Humen is more prosperous than Xintang, because it is close to the mouth of the Pearl River, the scale of maritime trade is much larger than Xintang, in fact, Xintang's operation is somewhat single, and Humen is a place where people have nothing to say. Pen, fun, pavilion www. biquge。 info Whether it is denim, knitwear, down jackets and other kinds of clothes or the real thing, fake; Licensed goods, parallel goods, can be found here to buy and sell.

The fact that Liu Si's influence on Humen is not very good, the brighter the place, the more darkness there is, the more prosperous the place, the more dirt and dirt are hidden.

"Let's go find a place to stay first." Liu Si gave an order, and a group of two cars drove towards the center of Humen.

It took more than 10 minutes to get the accommodation, and after lunch, Liu Si led everyone towards the garment factory industrial zone in Humen.

In Liu Si's initial planning, Semir Clothing adopted a virtual business model, and opened a denim garment factory in Xintang for fear of leaking clothing style models.

In the recent expansion of the deep width strategy of Semir Apparel, it has been determined that various series such as T-shirts, shirts, women's dresses, shorts and other series will enrich the Semir brand, but T-shirts, shirts and other series of Semir Apparel will also open related garment factories one by one, so the funds are likely to be broken or even insufficient.

Semir Apparel Liu Si recently believes that there should still be some insistence, that is, the use of virtual business model to operate. Perhaps the clothing design model of Semir Apparel will be leaked, but it also avoids the defect of insufficient funds.

It is particularly important to determine the business strategy of virtual operation and choose an agent factory. Although the virtual operation will leak the company's clothing design model style, if you choose a reputable agent factory, you can avoid the embarrassing situation of leaking the model style caused by the company's clothing has not yet been listed, and copycat clothing is all over the market.

Spent 1,000 yuan in the market to inquire about the information of some medium and large garment factories in Humen, and finally there are only more than 10 to choose from in Liu Si's heart, the bosses of these more than 10 garment factories are all in the 80s to work in Humen to lay a huge foundation step by step, to be able to lay this foundation from scratch, naturally they all have a good reputation and excellent technical quality.

There is no communication with the various garment factories in Humen, so there is only hearsay about the credibility of each garment factory. It's the mid-90s, and the atmosphere in China is still very good, so Liu Si is not entangled in the issue of credibility.

The credibility problem is not visible, but the technical and quality problems of the garment factory are visible to the naked eye. The technical quality appraisal of clothing is mainly identified from five aspects.

The appearance of the costume. The clothing should be neat and flat, symmetrical left and right, folded and upright, ironed flat in all parts, no leakage and ironing, no dead folds, and the product has no head and no yarn. The thread is suitable for the fabric, including color, texture, fastness, shrinkage, etc., and the two should be roughly the same, so as to ensure the internal quality and appearance quality of the garment. The color of the buttons should match the color of the fabric.

The size of the garment. The setting of clothing models must be carried out in accordance with the relevant provisions of the "clothing model series" standard. Specifications are limited to the tolerances allowed by the standard.

Color difference of the garment. Chromatic aberration is a requirement for clothing fabrics. According to the provisions of the national standard on color difference, the collar, bag fabric, and side seam of the pants are the main parts, and the color difference is higher than the fourth level, and the other surface parts are the fourth level. The color difference test of clothing is borrowed from the "color fastness fading sample card". This sample card is one of the national standards formulated by the former Ministry of Textile Industry. The sample card consists of five pairs of gray standard samples, divided into five grades. Grade 5 has the best fade fastness, the color difference is equal to zero, grade 4 to grade 1 is the degree of relative increase in fading, and grade 1 is the most serious.

Defects in clothing. The standard stipulates that only one defect is allowed for each individual part. That is to say, if there is a defect on the piece of clothing, there should be no more defects on the patch pocket and cover in this independent part. The types of defects vary depending on the fabric. The judgment shall be made in accordance with the provisions of the standard. The independent part is the area divided into four areas: 1, 2, 3 and 4 according to the main part of the piece. Each part is an area on the garment.

Sewing of garments. In the stitch density, the stitch distance of the open line (including the dark line without the bright line) is specified, and the stitch distance is 14-18 stitches per 3cm. There are many varieties of fabrics, in order to ensure the appearance and firmness of the product, different fabrics should choose different stitch lengths. For example, the stitch length of hard fabrics can be a little thinner, and the stitch length of soft fabrics can be a little denser. The line of the sewing part is not allowed to be bent casually, and it must meet the needs of the shape of the garment; The line should be neat, not overlapping, no skipping stitches, throwing threads, the stitches should be clear and good-looking, the sewing start and end return needles should be firm, the length of the head line should be appropriate, there should be no missing needles and threads, and the elasticity of the stitches should be suitable for the thickness and texture of the fabric.

Liu Si naturally didn't understand the technical quality appraisal of clothing, so he brought Wu Ke, who had no painting skills but was a veteran of the garment industry, in Xintang, and he had some understanding of the technical quality appraisal of clothing, which is said to have been learned from Zhang Xiao.

It took two days to finally select two garment factories as agents of Semir Apparel, namely Yongkang Garment Factory and Baiqida Garment Factory.

After determining the agent factory, Liu Si did not place an order, because the model styles of Semir clothing's T-shirts, shirts, women's dresses and other series of products have not yet been made, and at most they only exist on the rubbings made by Liu Si himself.

The agent factory has been inspected and selected, and it is only necessary to draw the model clothing on the rubbing drawing gourd to make the model clothing, and it only takes two weeks for Semir clothing to open.

Thinking that time waits for no one, Liu Si spent more than 60 yuan to buy a 400-square-meter façade in the center of Guangzhou, and began to decorate it in advance, so as not to wait for the decoration of the store after the clothing is made.

In later generations, the decoration style of general brand stores is similar, and they all pay attention to simplicity, generosity and modern fashion. In 96, there are not many decoration styles in this brand store in Guangzhou, and all the brands that exist are foreign brands, but most of the clothes in these stores are extremely expensive.

For the decoration of the first Semir clothing store Liu Si is very attentive, with a gold finger to download a lot of decoration pictures on the Internet, according to these successful cases to decorate, spent more than 10 yuan, more than 1 month, fortunately, after the decoration Liu Si checked, giving people a sense of modernity, fashion is very strong, he is very satisfied.

And time passes imperceptibly!