"It's amazing. Gu Fei pounced excitedly, smiling around the machine in front of him.

It took him a long moment before he stood still, trembling and pressing the green power start button above the machine.

Airplanes......

The dull sound of electricity sounded, and the large and small lights on the control panel of the machine flickered rapidly, and at first glance, it was a full sci-fi blockbuster.

At the same time, the small display screen began to display the code line by line, and slowly turned into four big characters: Huadu CNC.

Gu Fei clenched his fists excitedly and asked in a raised voice, "No. 1, is this machine really exactly the same as the one outside?"

The result was inconclusive, and the cold system did not directly reply to Gu Fei's stupid question.

Gu Fei was lying on the machine and was about to do something. He suddenly remembered the time, and suddenly felt that this soak of urine might not be too long, and hurriedly withdrew from the laboratory.

As a result, he hurried back to the counting car department, only to find that the time on the wall had only passed five minutes.

Gu Fei couldn't help but be dumbfounded, and hurriedly summoned No. 1.

"One, One, what's going on, doesn't it consume real time in the laboratory?"

"Consumed, just extended in a 10:1 ratio. In other words, ten minutes have passed in the laboratory, and only one minute has passed in reality. ”

Gu Fei was dumbfounded: "This is okay?"

"Of course. No. 1 explained in a rare good-natured manner: "Do you know why so many people want to be reborn? And I can't make you stuff it back in and start over, so I have to prolong the rest of the time. Giving you more time to learn, so you can make a splash. ”

Gu Fei nodded in understanding.

Someone in front suddenly shouted: "Gu Fei, you stay there and make a hair, why don't you hurry over and help?"

Gu Fei ignored him and went straight to the office of the production department.

The production office on the first floor is not large, but it is air-conditioned. In this hot summer, it is undoubtedly a good place compared to the number of cars with only a few ceiling fans.

Gu Fei knocked on the door and walked in after getting a response.

As soon as he entered the office, a refreshing cold air rushed towards him, and he couldn't help but breathe a long sigh of relief.

Wu Gong, the vice president of production, saw that it was not his boss, so he hurriedly flicked away the landlord on the computer, and asked angrily while looking at the cards: "What's the matter with you?"

Gu Fei thought for a while and said directly: "Mr. Wu, what is the most urgent thing about the company's order now? ”

Wu Gong didn't say anything, and Zhang Li, the clerk on the booth next to him, asked curiously: "I remember that you are a handyman, what do you want to make drawings?"

Gu Fei sorted out his thoughts and said with a smile: "I studied mechanical manufacturing and automation in college, and I have been exposed to CNC lathes. Now that the number of cars is almost completely stopped, why don't you let me try. After all, it is a little bit to be able to do some work, otherwise the pile of employees who count the cars can only be in a daze every day. Otherwise, in a few days, not to mention counting the car department, the entire first floor will have to be stopped. ”

Gu Fei was not exaggerating.

In today's manufacturing plants, if there is a problem in one of the intermediate links, if there is no spare tire, all the subsequent processes will have to be stuck there.

Wu Gong didn't know if he had been in a car accident or had suffered a knife wound, he really had a centipede-like scar on his face, and the whole person looked gloomy.

He looked Gu Fei up and down for a while, and asked gloomily, "Do you know how much a CNC lathe costs?"

Gu Fei was stunned and then shook his head, he really didn't know.

Wu Gong's eyes widened.

He had just had a quarrel with the director of the counting department a few days ago, and now the entire first floor is almost out of work. Coupled with the hot weather, I can't help but want to get angry when I hear the words CNC lathe.

He couldn't help but slap the table and yelled, "I also graduated from college, don't think I don't know what kind of play college students are now." Do you think you can touch the car casually? If it is broken, will you pay for it or will you repair it? Since you have applied for a job as a handyman, you can take me to the warehouse to move the goods. The personnel side doesn't know that it's dry, so they know that they are recruiting people who are out of proportion all day long. ”

Gu Fei snorted to himself, his face was calm, and he turned around to leave.

He knew in his heart that he didn't look at Wu Gong shouting happily, but seeing that the work on one floor was about to stop, his pressure was much greater than his own.

Seeing that Gu Fei was about to go out, Zhang Li, the clerk next to him, hurriedly stopped him. "Alas, Gu Fei, right? I'll take a look at the order. ”

Don't look at Wu Gong as the vice president of production in name, but basically it is the clerk Zhang Li who does the work. In addition, there is a monitoring of the manufacturing workshop in the office, Zhang Li occasionally glanced at it and knew that Gu Fei was not a person who was stealing and cheating. So I'm happy to give him a chance.

Wu Gong glared at him, but Zhang Li's face did not change. She flipped through the table for a while, opened a certain document and looked at it, then turned on the computer and printed out a drawing, and handed it over to Gu Fei.

She smiled comfortingly: "No one is born with it, so they can't go to school." Gu Fei first look at the drawings and estimate whether you can make them. ”

Gu Fei took it gratefully, and when he looked at it, he realized that it was a very simple thing.

In fact, even the most complex machines are made up of relatively simple parts.

As a top student, Gu Fei finished studying this CAD drawing early, and his grades were good. As soon as he got the basic drawings in front of him, he knew what this thing looked like.

Even if the entire machine assembly drawing is given to him, it is estimated that it will not be difficult for him.

Of course, the final assembly drawing cannot be shown casually, it is a trade secret. But this single small part diagram taken from the whole machine is the reincarnation of Edison, and he doesn't know what it was used for for 10,000 years.

Because of this, Zhang Li dared to show the drawings to Gu Fei, a temporary worker.

The thing on the drawing is called the revolver control positioning axis.

The name is very high, but it's actually very simple.

It's not big, about the size of a thumb. It looks like three cylinders of different sizes and lengths connected together.

Gu Fei was a little surprised when he saw the specific size.

Although the thing is not big, the size requirements are very delicate. There are two tolerances on the three cylinders, and they are all plus or minus three wires.

Chinese people often use the word "no difference" to describe two objects that are very similar, and the difference is very small. This silk is the "silk" above.

In ordinary industrial manufacturing, not to mention centimeters or millimeters are too large, but nanometers and the like are too small, so the predecessors introduced the unit of silk, which is equal to 0.01mm.

Normally, the thickness of an ordinary A4 paper is about 5 wires, and it is conceivable that the tolerance requirements of the three wires on it are quite embarrassing. In particular, the material is softer, such as aluminum, basically with a fingernail on the top, one or two threads come out.

However, the material on the drawing in front of me is okay, it is No. 45 tool steel.

"How's it going, are you sure?" asked Zhang Li.

Gu Fei subconsciously looked at Wu Gong, who had a gloomy face, before he responded to Zhang Li with a smile on his face, and said, "I have to go back and ponder first." ”

Wu Gong didn't raise his eyelids, shook his hand casually, and motioned for Gu Fei to leave.

Zhang Li hurriedly spoke, "Gu Fei, I haven't stamped it yet, which means that the production department hasn't given you a production notice." If you do make a product, you must come back to me. Otherwise, you can't start the machine for large-scale production, you know?"

Although Gu Fei was surprised, he estimated that this was the factory rule, nodded and left directly.

As soon as they entered the manufacturing workshop, the employees of the several vehicle departments looked over with dark faces. Before they could speak, Gu Fei clutched his stomach and rushed to the toilet with a painful face. Leaving behind, a bunch of people cursed.