The safety door of the CNC machine tool opened, and someone skillfully removed the alloy milling cutter with a tool and handed it to Yu Wei. Pen, fun, and www.biquge.info

At this time, Yu Wei's mood is not calm, success or failure in one move, if successful, the diamond knife group will usher in a new tomorrow, if it fails, the diamond knife group will go into decline, the glory is no more.

Holding this alloy milling cutter, Yu Wei Zai looked carefully, everyone's eyes were all focused on this milling cutter, the insider looked at the doorway, the layman looked at the excitement, Yu Wei was obviously an insider, after looking at it, his heart was even more uncalm.

As soon as he stretched out his hand, seeing this, someone next to him immediately understood, and brought over a magnifying glass, Yu Wei used this magnifying glass, and looked at it carefully for at least a minute, which can be described as very careful, and after looking at it for so long, he stopped.

There was a vice president next to him, and he immediately asked nervously, "Boss, how is it?"

Yu Wei didn't comment, didn't say good, didn't say bad, but gave the alloy milling cutter to the technical vice president next to him, "Conduct further testing immediately, I want to see the report." ”

The technical vice president nodded vigorously, and immediately arranged several technical backbones to test on the side, using very advanced instruments and equipment.

As one of the leading enterprises with annual sales of 1 or 20 billion yuan and domestic knives, Diamond Tool Group has very advanced tool testing instruments and very mature detection methods.

These backbone technicians immediately installed this alloy milling cutter on the instrument, which is an imported tool detector, the blade of the alloy milling cutter is magnified a hundred times, everything can be seen clearly, such as the wear of the blade, the bonding situation, etc.

"It's, it can't be!"

Everyone looked at the display screen of this tool detector almost with bated breath, and many people exclaimed when they saw the cutting edge of the alloy milling cutter on the screen.

The blade is magnified a hundred times, everything can be seen clearly, everyone can see, the blade is as new, and it is impossible to see that the blade has undergone a series of parts processing and cut a lot of metal.

Someone said loudly: "Guo Gong, it can't be that you have misseen the blade." ”

General alloy milling cutter, it generally has many small blades, each small blade has multiple blades, some people are worried that it is a mistake, and the blades that have not been used are being tested.

Guo Gong said: "It's not wrong, we have a number, besides, if you look carefully, this blade also has a certain slight wear, which is very, very slight, if you don't look carefully, it's hard to see." ”

No matter what kind of tool, used to process parts are have a service life, will with the processing time becomes longer, gradually appear wear, bonding, blackening and a series of situations, the longer the processing time, generally these situations are more serious, when serious enough to affect the processing quality of the parts, the tool will be scrapped.

Undoubtedly, the longer the service life of the tool, the better its quality, which is an important quality parameter.

"Oh my God, it's unbelievable!"

Seeing such a situation, many people exclaimed, everyone has been engaged in knives for a lifetime, and it is estimated that it is the first time to encounter such a situation.

Yu Wei's face was also flushed, even as the president of the Diamond Knife Group, and in front of so many subordinates, Yu Wei really couldn't control himself from being excited, the quality of this cemented carbide steel of Sanlian Special Steel was so good, it was much beyond Wei's imagination.

As a senior tool manufacturer, Yu Wei knows that with such an excellent cemented carbide steel, the time has come for his diamond tool group to show its talents, not only to regain the share of the medium and high-end tool market that was lost before, but also to expand abroad in the future.

The test and analysis report soon came out, and the alloy milling cutter made of cemented carbide steel of Sanlian Special Steel Group has a life of two to three times longer than that of similar imported milling cutters.

And not only the life is greatly extended, the processing quality of the parts is also very perfect, the specimen used to process on the CNC machine tool, the surface quality of the processed is very good, and the size is fully qualified.

It can be seen that this alloy milling cutter just now is much better than the same type of imported alloy milling cutter, and if it is introduced to the market in large quantities, it will definitely be a hot item.

From Sanlian Special Steel Group, we have booked a billion worth of cemented carbide steel, which can not only make alloy milling cutters, but also produce various types of tools in large quantities, such as turning tools, drills, boring cutters and so on.

Yu Wei clenched his fists tightly and said loudly in his heart: "I want to do a big job and let the world know that the best knives in the world are made by us in Huaxia!"

Such bold words were shouted out in Wei's heart.

At the same time, Yu Wei is full of gratitude to Sanlian Special Steel Group and Wang Xudong, it is precisely because of such excellent cemented carbide steel that he was saved from fire and water, and it is not an exaggeration to say that Wang Xudong is the great benefactor of the entire diamond knife group.

"Well, if you find a time, you have to come to the door in person to thank people. Yu Wei said in his heart.

At this time, Wang Xudong was thousands of miles away in Australia, and fought a beautiful turnaround, which made the international iron ore procurement and negotiation conference jointly organized by Bihe Mining Group and Lito Mining Group end dismally, so that these mining groups had no income.

………

Australia, headquarters of Bihe Mining Group.

The conference was anticlimactic, making such a big joke in the world's mining industry, Duolun and the others were completely disgraced and became the laughing stock of their peers in the mining industry.

Duolun also returned to his Bihe Mining Group headquarters, and after he came back, he almost closed his door, because he knew that if he showed up again at this time, he would lose face, and it was estimated that some peers would look at him differently.

Hiding in his office, however, the concern for Xudong Mining Group has not relaxed, and someone has been sent to secretly investigate the movements of Xudong Mining Group.

Knowing that the person in charge of these Huaxia steel enterprises went to visit the No. 2 mine and No. 1 mine in Australia under the leadership of Wang Xudong, he was so angry that he knew that he had worked hard and made a wedding dress for Xudong Mining Group, and people would not order iron ore from Bihe Mining Group, but would definitely order iron ore from Xudong Mining Group.

At the same time, Duolun was unwilling, and thought fiercely, so many orders, it is best to support Xudong Mining Group, hum!

As the president of Bihe Mining Group, Duolun naturally knows the amount of iron ore that Huaxia needs to import every year, and also knows the current scale and production capacity of Xudong Mining Group.

If you really can't eat so many iron ore orders, then there is a good show. Duolun thought so fiercely in his heart.

Outside the office door, there was a knock on the door, and it was Duolun's assistant who pushed the door in, holding a sample of iron ore and a test report that had just come out.

If there are people from Xudong Mining Group here, they will definitely be very familiar with this iron ore sample when they see it, how can this red iron ore be so familiar.

This iron ore sample is the iron ore of Xudong Mining Group, and it is not difficult to get such an iron ore sample.

Duolun naturally also heard about the quality of the iron ore of Xudong Mining Group, and he didn't believe it, so he asked his assistant to get some samples, and then test them well.

"Mr. President, this is an iron ore sample from Xudong Mining Group, and this is an iron ore test report. With that, he placed the things on Doron's desk and stood aside.

Duolun nodded, took out a magnifying glass, the first thing he looked at was these iron ore samples, after looking at it, his face changed slightly, obviously, he saw that these iron ores were extraordinary, that is, they were very high-quality.

After looking at these iron ore samples, Duolun picked up the test report and looked at it again, only to look at it, his face changed again, and he asked loudly: "How is this possible, are you mistaken, take it back and re-test, I want real data." ”

The assistant said helplessly: "Mr. President, at the beginning, we also thought that the data was wrong, so we tested it several times, indeed, although the grade of these iron ore is not very high, but it has almost no harmful elements, and the beneficial elements are very rich, in addition, we tested a total of more than a dozen samples, and the results obtained are almost very similar, which shows that the iron ore of Xudong Mining is not much different, and its quality is very stable." ”

Iron ore grade is only one aspect of quality, in addition to many indicators, the worst thing is that in addition to the high grade of iron ore of Xudong Mining, other indicators are also very perfect.

There is nothing wrong with the data!

Duolun's face gradually became difficult to look at, and with great force, he tore the test report to shreds and threw it on the ground, which showed the anger in Duolun's heart at this time.

At this time, Duolun's sense of crisis is unprecedentedly strong, knowing that Xudong Mining Group is developing so fast, and there is such a high-quality iron ore, Duolun knows that if no means are taken, Xudong Mining Group will definitely surpass any mining company in the world, including Bihe Mining Group, so as to sit in the position of the world's mining company boss.

Taking advantage of the fact that Xudong Mining Group has not yet fully developed, all means must be taken to strangle it in the cradle. This is the thought in Duolun's mind at this moment.

It seems that the lesson is not enough, it is not tragic enough, and it is not learned from the lesson, thinking about how to take means and measures to deal with Xudong Mining Group.

I don't know what kind of means this Duolun will take, and I don't know who will win in the end, at this time, Wang Xudong is in Pace.

This is a 5-star hotel.

Wang Xudong has been waiting for the statistical results in his presidential suite, and this afternoon, Chang Jianliang arranged for someone to count the amount of iron ore that everyone needs next year.

Not long after, Chang Jianliang looked happy, knocked on the door with a list in his hand, and came in.

……..

The third is sent!

(That's all for today's update, thank you!)