Volume II begins with 231 Initiation II

The above is pure nonsense, and now I will start to explain the real reason......

The standard cockpit is a symmetrical and somewhat curved square as a whole, and consists of a cabin door, cockpit armor, and a dashboard, display, and seat in the cockpit. Pen @ fun @ pavilion wWw. ｂｉｑUｇE。 ｉｎｆｏ

The hatch has only one layer of armor, and the armor thickness is thicker, which is mainly used to protect the safety of the cockpit and the driver. The hatch opens at a 90-degree angle from top to bottom, at right angles to the upright angle of the fuselage, and when the hatch is opened, this thick layer of armor provides pedals for the pilot, allowing the pilot to enter and exit the cockpit easily and quickly.

When the cockpit is opened, a pedal for the pilot to step on extends from the cockpit of the aircraft to the feet of the aircraft; If the pilot wants to land in the cockpit, he needs to use his ID card to scratch over the raised connector on the ginn's foot so that the pedals can be extended for the pilot to get on and off.

Why bother? After all, on the battlefield, if you face a sudden emergency operation, you still need to draw a card to land on the airframe, which is a waste of time...... But as I mentioned earlier, it is mainly used as an identity certificate, if you don't have the right identification, then the cockpit won't open, and you won't be able to get in; This prevents the body from being accidentally taken by other personnel.

Well, to be honest, this feature is not really important, after all, if it is a mass production machine, and it is equipped with this kind of identity verification function, the cost will be much higher, so we will not use this function when producing mass production machines; However, this GINN is only a prototype after all, so considering its uniqueness, it has been given a verification function equivalent to a lock, so that this GINN can only be driven by Artoria, and no other personnel can ride this GINN.

Originally, we had considered the gene lock, but the cost of making the gene lock was a bit too high, and the related accessories that needed to be made were also quite troublesome, so we could only use this method of swiping cards first; It is worth mentioning that when the pilot leaves the cockpit, the cockpit will automatically close until the pilot draws the card again, and the cockpit will open and extend the pedals to the feet of the aircraft for the pilot to get on and off.

To get back to the point, when Artoria walked into the cockpit, she couldn't help but be a little stunned when there was no monitor, no lever, no instrument panel, just an empty seat; During the simulation training, she was directly in the cockpit, so Artoria had not practiced how to re-present the hidden operating parts.

Fortunately, we have also returned to the cubicle at this time, and from the screen of the monitor, we can see that Artoria is staying in the cockpit stupidly, and she didn't think about sitting in the seat first, which made us cry and laugh, Kong Wanying still smiled and reminded Artoria: "Your Highness Artoria, please sit on the seat first, fasten your seat belt, and I will tell you the next steps to start Ginn." ”

Artoria heard Kong Wanying's prompt from the test site, nodded her head to show that she understood, and quickly walked to the chair, turned around and sat down; Reaching out and pressing a button in the direction of her shoulder, Artoria pulled out the seat belt, which was the upper part of her body, and the seat belt on the waist side was pulled out of the armrests on both sides and tied around her waist after Artoria fastened the upper part.

If you just look at the surface, you will see that the upper body of Artoria at this time is fastened by two seat belts in the way of X; The waist restrains Artoria's slender waist, and in Artoria's abdomen is a piece of alloy, which serves as the connection part of the entire seat belt, biting the upper two seat belts tightly in the upper interface, and the left and right seat belts are bitten on both sides; This form of seat belt can be fixed to the driver's seat to maintain the driver's body balance, so that the impact force of the collision does not affect the driver's movements.

If you need to release the seat belt, you only need to press and hold the green button in the center of the belt alloy buckle for about three seconds, and the seat belt will release itself and retract back.

The seats in the cockpit are soft and comfortable to sit on, and will not cause a great sense of fatigue due to long-term sitting, which will affect the driver's continuous combat ability; So when Artoria sat on the chair, the soft comfort made Artoria exhale softly, and for a moment she thought she was sitting on the sofa chair in the living room of her home...... It's just that the chair won't trap Artoria in it.

"What's next?" Artoria asked, after fastening her seatbelt and enjoying the soft and comfortable seat again; Although Artoria was speaking into the air, we in the compartment could still hear it clearly, so when Artoria asked, Kong Wanying smiled and said, "Your Highness Artoria, now please insert your ID card into the card slot on the right armrest." ”

As she said this, Kong Wanying also used her hand to draw a straight line on the screen of the monitor, and the place where the straight line appeared was where the card slot on the armrest on the right side of the seat was located.

Although Artoria couldn't see the straight line that Kong Wanying had drawn on the monitor, she could easily see the card slot after sticking out her head to look at the handrail on the right; Seeing the card slot, Artoria took the card out of her pocket and inserted the side with the serial number printed on it above; This step had also been done in the simulation, so Artoria was familiar with it.

"It is worth mentioning that under the right handrail of the physical machine, a cassette is installed, and when the detonation system is called, the cassette will automatically pop up; The driver can enter the password set by himself when he drove for the first time, so as to achieve the purpose of allowing the body to start self-detonation at a regular time, so as to prevent the leakage of the body's technology; This system is usually only available to prototype mechs, but it is also available for production models, but it is used to kill enemy mechs and actively pull out of the cockpit. ”