In the early morning of the next day, Li Wei went to the Talmud, and the port welcomed a Chinese cargo ship, carrying refinery equipment, as well as a large number of medical equipment, chemical equipment, etc...

The refinery workshop has been built, connected to the water and electricity network, the underground oil depot has been completed, the oil storage tank capacity is 20,000 cubic meters, and 20 thousand square meters of oil tank. Pen, fun, pavilion www. biquge。 info

The distillation equipment of the refinery is mainly imported domestic oil refining equipment, which is modified and upgraded, and cheap and affordable coal is used as the refinery fuel.

The principle of oil refining is very simple, that is, distillation, through equipment such as heating furnaces and fractionation columns, crude oil is vaporized, hydrocarbon compounds are evaporated at different temperatures, and then these substances are cooled into liquids to produce oil.

The process flow is: crude oil heat transfer - primary distillation - atmospheric distillation several steps; atmospheric distillation is the simplest, can produce gasoline diesel, aviation fuel, lubricating oil and so on...

Moreover, it can also produce petroleum gas, which can be used to tank liquefied petroleum gas! However, the output is relatively low, and the natural by-product gas is 3%, which can be specially refined.

But the cost is too high, obviously not cost-effective!

The system's enhanced refinery functions are perfect for the production of gasoline, diesel, jet fuel, as well as industrial lubricants, LPG, and asphalt.

Under normal circumstances, the monthly output of fuel oil is 3,000 tons, petroleum liquefied gas is 120 tons, and the residual asphalt, industrial and automotive lubricants are small, and the refining efficiency is very high.

After all, it is a small factory, the output will not be too large, covering an area of dozens of acres, with a monthly output of 3000t is good!

Somalia is too poor, the market is small, although the oil profit is very high, but the sales volume is quite limited, and the demand for the whole of southern Somalia is only 25,000 tons/year.

The main demand for diesel aviation fuel for fishing boats, cargo ships, airplanes, and trucks is relatively small, and the total number of private cars is less than 3,000, which is far worse than the capital!

In addition to selling to make money, it is mainly used for the town's internal needs, liquefied gas, cars, trucks, and aircraft fuel needs, as well as port fuel supplies.

Machine shops also need a lot of lubricating oil.

The oil refinery is put into operation, and the attached chemical plant must also be prepared to start construction and develop petroleum by-products, such as the production of petroleum asphalt, paraffin, chemical fiber, plastics...

In the future, the production of carbon fiber will also be here, and the small-scale trial production of super carbon fiber will be made, and Luo Feng, Zhang Xiaoming, and Li Jiaxing will make breakthroughs in their research, and success is close at hand!

The equipment purchased from this import includes two full sets of crude oil distillation and purification, separation, and post-processing equipment, as well as transportation pipelines, safety equipment, pressure vessels, etc.

In addition, 20 tanker trucks, metering stations, reactors, boilers, distillers, first-line production and manufacturing equipment for chemical plants, and a large number of pharmaceutical processing equipment.

At the beginning of the refinery + chemical plant, at least 200 employees will be needed to do the production logistics after training. There is a team of engineers, Luo Feng, and other researchers, who are responsible for management.

Refineries can be retrofitted with electric stills to save costs, and although the price of coal is not as high as US$110/T, the cost of electric distillers is lower and easier to maintain.

The reactors, boilers, and stills in the chemical plant also need a lot of electricity! At the rate of construction, the high-voltage line from Bitley to the Talmud can be built in two months.

The project of the port has come to an end, the 800-meter wharf has been poured, and the extension of the wharf is almost the same, leaving the wharf fishery warehouse, container yard, and surrounding highway transportation network are not finished, and many people have been demolished.

Fishery freezers, fishery processing plants, and seafood wholesale markets are speeding up construction, and the Gallasley Construction Company employs hundreds of workers who work overtime every day to meet the deadline.

The development of the local economy depends on these fishing and ocean shipping projects, and the villagers can't wait, and the harvest of this fishing boat going to sea is simply crazy for them.

Each fishing boat earns tens of thousands of dollars, and it is not even necessary to think about going to sea alone! There must be a plan, and the safety of the large fishing boats is more guaranteed.

As long as the seafood factory, seafood freezer, and seafood wholesale market are completed and the sales are stable, there will definitely be a wave of fishing, and they will all pool their money to buy fishing boats.

Li Wei took out loans to small fishing boat owners and professional fishermen, updated fishing equipment, bought 20-meter fishing boats, or even 30-meter large fishing boats, and imported trawls.

Equipped with sonar fish finders, GPS satellite phones, and diesel high-speed engines, Kismayo has a small shipyard that can assemble boats, and Li Wei provides the main components.

Engines, transmissions, propellers, spindles, rust-proof aluminum alloy shells, electric winches, mechanical transmissions, the production cost is very cheap, and the sales price is hundreds of thousands of dollars.

If you don't take out a loan, no one can afford it!

However, Li Wei issued a loan of US$10 million to increase the number of fishing vessels by about 20 and expand the scale of fishing, and many local fishermen raised funds to buy fishing boats.

The fishing company ordered four 3,000-ton distant-water fishing vessels, all of which were cheap goods produced in China and modified by themselves.

After signing for a large number of machinery and equipment for oil refineries, chemical plants, and pharmaceutical factories, Li Wei returned to Bitley, and Zhao He had already come to the town, waiting for him to discuss important matters.

The higher-ups had clear requirements and simple tasks, and ordered Zhao He to continue procurement, strengthen cooperation between the two sides, and strive to carry out more technical cooperation and intelligence cooperation.

China's Ministry of Industry and General Armament Department were stunned after receiving the first batch of hydroelectric turbines, submarine spindles, and large submarine propellers ordered!

After calculation, it should be between 1-10nm, the specific is not very clear, the process has errors, there is a possibility of deliberately blurring the accuracy, anyway, it is very against the sky!

Even the average value of 5nm is four times higher than the current highest technological level in the world! This will require at least ten years of research to close the gap.

As for the 1nm level, they can't believe that it has exceeded the limit of mechanical processing, unless they have black technology, but Li Wei has black technology, and 1nm is not a problem!

China's processing limit is 50-70nm, and it does not include complex processes, but only plane processing, such as cutting straight lines, arcs, cubes, etc...

A 20M submarine spindle is made of homogeneous special alloy steel, and the machining accuracy is 5nm, so the noise generated by its rotation can be less than 80 decibels!

Sonar systems are very difficult to detect!

The natural noise of the sea water is similar, perfectly covering the noise of the submarine propeller, and it is completely undetectable by sonar at a distance of more than 20KM, and the nuclear submarine will be very safe.

The General Armament Department was very frightened, and the Ministry of Industry was also confused, the accuracy exceeded that of Europe and the United States, and it was several times more than that, and they couldn't believe it even if they were killed, but they had to believe it.

The official urgently needs "high-precision machine tools", hoping to purchase this kind of machine tools, the price is irrelevant, billions of dollars can be accepted, I am afraid that Li Wei will not sell it.