Walking into this standard light steel structure single-storey workshop with a length of more than 50 meters, a height of more than 20 meters and a span of more than 40 meters, the neat and clean walkway, the various types of general machine tools and CNC machine tools reasonably placed on both sides of the walkway, the neatly placed finished products, semi-finished products and raw materials, and the operators who wear blue uniforms in their respective jobs, just at a glance, Yang Mingzhe can see that Sanyi Heavy Industry has grasped the work of 6S management quite well.

When passing by a pile of semi-finished stainless steel materials neatly arranged on the side of the walkway, Yang Mingzhe casually touched one and a half members, and there was no dust or stain on his fingers.

00Cr17Ni14Mo2, 316L, ultra-low carbon austenitic stainless steel.

Yang Mingzhe suddenly came up with the international grade of this stainless steel bar in his mind.

Just by touching it, the system gives the name of the material. Yang Mingzhe is even more confident about the next task.

The third workshop, the full name is the machining workshop of the manufacturing department of the crane division.

Looking at Yang Mingzhe, who followed Ouyang Xu from afar and calmly, Liang Chengyuan, who was standing next to an unmanned ordinary general-purpose lathe, subconsciously frowned.

"Your cousin can't be talking about this young man, right?"

Song Wenhe, who was standing next to Liang Chengyuan, also frowned and muttered in a low voice.

Judging from the fact that he had just reached out to touch the pile of semi-finished materials, it didn't look like this person was here to mess around. ”

Liang Chengyuan lowered his voice and said: "He dares to bet with my cousin for 100,000 yuan, and agrees that we will act as a notary. ”

"But how do I think he doesn't look like a person with an eighth-level worker's unique skills!" Song Wenhe shook his head and smiled bitterly.

"Anyway, being idle is idle, let's be a dead horse as a live horse doctor!"

Liang Chengyuan sighed, and walked over after speaking.

"Ouyang, is this the Master Yang you said on the phone?" Liang Chengyuan asked with a smile as he looked at Yang Mingzhe, who was getting closer and closer.

"Big Table...... Mr. Liang, this is Master Yang. Ouyang Xu sideways introduced Yang Mingzhe.

"Mr. Liang, hello. I'm Yang Mingzhe. ”

Yang Mingzhe was neither humble nor arrogant, and stretched out his right palm to shake hands with Liang Chengyuan.

"Young people, we also have eighth-level workers in Sanyi Heavy Industry. ”

Song Wenhe answered expressionlessly on the side: "I don't care whether you have the technical strength of an eighth-level worker, but I need to remind you that even if you are an eighth-level worker, the processed products may not be able to meet the accuracy standards required by the Germans." ”

"Who is this?" Yang Mingzhe asked with an indifferent look at Liang Chengyuan.

"Song Wenhe, deputy chief engineer of our group company, Song Chief Engineer. Liang Chengyuan introduced.

"Chief Engineer Song, do you think I will have nothing to do and spare 100,000 yuan to be the wrongdoer?"

Yang Mingzhe looked at Song Wenhe with eye level, and said slowly and reasonably: "Without this diamond diamond, I dare to take this porcelain job easily?"

"Hmph, I'll wait and see!" Song Wenhe snorted coldly and turned his head to look.

"Mr. Liang, if it's convenient, can you let me look at the drawings first?" Yang Mingzhe didn't pay much attention to the deputy chief engineer of Sanyi Heavy Industry in front of him, and turned his head to look at Liang Chengyuan.

Liang Chengyuan didn't say much, reached out and took the parts drawings from the young assistant standing behind him, and unfolded them directly on the cleanly wiped workbench next to the lathe.

Yang Mingzhe approached, leaned over and picked it up and looked at it carefully. Immediately, a three-dimensional structure part diagram came to mind, and the corresponding turning process.

Yang Mingzhe quietly took the processing technology marked in the drawings in his hand, compared it with the process flow given by the system, and found that there were changes in details.

At this time, Liang Chengyuan's assistant picked up the toolbox next to him, took out five sets of bearing parts blanks from it, and gently placed them on the workbench one by one.

After about three minutes, Yang Mingzhe put down the drawings, closed his eyes and pondered for a while.

Soon, Yang Mingzhe opened his eyes, picked up a rough processed part blank, and looked at it in front of his eyes.

"Theron ceramics, good stuff. Yang Mingzhe whispered to himself, "But there is a problem with this stress." ”

Seeing that Yang Mingzhe recognized the material of the parts in his hand after just two glances, Liang Chengyuan and Song Wenhe on the side couldn't help but glance at each other. Each could read a little surprise in the other's eyes.

Yang Mingzhe picked left and right among the other four groups of parts blanks, and finally picked out a group of two pieces.

Then I approached the horizontal ordinary lathe on the side, first tested the lathe rail, then tried the four-jaw chuck by hand, and then picked up a few turning tools on the tool rack next to the lathe and looked at it. Finally, I turned on the power switch of the lathe and listened carefully to the sound of the motor.

After making sure that everything was normal with this ordinary precision lathe, Yang Mingzhe picked two turning tools, looked up and looked around, and then calmly walked towards the location of the grinder.

Watching Yang Mingzhe skillfully sharpen his knife, Ouyang Xu walked to Liang Chengyuan's side and asked in a low voice, "Big cousin, do you see something?"

"He's an expert!" Liang Chengyuan nodded and replied in a low voice: "With his skill in sharpening knives, he is fully qualified as a senior technician. ”

Not long after, Yang Mingzhe sharpened the turning tool, returned to the lathe and began to put on the fixture, and began to test the tool without delay. After making sure that the hand-cranked cutter head was working correctly, Yang Mingzhe began to feed the blank clamped on the four-jaw chuck quickly and slowly.

The turning and broaching action of a simple machine looks like a smooth flow in Yang Mingzhe's hands.

About half an hour later, Yang Mingzhe completed the finishing of the two bearings, and Yang Mingzhe asked Liang Chengyuan to find someone to take a grinding and polishing grinder for manual mirror polishing.

Liang Chengyuan and Song Wenhe saw that Yang Mingzhe did not use a professional automatic polishing machine, but chose to polish by hand, and at this time they finally believed that the young man in front of them who did not look good might really have the skills of an eighth-level fitter.

OBVIOUSLY, LIANG CHENGYUAN AND SONG WENHE HAVE REALIZED THAT YANG MINGZHE MUST KNOW THAT THE EXISTING AUTOMATIC POLISHING MACHINE CANNOT MEET THE ULTRA-PRECISE ACCURACY REQUIREMENTS OF SURFACE ROUGHNESS LESS THAN 10NM AND TOLERANCE LESS THAN PLUS OR MINUS 25NM.

Could it be that human manual operation can really exceed the processing accuracy of precision automation equipment?!

Can the stability of human hands really be more stable than that of machines?!

Witnessing Yang Mingzhe's extremely focused demeanor during the hand-polishing process, as well as his extremely stable hands without any trembling, Liang Chengyuan, Song Wenhe, Ouyang Xu and others who were watching at the scene were all deeply shocked.

Of course, Liang Chengyuan, Song Wenhe, Ouyang Xu and others didn't know that Yang Mingzhe at this time was no longer Yang Mingzhe, but a "humanoid robot" controlled by the system and the [Universal Technician Glove]!

Yang Mingzhe has now put his body under the control of the system, and he himself is engrossed in digesting the various process details and techniques displayed by the system during the previous turning and finishing process.

It can be said that Yang Mingzhe, who originally only had ordinary lathe technology, after this on-site practical processing, can not reach the technical level of technician-level lathes, at least there is a senior technician level.