Chapter 163: Shooting Test Next

The second composite steel plate is disassembled, the first layer is penetrated, the second layer is penetrated, and the third layer is penetrated...... Penetrate all the way to the twelfth floor. Pen @ fun @ pavilion wWw. biqUgE怂 ļ½‰ļ½Žļ½†ļ½

"It's just that after advancing two hundred meters, it has penetrated five more layers, and these steel plates are the strongest of our post barracks, so I didn't expect to be so unbeatable in front of this kind of shell."

"Yes, this is the steel plate used to make the front of the ironclad car, is it not strong and can it work?"

The second plate was much more damaged than the first, not only with every bullet hole severely damaged, but more importantly, with a slender perforation in the splint.

"What's going on with this piercing?" A technician went around to the back of the splint and found a needle as thick as an index finger piercing through the steel plate to reveal the head, and a large scorched black part appeared near the needle.

"Come and see, what's going on?"

Several other mechanics approached.

"I think I've seen this sharp needle somewhere." Haruto Shigeta is involved in many manufacturing processes, and he is familiar with the newly developed shells.

"Let's take it apart and take a look."

So a group of people dismantled the sandwich panels layer by layer, and the first few layers were unexpectedly full of wrist-thick dented bullet holes, and the ninth layer began to melt down, indicating that there was a high temperature here. The closer this phenomenon is to the twelfth layer, the more pronounced it becomes.

The next thing they noticed was that the shell had only penetrated the twelfth layer, but the sharp needle at the tip of the warhead continued to penetrate until the end.

Seeing this scene, Haruto Shigeta reacted the fastest: "I know, the design of the adult is to hope for a second shot, the first time the air gun cannon pushes the shell through the steel splint, and then due to the extremely fast speed, after the needle is squeezed by impact, the explosives inside are detonated to produce a secondary thrust, and the needle continues to penetrate while producing a fierce high-temperature explosion flame, which can spread along the gap of the gap." That's why those flammables in the middle of the splints burn out particularly badly. ā€

Technicians who can participate in the test analysis are not stupid, and after being reminded by Haruto Shigeta, they instantly understood this truth, and they were all amazed by this wonderful design.

"This kind of cannonball is completely designed to kill the target, even hiding behind the cover may not work, as long as the needle penetrates the cover, the ferocious flames will instantly engulf everything, even the flames of steel can melt, I don't think there will be anything that can't be burned." Some technicians expressed their fears that they would be able to kill the Stranger, and that the weapon would be used against their own people.

"Hahaha, this is what we want, no matter what the enemy is, it can be easily killed, can this weapon be mass-produced?"

The technicians were in a fever pitch and didn't know when Yamada would appear behind them, abruptly faced with the questions he asked.

"My lord, I'm afraid it's not going to work, only a batch of test products has been produced at present, and the drawings are still in the hands of the envoy."

"You mean you can mass-produce when you have the drawings?" Yamada then asked.

Haruto Shigeta, who had the most right to speak, thought for a while and said: "There should be no problem, these small shells are all produced with the machine tools we already have, and if you can give us the drawings, there should be no problem if you want to mass production." This kind of shell is not very difficult to manufacture, the key is that several core designs are very ingenious, and it is estimated that it will take a long time to rely on our slow exploration, and with the drawings of the envoy, we should be able to manufacture it quickly. ā€

Yamada was pleased with Haruto Shigeta's answer, and he could see how a mech equipped with a new invention was killing enemies with improved guns and powerful cannonballs. Both strangers and humans were reduced to scum in the roar of artillery fire.

The situation of the interlayers of the steel plates after that was much the same, except that the shells penetrated deeper and the meltdown was more serious. In particular, the two targets in the back were almost completely pierced by the shells, and they were able to see through the bullet holes. Yamada left halfway through, he could already anticipate the end, and now he has more important things to do.

When Yamada found Chen Wusheng, Chen Wusheng was organizing people to disassemble the steam mecha, although it would be more efficient for him to do it alone, but he didn't have time to train these technicians slowly, so he took advantage of the time to let them practice more. Ami Shida and his party watched from the side, and Chiwa Aoimi's Chijo Ling was one of the many technicians. Don't look at her as a girl, usually taciturn, but she does things unambiguously, better than the other technicians present.

"Your Excellency, Special Envoy, I have just watched your wonderful demonstration, which is really an eye-opener for me, and it is worthy of such an outstanding young man who can serve as the Special Envoy of Shenzhou at such a young age. Presumably, if you can make a successful trip this time, you will definitely be promoted and make a fortune after you return, and the future is limitless. ā€

Yamada complimented Chen Wusheng disgustingly for a long time, although the right is fascinating, it is not what Chen Wusheng wants. Chen Wusheng has not seen people like Yamada, in a word, he is attentive to everything, what the other party wants, Chen Wusheng can guess with his eyes closed, so why bother going around in circles with him.

Without waiting for Yamada to finish being disgusted, Ami Shida couldn't stand it first, she also guessed the purpose of Yamada's coming, in addition to coming over to grab the goods, what else could it look like?

However, in the face of this old minister, who was about the same age as his uncle, Shida Ami lacked confidence, and pretended to be strong and said: "Lord Wusheng, when will we be able to receive this batch of steam mechas, we will set off the day after tomorrow." ā€

Chen Wusheng was not interested in other people's housework, and he didn't have time to take care of it, so he told the truth directly.

"After this machine is disassembled and tested, it is much easier to do the other ones after confirming that there is no problem. There was no downtime of the production line in the machine room, and the tests on our side did not delay production in the rear. ā€

Chen Wusheng narrated while checking the information that had been summarized, and there was no ripple in his tone, as if he was doing ordinary things that were not enough to worry about. The surrounding technicians all looked at Chen Wusheng with admiration.

They didn't know that the puppet technology was already very popular and mature in the Shenzhou Continent, and they already had the current technology as early as a thousand years ago, and the people of the Shenzhou Continent had continuously improved and upgraded for a thousand years, overcoming many difficulties and overcoming many difficulties. What Chen Wusheng is doing now is just to extract a design suitable for the characteristics of Fusang's national conditions from the existing knowledge, and make a little more advanced to the finished product.

Of course, in Chen Wusheng's eyes, the steam mecha was just a toy to deal with strange ghosts, not a war weapon in his mind. The advantages of the steam mecha are not as significant as it seems on the outside, but there are fatal shortcomings, so he doesn't care how others praise and praise him, maybe he wishes that no one knew that these "toys" were designed and manufactured by him, because if the fundamental defects are not changed, the steam mecha will never be on the big stage.