [Ring Base Resonance] is in all the structures that need to be fused in this magic card?"
Pilson shook his head in confusion.
"That's it!" Ed pinched his thumb and forefinger together, "It's just a little bit, you've done far less than a hundredth of a percent of your work in just approaching an Orr, and you've carved a card." ”
"Do you think this kind of efficiency can be called card production?"
Pilson shook his head and began to pack his things.
"What are you doing?!" Ed was stunned.
"Uh...... Aren't you going to let me out?" Pilson said confusedly, "I'll pack my things first...... Ed paused, then said angrily, "Put your ass back in place!"
Pilson sat back in his seat but didn't put down the package he had packed, apparently thinking that Ed would let him out next.
Ed ignored him, sat on the podium and took out a gold coin and played with it in his hand: "If you have taken a course on business, you should know a word called 'Pro's Gold Coin Conversion Efficiency'. ”
Hearing the word business, Aeno immediately pricked up his ears.
Generally speaking, second-order professionals can accumulate one hundred to three hundred gold coins of magic power in a month through meditation, which can probably fill one to three fourth-order magic crystal cards with magic power, while third-order professionals can probably accumulate twice as many gold coins in the same amount of time. ”
"When a professional is engaged in a sub-class, if the conversion efficiency of gold coins is lower than that of meditation, it means that this sub-class cannot create more value, for example, your third-year classmates, even if you can skillfully make zero-level cards, but if you can accumulate 500 gold coins a month by meditating and 100 gold coins a month by making zero-level cards, this is quite worthless. ”
The senior students usually have a deep understanding of this aspect, and they all nodded in agreement.
"In the card maker world, especially when you can only make low-to-mid cards, the biggest challenge is how to make gold conversion efficient. Therefore, even if the production of zero-level cards is not too difficult for senior students, do not rashly think that you are very talented in card making, please refer to what are the requirements of the corresponding card maker at the lower level of magic level. ”
While Ed admonishes the older students not to be too proud, the second-year students complete the engraving one after another.
There is only one last connection point left for Morin to be completely completed.
He sensed his ring notch, which basically met Teacher Ed's request, so he advanced the arc melting knife condensed by spiritual power to complete the last part of the ring, and at the same time just intersected with a conical structure next to it to form the last connection point.
It was done, and the boy breathed a sigh of relief.
But...... Why isn't there a flash of light......
Maureen frowned again.
"Hah!" Clio, who was sitting on the melting table in the back, laughed subconsciously.
He had been paying attention to Merlin for a long time, because his own cards had been carved out and there were no other cards to practice on the cards, so Cleo hadn't spent much time looking around, especially Morin, who had been waiting to see his jokes for a long time.
He didn't believe that this guy who couldn't even use magic cards could have any talent in the field of card crafting.
If Senior Bob opened a gamble with this, he would definitely put a lot of money on the bet that Morin would not be able to make even a zero-level magic card even if he succeeded, after all, he couldn't even use it.
Although everyone knows that Merlin often goes to Anna Gu's magic tower to make up for lessons, and may occasionally get guidance from Master Ed, but it is all about the history of magic or ancient spell casting, so when he saw Merlin from behind during class, Clio almost laughed on the spot, and he thought about how to publicize it for a long time.
As expected, just now, Mo Lin was relieved that he had clearly completed the engraving, but the magic crystal card on the engraving table did not have any light, and this guy failed.
"Haha!" Cleo couldn't help but laugh.
He should have recorded Morin's expression with an image stone just now, and he thought with some regret that he must bring an image stone with him when he goes out in the future.
"It shouldn't be......" Merlin ignored Clio's laughter.
No matter how you look at the [Annular Basic Resonance] structure he carved, it is similar to what Teacher Ed marked in the image in front of the classroom, not thick, not thin, not big, not small, not round, no edges and corners, but why is there no flash like others, what is wrong......
The young man took the gray and white card in his hand and looked at it for a long time, and then subconsciously introduced some magic power, and then remembered that he couldn't use the magic card, so he had no choice but to ask Ed for help.
"Is Maureen done?" Ed noticed the teenager.
"The Melting Carving is indeed done, but—"
Before he could finish speaking, Ed beckoned to take the gray and white card from the boy's hand, and then a hint of joy appeared on his face, and Merlin assured that it was a happy expression, if Papa Pike's years of teaching were not wrong.
"It's ok, nicking isn't a big deal. Ed commented.
"Is it really okay?" Hearing Ed's evaluation, Morin was also puzzled, obviously the card didn't light up just now.
"Is it really okay?" Cleo in the back row also asked loudly, "I was just paying attention, his cards don't seem to be shining, Professor, I must have failed, right?"
Ed was stunned for a moment, and then said angrily: "In the end, am I a card maker or are you a card maker?!
Cleo's face turned the color of pork liver.
"I'm not convinced! You are clearly biased in favor of him!" he whispered: "Obviously, the card carved by Morin Rong does not shine, you must say that there is no problem with his nicking, there is no problem, you can use it!"
Clio's insistence amused Ed, and he chuckled, "Okay, then close your eyes." As he spoke, he threw the flash card engraved by Morin in his hand to Emino in the front row: "You try it, see if it can be used." ”
Everyone closed their eyes, except for Clio.
This guy's eyes widened and he didn't blink at the gray card in Ai Minno's hand, thinking to himself What if everyone closes their eyes Ai Minno secretly changes his own, I won't be fooled, don't want to find a chance to exchange the card on the table with you.
Eleno ignored Clio, she didn't know how to control the magic and simply closed her eyes, and then mobilized the magic power to import the magic card in her hand.
The incandescent light flashed, and Merlin felt a pain in his eyes even when he closed his eyelids.
At the same time, his ear was shaken by a scream from Cleo, and his eardrum hurt.
"Ahh