Gu Fei changed his clothes, pretended to go around the third and fourth floors, and then Shi Shiran returned to his own territory on the first floor.

The golden nest and the silver nest are still not as good as their own kennels.

Gu Fei held the bitter herbal tea and drank it.

The vice president on the third and fourth floors said a good thing when he invited someone, but as soon as they heard Gu Fei say that they didn't find anything that could help them for the time being, they immediately went to their own affairs.

Then turn around and go, with hurried steps, without the slightest nostalgia.

As soon as he thought of that scene, Gu Fei shook his head in amazement. Although he had changed into dry clothes, he felt that his body was colder than in wet clothes.

However, Gu Fei didn't complain, and after feeling it for a while, he immediately threw it away. He found Chen Xiaotian and discussed wholeheartedly the matter of improving the quality of the several car departments.

The two of them didn't know how long they had been arguing, and Zhang Li came out of nowhere behind Gu Fei again.

She tugged at Gu Fei's clothes, and said with a glint in her eyes: "Boom, Gu Fei, your clothes are drying so fast." This kind of damn weather, I thought you would have to get wet for at least a morning. ”

Gu Fei smiled noncommittally, he subconsciously looked at the folder in Zhang Li's hand, and asked jokingly: "Yo, isn't this Miss Zhang who has nothing to do but go to the Three Treasures Palace." Are there any new orders again? Is there a big number this time?"

Zhang Li chuckled and couldn't help but glance at Gu Fei. She knew what Gu Fei meant.

For a technician like Gu Fei, the larger the order, the easier it will be for him. For example, some orders have hundreds of thousands of millions, and after the machine is adjusted, it needs to be worked continuously for several months, so Gu Fei can usually spend a few months leisurely.

On the contrary, if it is all small orders, especially the design proofing orders sent by the design department, the number is often a dozen or dozens, and even the parameters have to be modified from time to time, even if Gu Fei lies on the machine all day, it is not enough time.

Zhang Li shook her head and smiled mysteriously: "This time it's not an order, but a burden for you." ”

Gu Fei frowned, and asked suspiciously, "Oh, what kind of burden? I really didn't understand this." ”

Zhang Li didn't speak, but just led Gu Fei to the large open space opposite the number of cars.

She pointed to her feet and said, "You need to find someone to clean it out quickly." The company has ordered five CNC machining centers, and it will not take long to ship them back. Later they will be placed here and then combined with the number of cars to form the CNC department. ”

Gu Fei's heart jumped, and his eyes lit up and asked, "Processing center?"

"Yes, it's a machining center. I heard that only five units were bought in the first batch, and the number will be expanded after a while, and those general milling cars should be eliminated directly in the future. Zhang Li pointed to the ordinary machine tool that was idle not far away.

"Let's get it, they're ashes anyway. Gu Fei didn't mean to cook rabbits and dead dogs at all, he smiled and asked curiously: "Why did the company suddenly think of introducing a processing center?"

Zhang Li glanced at Gu Fei again and said, "Knowingly, do you still need me to say this? It's not that you have too little role in counting cars." ”

Gu Fei was stunned, and then nodded, this was very easy for him to understand.

There are only two axes in the number of cars, if it is mathematically expressed that it is a plane, and the machining center has at least three axes, then it becomes three-dimensional, and the role is mostly large.

For example, Gu Fei wanted to make a fixture before, but he couldn't help with counting cars, he wanted to make a mold, but he couldn't help by counting cars, and even the design department designed a new product, because there was no machining center, he had to take the risk to take it outside for proofing.

As a result, I finally came back, and I wanted to change the size, but I still couldn't help with the number of cars, which had to be annoying.

Gu Fei looked at Zhang Li and continued to ask: "Since the general car and general milling are going to be eliminated, won't we be eliminated even if we count the cars?"

"I haven't heard of it. Zhang Li shook her head and said: "It shouldn't be, a lot of work in our company is shafts, sets or something, it is said that these parts are more cost-effective to manufacture with several cars." Upstairs I'm worried that you won't be able to do your job. ”

Zhang Li hesitated for a moment, and asked slowly: "Gu Fei, do you know the processing center? If you don't understand, I have to ask the personnel department to recruit people as soon as possible." ”

Speaking of this, Zhang Li wanted to speak and stopped, and silently shut up after half a sound.

In the entire manufacturing workshop on the first floor, there are five departments: several cars, blanking, stamping, pujia and packaging. Among the five supervisors, Zhang Li likes to cooperate with Gu Fei the most.

First, the two are about the same age, and they can talk a lot together.

Second, Gu Fei has a good temper and rarely gives her a look. Don't look at Zhang Li being busy on behalf of Wu Gong all day long, but she is just a clerk or secretary in the end, and the directors of several other departments don't know how much cheekiness she has thrown her, so she can only grit her teeth silently and endure it.

The third is the most important point, that is, Gu Fei is diligent, hardworking and motivated.

Zhang Li has seen several other supervisors, and when they have nothing to do, they play with their mobile phones or computers on their desks as openly as Wu Gong. Even if there is something to do, it is just to find someone to replace it.

And Gu Fei is different. After he finished his job, he was silently looking at one thick book after another, which was used to enrich his various knowledge and insights.

Based on this, Zhang Li felt that Gu Fei would get ahead sooner or later. Sure enough, it didn't take long for Gu Fei to become famous a few floors above.

It's just that what Zhang Li sees and hears does not represent what the company sees and hears. In the future, the number of cars and machining centers will be combined into a CNC department, and there will undoubtedly only be one CNC supervisor.

If Gu Fei doesn't know how to process the center, he will definitely have to recruit people again. At that time, with Gu Fei's age, it is estimated that it is unlikely to be a supervisor.

When Zhang Li thought of this, she couldn't help but feel sorry for Gu Fei.

Gu Fei smiled and said, "Isn't it just the processing center, it's not difficult for me." You can rest assured. ”

"Really?" Zhang Li's eyes lit up.

Gu Fei pointed to the counting cars next to him, and explained with a smile: "Before I joined this company, I didn't know anything about these counting cars, but now I can't use them like crazy? ”

Zhang Li snapped her fingers happily, and the two chatted a few more words before she left happily.

Gu Fei said it easily, so what is a machining center?

There are many types of machining centers, but when it comes to itself, it is a CNC milling machine.

It's just that only one knife can be installed at a time, which is very troublesome to use. Because there are almost no products or parts that can be made with just a knife.

Therefore, the machine tool company will add an extra tool magazine to it, and install all the tools required for processing at one time, and it will become a machining center.

The ordinary machining center is enlarged, that is, the gantry. On the other hand, the machining center is reduced, and it becomes a fine carving, and then it is a high-gloss machine.

Add a B-axis to the workbench and it becomes a 3+1-axis or four-axis simultaneous machining center. As for the five-axis, it has to redesign the machine, and it is not a matter of adding two axes like the four-axis.