Still going on?

A bunch of vice presidents looked at the vacant seats after the vice president of the purchasing department was taken out, and their mouths were bitter and terrified. One by one, they quickly racked their brains to remember whether they had committed anything.

Before they could think of anything, they just heard Gu Fei's loud voice.

"Mr. Fang, I am only a shallow learner, and I only think of these reasons for the time being. ”

It's over?

The person in the room looked up sharply, almost thinking they had misheard. As a result, when I saw that there were all people looking at each other, I couldn't help but breathe a sigh of relief.

Fang Xiuzhu nodded, he leaned on the backrest with his hands around and said with a joking smile: "I suddenly found that the vice president of my entire conference room is all civil officials." All of them will only talk about things, and will not have the slightest technical ......"

As he spoke, he smiled and swept around a bunch of "civilian" vice presidents with unbearable faces, and continued to ask Gu Fei: "Here Gu Fei, you know some technology." Tell me, if it were you, what would you do with this mess right now?"

Gu Fei couldn't help but breathe a sigh of relief. When it comes to management experience, he is a rookie, he only knows how to rush forward, and when it comes to technology, that is his real ability.

"Then I'll tell you what I think. Gu Fei did not shirk.

Fang Xiuzhu nodded: "Say it." Everyone also listened to the high opinions of our technical department. ”

Gu Fei smiled, he pondered for a while before he spoke: "Now the profile has been cut into 18 tons, and it is too wasteful to recycle it as a waste product."

We can carry out orthopedic correction, that is, design a small machine, so that it can correct the deformation degree of the profile as much as possible without damaging the heat sink, so as to meet the company's flatness requirements.

I estimated that if this machine is well designed, we can save at least five to sixty percent of the profiles that are not very deformed. ”

A bunch of vice presidents and even Fang Xiuzhu above were in good spirits.

Can it save 5 to 60 percent, and how long does it have to recover the loss?

"Gu Fei, what is the name of this machine, can it be bought outside?" someone hurriedly asked.

Gu Fei was stunned, he spread his hands and said, "I don't know what such a machine is called outside or whether it is sold or not." But I don't think it's ninety percent of the time. ”

He explained: "After all, this infrared radiator is a product designed by our company itself, and people outside must not have nothing to do to design such a machine." ”

Fang Xiuzhu nodded, and he looked at the vice president of the design department: "This matter will be handed over to your design department and Gu Fei." You communicate more and get it out as soon as possible. ”

The vice president of the design department looked embarrassed, he opened his mouth, and in the end he nodded in response. Just after half a ring, he couldn't help but ask Gu Fei out loud: "Gu ......"

The vice president of the design department didn't know Gu Fei before, and he didn't know what his position was. As soon as he opened his mouth, the word "Gu" was stuck for a long time, and he couldn't take care of the reason, so he had to give up the title and go on directly.

"Design is not an easy task. If you say this casually, do you have any design ideas? If you have it, it's okay to say, if you don't, don't talk about it, our design department is very busy!"

"Yes. Gu Fei didn't hear the reproach from the mouth of the vice president of the design department, nodded and said, "I've been thinking about this for the past two days. The main mechanisms of the machine have been erected. After calculating some load-bearing and stress-bearing conditions, the design is almost complete. ”

The vice president of the design department was confused, but he finally breathed a sigh of relief and hurriedly patted his chest in response. I almost didn't say that you Gu Fei don't have to pay attention to it, this thing is all on me.

Gu Fei nodded lightly.

Fenghuo Laser Technology is a light industry enterprise, the designers of the design department have almost no contact with heavy industry, and many people even only draw CAD drawings to design the appearance of the product to make it look more fashionable.

Most of them ignore the problems of heavy industry, such as material danger points and load-bearing limits. This design was handed over to them, and Gu Fei was really worried that they wouldn't be able to figure it out.

But this is not the time to talk about that. Gu Fei continued: "The above is aimed at profiles with small deformation. Of course, large deformations can also be corrected by this machine, but the effect will not be too good. What about the rest of the ones that can't be corrected?"

"Yes, what should I do?" A bunch of vice presidents couldn't help but be brought to the rhythm, and thought about it one by one.

However, if a bunch of them who don't know technology can come up with a way, then Gu Fei and their skilled jobs will have no way to live.

"We can modify the entire radiator. Gu Fei's words were astonishing.

"What does this mean?" said Osha.

There were too many radiators installed on the third floor below her and the fourth floor above. Gu Fei changed it casually, which might bring them a lot of trouble or even trouble.

Gu Fei gave Ou Sha a calm gesture and said: "Everyone knows that the function of the radiator is to dissipate heat, and if the bottom surface is too deformed, the effect of heat dissipation will be lost. We can't correct it, we can fly it on the machine.

You should know that the machining center on the first floor, a knife flies over, what is the flatness of 15 wires required by the company, and it is easy to ensure that it is below 2 wires. ”

The conference room was dumbfounded.

The vice president of the design department is the vice president of the design department, and he knows a little bit. He said suspiciously: "Flying a knife can ensure flatness, but the whole product will become thinner and shorter, not to mention the locking problem, and the heat dissipation performance will also be reduced." ”

Gu Fei nodded and said, "Not bad, so in order to ensure heat dissipation efficiency, the corresponding fan has to be changed to a stronger one, and at the same time, pay attention to silence." ”

A bunch of people pondered for a while, but they didn't know if it would work, so they silently kept silent.

Gu Fei looked at the circle of people and continued: "Speaking of which, I would like to give a suggestion to the design department and the procurement department. Well, there is no purchasing department for the time being. ”

The vice president of the design department had a dark face and had to struggle to stand up again. He squeezed out a smile and asked, "Tell me, we will accept good suggestions with an open mind." ”

Gu Fei didn't care, and said with a smile: "In the future, when your design department provides the drawings to the purchasing department, it is recommended to take a look at our first floor and take a sample." ”

The vice president of the design department had a very ugly face.

Design proofing can also be understood, send a drawing to him on the first floor? This shows that he does not trust the design department, so that the designers under him are embarrassed!

Gu Fei seemed to see his entanglement, and said with a smile: "I was just joking just now, Vice President, you have a lot of adults, so you won't hold on to it." ”

Gu Fei thought for a moment, "That's it." I hope that in the future, when the design department provides procurement drawings, although there is some margin. In particular, there must be enough margin for key size positions.

Whether it is deformation or other to buy such a profile, as long as there is a margin, our machining center can be corrected, although it is a little troublesome, but it is better than scrapping. ”

"In the past, the company was outsourced, and I was not familiar with how we purchased raw materials. With this lesson, I believe that my colleagues in the design department will add some margin to the drawings passed on to the purchasing department and make adjustments. ”

I x!

After Gu Fei finished speaking lightly, the vice president of the design department seemed to have thought of something, but his face changed drastically as if he had been struck by lightning. He didn't care to explain anything, and thumped away from the chair under him, and rushed out of the conference room.

Everyone in the conference room was stunned, and everyone didn't understand what was happening, and then they only heard the voice of the vice president of the design department outside the conference room, who was anxious and even angry.

"You immediately stop what you are doing, don't ask why, and immediately review the drawings sent to the purchasing department. Always press the purchase order that was sent out, hurry up, go and do it immediately......"

A bunch of people were dumbfounded, and they turned their heads stiffly to look at Gu Fei.

Gu Fei shrugged his shoulders and said helplessly: "It is estimated that his design department has sent some drawings that will purchase a bunch of defective products?"

A bunch of people were speechless, you looked at me and I looked at you, silently wiping their sweat.

After half a ring, the vice president of the design department pushed open the door of the conference room and walked in sweating. The erect back has become a terrible fistula.

He stared at Gu Fei, who was the only one standing in the entire conference room, for a long time, sighed, and walked back silently.

"Mr. Fang, my design department is not thoughtful. The vice president of the design department looked at Fang Xiuzhu, who was sitting flat in front of him, with a bitter expression, "I admit punishment!"