Time has gradually passed, the aircraft of the Zhandu aircraft production line of Rongcheng 123 Factory have been rolling off the assembly line, and the first Super 7 fighter jets to be delivered to Egypt have reached the IOC (initial combat capability) standard, and are gradually producing products that will be delivered to Myanmar and Bangladesh.

On the other side of the next door, on the No. 2 production line, even the old nose-intake J-7M fighter is still doing the last small batch production, and the reason why it continues to produce is mainly to maintain the production workforce, and on the other hand, it is also to ensure that a small number of new aircraft are put into service with the Air Force every year to replace the J-6 that has been in service every year.

But this situation will not last, the newly built No. 10 fighter production line next door is undergoing production and commissioning, if everything goes well, there will be another half a year to start production of the first batch of J-10A, which is the fastest model in the entire No. 10 project.

The first unit to accept the task of refitting the Jian-10A fighter was a fighter regiment stationed in southern Yunnan, and the corresponding pilots had already been in place, and they all received training in Rongcheng for half a year.

In the future, as long as the aircraft production test flight passes, these pilots will fly the fighter plane to take off directly from the test flight station of the 123 factory, without making any stops on the way, and go straight to the airport in southern Yunnan, so as to ensure the air defense safety in the southwestern border areas of the motherland at all times.

Myanmar, Bangladesh, and India will all be equipped with third-generation fighters one after another, and although there is little chance of war here, air defense still cannot be relaxed.

The self-use J-10B fighter has completed most of the flight tests, the Yanliang National Flight Test Center received the J10B05/06 two test planes that were transferred and delivered, and the Rongcheng side is modified on the basis of the J10B03 aircraft after obtaining the consent of the military.

The overly powerful active phased array was ordered by the military to be modified by 607 and launched a reduced frequency version, the main direction of which is to reduce the detection range and multi-target attack capability, but in exchange for higher reliability of radar equipment, and effectively reduce target unlocking.

It is even more indispensable to modify the identification system and avionics technology to ensure that the performance gap between the export model and the military's own J-10B fighter is widened, which is very necessary.

Sitting in his office, he could often hear the sound of fighter jet test flights passing over the airspace above the city, and although the wind noise caused by the wings cutting through the air, Wang Zhengguo could still distinguish the murmur of the hidden Qingcheng engine.

With the rapid development of the Chengdu Economic Circle, the 123 factory was still in the suburbs of the city when it was first established in the early years, but it was only about 30 years, urbanization continued to expand outward, and the original 123 factory was gradually surrounded in the city......

Shaking his head, there are some things he can stop, but some things really can't be stopped, since the country and the army are not worried, then he is still worried about a line, it's just a fool's errand.

September 12, 1993, Jiuquan Satellite Launch Base

As the launch password of the ground control center was timed, the rocket engine ignited and took off instantly, carrying the Pioneer 2 data transmission optical satellite to fly into space, and the separation of the booster stage - the separation of the two-stage rocket - the separation of the star and arrow was successful!

There were enthusiastic cheers from the aerospace tracking and control command center, which also means that the rocket carried the Pioneer satellite has been successfully put into orbit, and according to the established procedures, follow-up work will be carried out soon.

Three days later, good news came from the space department, the Jianbing-2 satellite has successfully carried out the scheduled mission, and the ground station has received the first batch of photo data, which marks another milestone leap in the space industry of the Republic.

Looking at the earth from an altitude of 700KM, this is definitely not simply "spectacular" can be described, according to the staff of the ground receiving station, what a "beautiful" word.

It is also the first time, the camera printed with the optical logo of Shu Hang appeared in space, and this is a symbol of strength, as a camera, lens developer, the less sensitive photos taken by the Jianbing 2 satellite have been copied over, after post-processing, the brochure of Shu Hang Optics, from now on there is another talking point.

......

Shuhang annual sales of civilian camera products have reached 5,000 units, including the traditional 120/135 film machine, of course, more Tianshu series digital cameras, according to the new planning of Shuhang camera product line positioning, Tianshu series belongs to the card machine, the subsequent development direction is gradually closer to miniaturization.

However, before the advent of the 135 full-frame camera, in order to reduce costs and occupy the market.

Shuhang Optics and Kaiyang Semiconductor have developed a 0.5 micron APS-C format optical sensor, which reduces the photosensitive area of the imaging element, which can effectively reduce the production cost and better control the yield rate.

Based on the APS-C residual frame sensor, the new DSLR camera can be controlled at about 50,000 yuan, although this is still not easy to accept for most domestic photography enthusiasts, but some areas with special needs are still gritted their teeth to purchase.

For example, in terms of live news, the advantages of digital cameras are vividly reflected, and the photo data obtained from taking pictures can be easily transmitted quickly through wireless communication devices, and the efficiency of traditional film cameras is eliminated.

In this way, the first generation of Taikang digital camera completed all the development work, and in order to distinguish it from the existing 120/135 format film camera, the new camera number is Taikang APS-C100, with a relatively acceptable product price, after the launch of the camera, although the mass consumer market acceptance of it is not high, but there is still sales.

Since it is a revolutionary new product, before the market has fully formed the inherent order, the pioneer has time to establish its own high-end style, so as to enhance the brand image, this routine is vividly reflected in the upper automotive industry.

Truss, an inexperienced newcomer in the automotive industry, why does the electric car developed by this company cost hundreds of thousands of dollars at every turn, which is far behind other traditional auto industry veterans.

In the final analysis, the cost of Truss to build a car is really high, and if you think about it, I'm afraid it's not likely

Then the question arises, why is Truss asking for such a high price?

The reason is very simple, people are through the high asking price to improve the product quality, stretch the brand value, to create a top luxury car brand, this is the means of a shrewd entrepreneur, after all, this is the world's unique lithium battery electric vehicle, can not be copied.

If it's really about performance, the BYD electric vehicle technology next door is not weak, and the models that adhere to the 542 strategy are even more explosive.

But why can't the product power go up, also in the field of passenger cars, BYD cars with low prices can only compete with ordinary grocery cars for the market, and even give people the impression of cheapness, and from then on, BYD and cheap labels will be put together.

Well, it's worth pondering.