Naturally, Yang Mingzhe would not expect Dr. Zhao to believe his words.

Subconsciously, Yang Mingzhe secretly activated the [Pupil of Talent] and observed Dr. Zhao.

Zhao Xiping, male, 28 years old, Dong ethnic group, Chinese on earth

Occupation: Deputy Chief Physician of Surgery

Intelligence 120, Energy 95, Emotional Intelligence 115, Eloquence 105, Practical Operations 115, Executive 85, Liberal Arts 105, Science 115, Physical Education 85, Arts 75

Professional skills: good at general surgery of Western medicine, good at neurosurgery, good at orthopedics of traditional Chinese medicine

Comprehensive quality assessment: C+

The deputy chief physician of the Department of Surgery of Qingya Hospital has a comprehensive assessment that is one level higher than my 100.

System boss, how should this talent be adjusted for medical talents? Yang Mingzhe asked silently in his mind.

System: The host groped for itself!

Yang Mingzhe secretly despised the system, and consciously stopped asking questions, but turned his attention to the system mall.

[Mechanical Engineering Primary Vocational Skills Card] [Mechanical Engineering Intermediate Vocational Skills Card] [Information Engineering Primary Vocational Skills Card] [Information Engineering Intermediate Vocational Skills Card] [Electrical Engineering Primary Vocational Skills Card] [Electrical Engineering Intermediate Vocational Skills Card] [Basic Materials Application Research Skills Card] [Advanced Materials Application Research Skills Card] [Metallurgical Primary Vocational Skills Card] [Metallurgical Intermediate Vocational Skills Card] [Automotive Engineering Primary Vocational Skills Card] [Automotive Engineering Intermediate Vocational Skills Card]......

A wide variety of skill cards cover all categories of modern industry: heavy industry, light industry and chemical industry. Yang Mingzhe's eyes were extremely hot.

Yang Mingzhe clicked on the primary vocational skills card of mechanical engineering, and then showed the primary vocational skills card of six subcategories: numerical control technology, mechanical manufacturing and automation, computer-aided design and manufacturing, CNC equipment application and maintenance, testing technology and application, and mold design and manufacturing.

Then put the CNC technology primary vocational skills card, Yang Mingzhe was dumbfounded.

What the hell is this? QR code?

Could it be that this kind of skill card can be used by scanning the code?

The price of the system is 100 credit points to exchange for one piece, and one can be reused ten times.

Seeing that Yang Mingzhe was sitting on the hospital bed with his eyes straight and silent, Dr. Zhao stretched out his hand and shook it twice in front of Yang Mingzhe's eyes, "Teacher Yang, Teacher Yang." ”

Yang Mingzhe, who came back to his senses, asked in a daze, "Doctor Zhao, what's wrong?"

"Are you alright?" are you feeling uncomfortable?" Dr. Zhao asked with concern.

Yang Mingzhe shook his head and replied, "It's okay, it's okay, I was thinking about a question just now, and I was a little distracted, I'm sorry, Doctor Zhao." ”

"It's okay, don't disturb your rest, I'm leaving. If you feel unwell, ring the bell and call the nurse. Dr. Zhao said, pointing to a green button at the head of the bed.

"Okay, thank you Dr. Zhao, I won't send it. ”

Seeing Dr. Zhao leave, Yang Mingzhe slowly lay down on the hospital bed, pulled the quilt over his chest, closed his eyes, and looked like he was sleeping.

"System boss, how to use this skill card QR code?"

System: You use your mobile phone to create a WeChat group, and after redeeming it, the QR code will be displayed in the WeChat group, and then pull the students you want to train into the group, let them scan the QR code with their mobile phones, and after a week, these students will be able to master this skill.

Mingzhe Yang: Students scan this QR code, and they will be able to master the skills in a week? Are you sure?

System: As long as the QR code is scanned, the system can connect with the student's brain wave through electromagnetic waves, so that students can grasp the skill information contained in this QR code in a subtle way. The premise is that these students must be within 30 kilometers of your location, and the student's practical talent value must be at least 115 and the intelligence must not be less than 100.

I'm going to do it! Isn't this similar to a Buddhist empowerment!

System boss, do you want to be so awesome!

System: This is just the basic functionality of the system.

Figuring out the price and how to use the skill card, Yang Mingzhe was determined.

The first thing to do is to quickly find a way to set up the training studio, complete the second task, and get the god-level skill of [Talent Reset]. In this way, we can start to train the first ten students so that they can become talents.

According to the additional instructions of the system skill card, junior talents who have mastered the corresponding skills of the primary skill card can be proficient in using basic skills to complete the routine work of their profession independently, and under certain circumstances, they can use professional skills to complete more complex work and cooperate with others.

Such an ability fully meets the assessment standards of the National Vocational Qualification Level 4 (Intermediate Technician)!

According to Yang Mingzhe's understanding, the vast majority of students in the Department of Mechanical Engineering of Jiangnan Vocational College can only obtain the National Vocational Qualification Level 5 Certificate (junior technician) after three years of junior college. However, even so, there are very few of these graduates who really have the level of practical ability of the fifth level of national vocational qualification.

Now, Yang Mingzhe can use the magical abilities granted by the system to let them truly master vocational skills through skill cards, and at the same time cultivate their practical work ability, bringing them all into qualified intermediate technicians!

In these days, the intermediate vocational qualification certificate can be bought with money, but the vocational skills that are truly in line with the intermediate vocational qualification standards are not at all something that money can buy.

The Department of Mechanical Engineering of Jiangnan Industrial Vocational and Technical College majored in mechanical manufacturing and automation, mainly for design institutes, machinery manufacturing, light industry and automobiles, military industry and other industries, and cultivated professional and technical talents in machinery manufacturing and automation. Graduates of this program can work in a combination of mechanical engineering technology and computer application technology.

However, in Yang Mingzhe's view, the major offered by Jiangnan Vocational College is actually not much different from the CNC technology major, which is mainly to cultivate CNC technical talents. As for the computer-aided design and manufacturing of mechanical products, computer-aided product modeling, computer-aided process management, etc., it is basically a scene to make up a number.

In developed countries, CNC machine tools have been widely used. There is still a big gap between China's manufacturing industry and the international advanced industrial countries. The numerical control of machine tools is less than 2%. Moreover, China's existing CNC machine tools (most of which are imported products) have not been fully utilized. Although there are many reasons, the lack of CNC talents is undoubtedly one of the main reasons.

Because numerical control technology is the most typical and widely used mechatro-optical integration integrated technology, China urgently needs a large number of numerical control technical personnel at all levels from research and development to use and maintenance.

Large and medium-sized state-owned enterprises, especially military enterprises with good economic benefits, major national equipment manufacturing enterprises and military manufacturing enterprises are the main application objects of CNC technical talents in China.

With the rapid development of the private economy, in China's coastal economically developed areas, CNC talents are in short supply. Mainly concentrated in mold manufacturing enterprises and auto parts manufacturing enterprises.

An intermediate mold technician with CNC knowledge has an annual salary of 300,000 yuan, which exceeds many doctoral students!

There are two main sources of various CNC talents in the production line in China.

One is a graduate of a university, higher vocational and secondary vocational degree in mechanical manufacturing and automation, numerical control technology or mechatronics. These lifelong students are young, with varying degrees of English, computer applications, basic knowledge of mechanical and electrical skills, and a certain degree of motivation, and the ability to accept new things and knowledge quickly. But their biggest flaw is that they don't learn useful hands-on experience in school. At the same time, due to the narrow division of professional courses in school education, it is difficult to meet the needs of enterprises for compound talents integrating processing and maintenance.

Another source is to select personnel from the existing employees of the enterprise to participate in short-term and medium-term training of CNC technology at different levels, in order to meet the urgent need of enterprises for CNC talents. Although these personnel generally have the process background and rich practical experience required by the enterprise, most of them are graduates at all levels of traditional mechanical or electrical majors, and their knowledge is narrow, especially they do not know much about computer application technology and computer numerical control systems.

However, even among the CNC talents output from two sources, most of them only understand the basic operation of CNC machine tools, as for the compound talents who understand both operation and maintenance, software programming optimization, technological upgrading, etc., it is difficult to produce one out of a thousand. It's a rarity.

It can be said that the training of real CNC technology compound talents is definitely promising.

Thinking about the training direction of his training institution, Yang Mingzhe was relaxed and also had a feeling.

As the saying goes, there is a fixed number of drinks and pecks.

These students in front of me helped me complete the first system task, so I, Yang Mingzhe, will give you a practical skill that you can enjoy for a lifetime.