If you are interested in cooperating with each other, it will be simple, and you can talk about the contract slowly.

The three of them chatted a few words and started the machine.

Soon, Gu Fei was a little speechless.

The three machining centers of this Hongsheng hardware factory actually carry three different CNC systems. And as soon as I looked at the font on the system, I immediately understood that these machines were almost or even scrapped.

Luo Xiuqiao was flipping through the drawings brought by Gu Fei. He turned his head to look, and happened to see Gu Fei not far away, looking at the CNC system on the machine tool with a thoughtful face, and suddenly felt a little embarrassed.

"Vice President Gu, those machines ......"

Gu Fei waved his hand towards Luo Xiuqiao from afar and said with a smile: "Haha...... This is your place, Director Luo, just call me Xiao Gu. Stop calling the vice president and vice president. ”

Gu Fei pointed to Lin Chunhui, who was looking around curiously, and said jokingly, "Didn't you see that Amon already had goosebumps?"

Luo Xiuqiao was stunned for a moment, he was also awkward, and nodded after thinking about it.

"That's fine. I'm blind for a while, so I shout at you Xiao Gu and Xiao Lin. Don't call me Director Luo. What kind of factory director is I, the bald commander, just call me Lao Luo. ”

Gu Fei and the two responded.

Luo Xiuqiao continued what he was about to say just now.

"Xiao Gu, I'll tell you frankly. Of the three machining centers in front of me, only the No. 1 machine in front of me is still good. And the No. 2 and No. 3 machines next to you, the tool magazine is broken. In addition, the X-axis clearance of the No. 3 machine is so large that it is almost useless. ”

Lin Chunhui leaned over and asked curiously, "Old Gu, where is the knife storehouse?"

Gu Feizheng frowned, but after listening to Lin Chunhui's words, he still raised his hand and pointed to the turntable above the spindle and said, "That's it!"

He saw that Lin Chunhui was willing to understand, so he said in detail: "Generally speaking, there are three ways of tool magazine in the machining center.

The first one is like the No. 2 machine in front of you. It's called a turntable knife magazine, and it looks like the old Jiang Qingtian's 'white sun', and the sharp tips around the 'white sun' are knives loaded on. This tool magazine hangs directly above the spindle and is relatively easy to change. As long as the spindle is raised, the tool magazine is rotated to the corresponding tool number, and the tool can be replaced.

The tool magazine of machine 3 is the second type. It looks like an ancient murderous weapon, a drop of blood. This kind of knife magazine is called a bucket hat type knife magazine. It is not mounted on the spindle, but on the side. When changing tools, a manipulator generally replaces the spindle with two tools on the tool magazine.

The first two types of tool magazine can be loaded with a few tools, and the rotary tool magazine can generally only hold 16 or 24 tools. There can be more hats, but there are about 30 of them.

The third type of tool magazine should be called the knife chain. There is no one, but it can hold up to a few hundred knives, which looks like the tracks of a tank, which is very spectacular. ”

Lin Chunhui couldn't help but be fascinated when he heard this, and muttered: "The third kind of knife magazine has hundreds of knives, so it should be able to process everything." ”

Gu Fei smiled and replied noncommittally, "Maybe." ”

After speaking, he walked to the No. 2 machine, looked up at the tool magazine number and the tool number of the CNC panel, and quickly understood why Luo Xiuqiao said that the tool magazine of the No. 2 machine was bad.

Gu Fei pressed the panel a few times, raised his voice and shouted: "Lao Luo, the knife magazine of this No. 2 machine is not broken, but it is stuck." Didn't you find someone to fix it?"

Luo Xiuqiao made a bitter face and said, "No." The knife hangar is not stuck, but broken. I don't have much work to do here, and I don't have the money to fix it, so I have to leave it there all the time. ”

Gu Fei shook his head and said, "What's bad, you won't try to figure it out yourself?"

Luo Xiuqiao opened his mouth wide, he stared at Gu Fei for a long time, and hurriedly walked over and asked, "Xiao Gu, don't you tell me that you can repair machine tools?"

Gu Fei looked at him silently for a while, and said: "When there is a problem with this machine, is it that the operator suddenly presses the emergency stop while driving the machine, or the machine is working, and the factory suddenly loses power, causing the tool magazine to be unable to move?"

Luo Xiuqiao was stunned, and suddenly looked at Gu Fei with a surprised expression.

He straightened his eyes and muttered, "How do you know? It was working when it malfunctioned, and suddenly the power went out. When the machine is turned on again, the tool magazine is stuck on it, and it can't be moved no matter what. I suspect it's the circuit inside that is short-circuited. ”

Gu Fei sighed, he knocked on the display screen of the machine, and said, "It's nothing." Won't you look at what the system displays? The tool library is still responsive, but the data is out of order. ”

After finishing speaking, Gu Fei said: "Look at it! This turntable-style knife magazine is a very simple thing, just get it casually." ”

After speaking, Gu Fei pressed the emergency stop, he put on his gloves and changed into his work shoes. Under the surprised eyes of the two people next to him, he climbed into the machine tool and broke off the knives on the entire tool magazine one by one.

Lin Chunhui wiped his sweat and shouted, "Old Gu, is the knife really broken off like corn?"

Gu Fei in the machine tool laughed and said, "When working normally, of course it is not like this. However, now the tool magazine has been stuck, and the tool cannot be disassembled and assembled normally. In order to avoid accidents, it can only be dismantled like this for the time being. ”

By the time Gu Fei finished speaking, the few knives had already been dismantled by him.

He jumped off the machine and walked to the back of the machine and pressed a few buttons before walking to the control panel. Gu Fei greeted Luo Xiuqiao, who was a little confused, and said, "You are optimistic about the code I entered in the PLC." ”

"Turn on the PLC switch, turn off the upper limit of the Z-axis, cancel the tool code, adjust to the original mode, and raise the spindle to the upper limit, M96 ......"

Gu Fei said as he was dazzled and quickly operated.

After a long while, he suddenly turned off the power with a "snap", and then restarted the system directly. Looking at Luo Xiuqiao, Gu Fei asked slowly, "It should be all right." Do you understand?"

Understand a yarn.

Luo Xiuqiao looked at Gu Fei with tears streaming down his face, an old man with a red face and red ears, and he didn't dare to make a sound.

During these days, Lin Chunhui was hit by Gu Fei every day, and he was so used to it that he couldn't get used to it anymore, so he didn't want to make a face, and opened his mouth directly.

"I don't understand it at all. That full screen of all other codes is 010001000 this binary number. Ghosts can understand. ”

Bosom friend!

This is a bosom friend!

Luo Xiuqiao looked at Lin Chunhui, who had relieved him with gratitude, and hurriedly grabbed his hand and shook it vigorously. The two of them cherish each other, you look at me and I look at you, and they both have a feeling of hating each other.

Gu Fei was a little speechless.

Now that the system is loaded, he shakes his head and pulls out the emergency stop and enters the tool change code.

Kaka Ka ......

In Luo Xiuqiao's stunned, the knife magazine on the machine seemed to come to life, turned around step by step, and finally obediently stopped at the knife position of No. 1.

Gu Fei clapped his hands and said with a smile: "I didn't lie to you." Now the magazine is ready to use. I'm going to turn on the safety button at the back now, so I don't have any accidents. ”

It didn't take long for Gu Fei to walk to the No. 3 machine, enter the code on the panel, and try to drive the tool magazine step by step.

Luo Xiuqiao, who had just woken up from a dream, hurriedly walked over, he looked at Gu Fei with a respectful face, and couldn't help but ask, "Little ...... Gu Fei, will you also repair this kind of hat-style knife storehouse?"

Gu Fei didn't answer directly, just looked at the entire machine, and said directly: "When there is a problem with this knife magazine, there will either be a power outage or insufficient air pressure. I'm not wrong, am I?"

Luo Xiuqiao slowly opened his mouth again. He patted his thigh, opened his eyebrows and smiled: "If it's really an expert, you will know if there is one."

You're right. There was a problem with the machine, and the air compressor in the factory was shut down, causing the air pressure to be insufficient. At that time, the manipulator was grasping two knives, but it stopped directly. ”