Tian Zhongqiu turned around and left after returning the key directly to the pool, and Zhao Chili now saw Tian Zhongqiu, tears flowed down uncontrollably, and he felt aggrieved. Pen | fun | pavilion www. ｂｉｑｕｇｅ。 ｉｎｆｏ

The key fell into the pool water along a graceful arc, and Zhao Chili also squatted down again after crying for a while.

The pool water is not as many as Zhao Chili's tears, Zhao Chili squatted in the pool and picked up the key aggrievedly, unwilling to face the cruel world outside, but in the end he was suffocated and panicked, and cried again after surfacing.

Tian Zhongqiu didn't feel that he was bullying Zhao Chili, he was obviously teaching the other party a lesson!

Let your sister not be long-eyed, you really think I'm a bully, right?!

After returning home, Tian Zhongqiu didn't care about Zhao Chili's matter, anyway, it would be good if he didn't admit it when the time came.

Zhao Chili definitely can't check the injuries on his body, and Tian Zhongqiu has witnesses, and the people who peep outside can prove that they didn't hurt Zhao Chili, plus Tian Chili's usual words and deeds are very inconsistent with what he did before, so everyone will definitely regard Zhao Chili's framing as a frame.

Beating people is not something worth showing off, and for Tian Zhongqiu, teaching Zhao Chili will only spoil his good mood, so it's better to have some fun at this time.

Between playing games and going to the forum to fish, Tian Zhongqiu chose the latter, and sometimes it's interesting to watch some people show off their IQ.

Because of the relationship between frequent fishing, several accounts of Tian Zhongqiu on the forum have been blocked, Tian Zhongqiu always has a way to make the people in the post stand up across the screen, all kinds of harmonious and discordant texts are all revealed, and sometimes they often involve some sensitive topics, so they are listed as the biggest saboteurs by the moderators of the major plates, forever sealed!

Tian Zhongqiu likes to find a crowded place to sprinkle bait and fish, and this time he went to a forum that is known as a concentration of domestic intellectuals.

When he was bored, Tian Zhongqiu used the machine to register a lot of accounts, and the IP is definitely everywhere in the world, and it will never let people contact each other, and the accounts here are naturally there.

"What's the best post?"

Because the main thing is to find some people to relieve his mood, Tian Zhongqiu is naturally looking for someone who can amuse him, and after thinking about it for a while, he published a post to fish.

"Japanese Screws, Ming Kingdom Admires"

Content: I've always heard that Japan's industrial technology is very good, but this year I really experienced this firsthand, and a screw can actually reflect Japan's industrial technology. To tell a story, in the late 90s, a military factory switched to civilian cars, and negotiated with the Japanese side to introduce models at that time. At that time, the Chinese military designers felt that the Japanese drawings were very simple, and China should be able to easily produce them locally. The result is very different, all the parts of the car, if all the domestic standards, the failure rate has increased significantly. One screw accounts for a large percentage of the problem.

In a car, thousands of screws and nuts are used, most of which are universal standard parts, that is, fasteners that meet national standards. China's national standard code is GB, and the requirements for standard parts are no different from Japan's JIS standard. The production of mechanical parts cannot be like the national standard, which stipulates that the measured index of the parts must be within the specified range.

For example, the tolerance range of the outer diameter of an M6 screw is specified between 5.974 mm and 5.794 mm, and there are clear regulations on the inner diameter, pitch, material, surface treatment and other indicators. In Japan, it is almost impossible to find standard parts that do not meet the regulations, and the parts that do not meet the requirements cannot be sold at all. Therefore, after continuous efforts, the relevant manufacturers have almost eliminated the appearance of defective products from the production stage. In addition, through full competition, standard parts in the Japanese market are very cheap.

Looking at the Chinese market, it can be said that there is no model of standard parts that cannot find substandard products. Some vehicle manufacturers purchase parts in the market and come back, only after passing the full inspection, but they cannot eliminate unqualified parts. In order to ensure the quality, the joint venture automobile factory of the well-known brand can not purchase parts from the market, so it has to be customized, from raw materials to surface treatment, tracking down along the way, the small screws and nuts have cost a lot, and other parts are also the case, accumulatively, the cost of the whole vehicle has increased.

When I was a child, I always played in the military factory where my father worked, and the screws in my impression were very insignificant little things, I remember that when I played in the factory, there would be a lot of screws thrown on the ground every day, and I would take them to play, and I felt that this thing was like a match used when I was a child, and I could light a fire, and there was no concept of good or bad. But this time I looked at the cutting test and found that the original process quality was reflected so thoroughly through a small screw, according to the introduction of the staff later, the small Japanese screw that shocked the whole factory has a history of more than 100 years, which is the best place in the Japanese industry.

After the post was posted, Tian Zhongqiu's mood was much better, and he went to make himself a cup of tea, and when he came back, he saw a screen of fish hooked.

Ground floor: The landlord is too young to know something. It's not that Mingguo can't do well in screws, and a good enterprise can't survive at all!

2nd Floor: In the early 80s, I was doing car repair, and I liked to repair Japanese cars the most. The screws of Japanese cars are basically not corroded, and they are very easy to disassemble and assemble. If you loosen it with a tool, there will be a crisp sound, and you can unscrew it by hand, unlike domestic cars, where there are often screws that cannot be screwed. I have to say that Little Japan's things are very exquisitely made, and people who are not in the industry will not know about it.

3rd Floor: I have been making German parts for three years, and the Germans are really strict and often tell me: 'How much do you need to achieve the quality I demand?' Most of the domestic enterprises only care about the price and ignore the quality. It's time for introspection.

Fourth floor: Japanese bicycles, normal riding for ten years do not need to move, Mingguo bicycles, at most three months, the faucet, the central axis began to loosen, the flywheel began to swing, how to adjust it.

Fifth floor: Trolls who boycott Japanese products come out and take two steps!

Sixth Floor: I can't say forever, it's a bit too much. But within a few hundred years, the Ming Kingdom will definitely not be able to surpass others.

Seventh floor: I drove a truck, the domestic screw broke once in a few days, and then I went to an auto repair shop, and they found an old screw removed from an old Japanese car and replaced it, and it never stopped. Do those trolls know the quality of Japanese industry? The bearing industry would rather use the old bearings picked out of Japan's imported garbage than the new bearings made in China, because the domestic ones will soon break down.

Eighth Floor: Face the reality! We must study with an open mind! If you don't face yourself squarely, you are rubbish! It has nothing to do with whether you are patriotic or not

Ninth floor: This problem is not a simple screw, it is a country and society, everyone's attitude towards being a person and doing things~! The Japanese feel ashamed of those who do not speak honestly, do not do things well, and do not serve well......

……

"I'm laughing to death!" Tian Qiu couldn't even drink the tea, looking at the reply below, it really fully showed the IQ of some keyboard players, "These pig brains, saying that the pigs have insulted the pigs, can your sister look down on the world's second largest economy so much? Can you look down on your own military power so much? What kind of IQ can you belittle your own victorious country and praise a defeated country?"

My stomach hurts when I laugh, and it's really fun to fish when I'm bored.

Tian Zhongqiu smiled and continued to browse, wanting to see where the lower limit of these people was.

The thing in the article is more than 30 years ago, and it's a fictional joke, and a joke from 30 years ago can catch a lot of fish, it seems that this forum is really very happy.

Tian Zhongqiu has also done machinery, anyway, he doesn't know when there will be such a high-end and high-grade screw.

The following reply is very joyful, Tian Zhongqiu has already seen who the main audience of this forum is, it is really worthy of the forum where "high intellectuals" gather, and the style and heritage are different!