In fact, as early as the night before yesterday, when Li Xun and Chen Lao Wu discussed chasing the master to move, they already knew from Chen Lao Wu that this was actually the most critical moment for chasing the master to move. Pen % fun % Pavilion www.biquge.info

Success or failure, in the ten percent chance, at this moment, accounts for eighty percent!

Since then, the process of actually rebuilding the Earthquake Bow has been complicated, but it only accounts for 20%.

At this time, if it is successful, chase the master and move!

If it doesn't work, the famous bow of the ages may also suffer heavy losses!

The worst result is that the invisible murderous aura that has gathered for thousands of years will completely dissipate!

The Heaven-Shaking Bow was thrown into the raging flames, and naturally it was going to be completely burned, and the murderous aura that had gathered for thousands of years had nothing to rely on, and of course it would dissipate.

If that's the case, even if the Skyquaker is rebuilt, is it still the Skyquake?

Seriously, if it weren't for the fact that the four families were facing an unprecedented strong enemy such as Bai Muntjac, it was almost the moment of life and death, and it would be difficult for Li Xun to even make the decision to let the chasing master move.

Therefore, Li Xun at this moment, if he really wants to say that he is not nervous, it is also self-deception.

His clenched hands trembled slightly unconsciously.

Even if he faced a powerful enemy, such as the previous dragon python, white muntjac, bay crocodile and other super terrifying enemies, Li Xun had never been so nervous.

Not to mention that Li Xun was secretly nervous at this time, although Chen Lao Wu's expression was solemn, his eyes also irrepressibly showed a nervous look, Chen Lao Wu dared to let the chasing master move, naturally he had a great chance of success.

But no matter what, there is also the possibility of failure.

If the transfer failed, he really couldn't explain to Li Xun.

At this time, he stared nervously at the blazing iron-striking furnace, and watched as the sky-shaking bow turned to ashes in the iron-striking furnace, leaving only the bowstring burned red in the fire.

The iron furnace has been completely burned, the temperature in the furnace is as high as thousands of degrees, although the sky-shaking bow originally seemed to be majestic, but the main body is still a wooden material, how can it withstand this high temperature?

Turning his head, Chen Lao Wu's gaze shifted to the components of the new Sky Shaking Bow on the shelf on the side.

There are a total of 20 components of the Skyquake Bow, of which nine are beryllium copper bows about three millimeters thick in the shape of a recurve bow, and the other nine are finely carved North American century-old ash wood, which are also carved into the shape of a recurve bow.

Beryllium copper alone is not enough, the bow body of pure metal, no matter what, is strong enough, elastic enough.

Ash wood alone is not enough, the elasticity is enough, and the strength is not enough.

Only in this way can beryllium copper and ash wood be compacted and superimposed layer by layer, so as to have various requirements such as strength, hardness and elasticity, and cast a new generation of almost perfect sky-shaking bow.

In addition, there is a large iron tire bow outer layer, as well as a new bowstring.

To rebuild the sky-shaking bow, it is necessary to compact and superimpose the eighteen layers of beryllium copper and ash wood, and then use the outer layer of the iron tire bow to wrap the eighteen layers of the bow.

And at this moment, Chen Lao Wu faintly heard that one of the layers of the bow suddenly emitted a melodious metal concussion sound.

"Buzz ......"

This is one of the nine layers of the new Skyquake Bow's nine-layer beryllium copper bow body.

Because it's metal, the sound of the concussion is particularly clear.

Chen Lao Wu's eyes lit up, he bowed towards the iron furnace, and said loudly: "Thank you!"

Then he stepped forward, grabbed the still vibrating bow, and threw it into the blazing iron-striking furnace.

After doing all this, Chen Lao Wu began to quickly take off his robe and underwear, revealing his strong upper body, and at the same time he turned back to Li Xun and shouted: "Li Xun, prepare to strike iron!"

In fact, there was no need for Chen Lao Wu to shout, Li Xun was already greatly relieved when he heard the melodious sound of metal vibration, and began to take off his upper body clothes.

When Li Xun came to the iron furnace, Chen Lao Wu had already tightly clamped the red-hot sky-shaking bow in the furnace with pliers, and several of his iron-striking apprentices were not involved in the rituals, and were nervously helping on the side.

Li Xun watched Chen Lao Wu cut out the red-hot bow and asked, "Can you start?"

"Yes, you can start, this time we don't need to build too much, Hongru's factory has completed the preliminary processing, we just complete the final quenching process, in the final quenching process, properly strengthen the bow body, inject the blood power of the Chen family and the Li family. ”

"I don't think it took a long time, and the temperature doesn't seem to be too high, this should be the quenching temperature of beryllium copper. Li Xun said again.

"Yes, beryllium copper contains beryllium, beryllium is a highly toxic metal, so we must be very careful in our operation, and must not exceed the melting point of beryllium copper itself, that is, 930 degrees, otherwise, beryllium may be precipitated.

The best quenching temperature of beryllium copper is 315 degrees to 600 degrees, which will affect the quenching effect, and even more seriously affect the hardness of the bow body, which cannot reach the perfect Rockwell 40HRC hardness.

Therefore, we have to be more careful to grasp this temperature than when we shoot arrows, and we must complete the final building between 315 degrees and 600 degrees, inject blood power, and quench at the same time, not a single step can be bad, and now there are a total of nine bows that we need to inject blood power, so this difficulty is far more difficult than the previous arrows. ”

Li Xun nodded: "I know, now these nine beryllium copper bow body components, have gathered the murderous aura of Chasing Ye, if we fail to build one of the components, although we can replace it with other reserve beryllium copper bow bodies, but Chasing Ye's murderous aura will be affected, and the new bow cannot be called perfect." ”

"That's it, okay, let's get started. ”

Li Xun nodded, Chen Lao Wu is an expert in this area, leave it to him, rest assured.

Chen Lao Wu said as he pouted the red-hot beryllium copper bow, obviously the temperature was enough.

Li Xun raised a sledgehammer on the side.

Since this forging is just injecting blood power and quenching, it does not need to forge the arrow body from beginning to end like building an arrow body, so Li Xun does not need to use the original exaggerated hammer, but just chooses a normal iron hammer.

"Dingding......

The two of them began to strike iron.

The children of the Chen family on the high platform were still knocking on the magic weapon and chanting loudly.

The sound comes and goes, and it's really unique.

Chen Lao Wu and Li Xun cooperated to inject the power of the blood into the bow, and when the temperature was still more than 315 degrees, Chen Lao Wu threw the bow into a rectangular sink that had been prepared on the side.

"Sneer......"

White gas rises, and the first quenching is completed.

After that, Chen Lao Wu continued to throw the quenched bow body into the furnace.

After quenching five times in a row, the bow body has obtained sufficient hardness, and then it enters another key process, that is, the beryllium copper bow body with high temperature and the ash wood bow body are perfectly compacted to form a layer of eighteen layers of bow body.

This is a very difficult thing to do.

Because, ordinary superimposition, even glue and the like, is simply useless.

The only possibility is to use the thermal expansion and contraction of the metal to tightly embed the ash bow body into the beryllium copper bow body.

When the temperature is high, it is embedded, and then through quenching, the temperature is reduced at the same time, and the principle of thermal expansion and cold contraction is used to make the two fit perfectly.

But that's easier said than done.

This is also the most complicated process in the process of creating a new Sky Shaking Bow. (To be continued.) )