"Can you call the shots?" Tian Ze looked disbelieving. Pen @ fun @ pavilion wWw. ｂｉｑUｇE。 ｉｎｆｏ

Millions of dollars in outsourcing fees! How can Zhou Tong, a workshop director, do the master? Li Zexin, chairman of the Red Star Machinery Factory, is about the same.

"I can't be the master, but my brother-in-law Li Zexin can! When I came, he had already delegated authority to me, and I had full authority to handle the matter, so you can rest assured of this. Zhou Tong patted his chest and reassured.

Now, Tianze understood.

Zhou Tong is fooling him!

Tianze didn't believe that Li Zexin would be so stupid and give away millions of dollars in outsourcing fees for nothing. The reason why Tianze opened his mouth just now was just to tease Zhou Tong, but he didn't expect that what Zhou Tong thought of was not bargaining, but directly had bad intentions.

"Good! I'll do the work. ”

Tian Ze said with a smile.

"Great, let's go to the factory now." Zhou Tong said excitedly.

"Okay!" Tianze nodded.

went to Grandma Sun to pick up Lele, Tianze drove his own Daben and left first. Zhou Tong looked at Daben's butt, was stunned for more than ten seconds before he came back to his senses, opened the door of a Beijing Hyundai led by him, and disappeared into the traffic with Daben.

An hour later, the two cars came to the advanced manufacturing base in the east.

It's a huge industrial cluster.

With the large industrial zone and Biling High-tech Zone as the core, it integrates Shabai, Tiantou, Jinsha-Shatian Industrial Zone and Shengsheng Pingshan Liulian Industrial Zone, and develops as an electronic equipment and chemical base.

The equipment industry focuses on the development of CNC machine tools, transportation equipment, electrical machinery, new energy, power transmission and transformation, precision machinery manufacturing, etc.; It also uses high-tech parks such as large industrial zones to vigorously develop high-tech industries such as digital audio-visual, IC manufacturing, biomedicine, and fine chemicals; In terms of traditional industries, promoting the agglomeration and development of advantageous industries such as furniture and bicycles is a key project promoted by the Shenzhen City Government.

The Red Star Machinery Factory is built in it.

Specifically, it is in large industrial areas.

……

With Zhou Tong's leadership, Tianze easily entered the Red Star Machinery Factory. Tianze did not go to the factory immediately, but came to the office area, and asked Zhou Tong to find a beautiful female clerk to accompany Lele to play, Tianze rolled out the drawings that Zhou Tong took out and studied it.

It has never been a simple task to produce parts, and the more complex the structure, the more complex the machining process. Specifically, the processing of a part can be subdivided into: preparation of raw materials, preparation process, blank manufacturing, machining and heat treatment of parts, and parts testing.

Among them, the preparation process is the most important.

To use an analogy, if you want to calculate 1+1=? , then you first have to know the law of addition, and the process is equivalent to the law of addition.

The parts processing process, rarely single, is composed of a number of processes arranged in a certain order, and the process can be subdivided into installation, station, work step, tool and other components. As for what is a process? The image point is that there are holes, bevels, grooves, etc. on a part, and the process is to arrange what machine tool to use to complete the part of the processing of the part first.

Tianze was looking at the parts drawings provided by Bombardier.

A valve drawing.

Don't underestimate this valve drawing, this is not the valve of the faucet, but the valve of the airplane door. Not only is the structure more complex, the material requirements are also high, the integrated aluminum alloy forging, requires a unilateral 3mm margin, a height of 5mm margin, and a zigzag surface roughness of Ra0.3, the difficulty lies in Ra0.3, which is almost close to the limit of special precision accuracy Ra0.2.

"Tianze, can you get it out?"

Zhou Tong said with a worried face.

"Yes."

Tian Ze said confidently.

"Are you really sure?"

Zhou Tong was pleasantly surprised.

"I said okay, don't bother me here." Tian Ze waved his hand impatiently, like chasing flies, and did not take Zhou Tong, the master, in his eyes at all.

"Okay, okay, I won't bother you." Zhou Tong didn't care at all, and said with a smile on his face.

After playing casually, Tianze picked up the banknote next to him and began to calculate, compiling the valve process. Because it is a private job, Tianze did not write according to the standard format, but how to write it conveniently, and many places also used ghost drawing symbols that Tianze himself could understand.

This busy work was two hours, and Tianze compiled an abbreviated version of the process.

"Tianze, has the process been compiled?" Zhou Tong came up again.

"That's it!" Tianze stretched out beautifully, and let Zhou Tong take the compiled process to check.

"Shall we experiment with one?" After watching it for a long time, Zhou Tong didn't understand the reason, so he could only return the process to Tianze.

Nonsense, Zhou Tong is a student of archaeology, although he has been the workshop director for several years, he can only understand some simple mechanical drawings, and he can't understand the complex ones, not to mention the process of adding materials to Tianze.

"Good! Let's go! ”

Tian Ze took the process and walked away, it was already more than five o'clock in the afternoon, and the sky had already darkened, if you didn't hurry up, you might not be able to make a part today.

……

When Tian Ze and Zhou Tong came to the No. 1 workshop, most of the workers in the workshop had already left work, leaving only a few cleaning workers.

"Master, you're here!"

A young man greeted him.

Tian Ze didn't even look at the young man, and walked straight to a lathe. This is a Swiss-made CNC lathe, Tianze started to program on the console after starting, and entered the program he had just written.

As for why Tianze ignored the youth?

There's a reason for that.

The young man's name is Chen Xiaolong, and he is still Tianze's apprentice, but this thing shamelessly betrayed Tianze and secretly helped Zhou Tonglai to deal with Tianze together. If it weren't for an accidental discovery, maybe until now, Tianze would have been kept in the dark. With Tianze's violent temper, he didn't directly give Chen Xiaolong a kick, it was already the sun that came out of the west, how could he give Chen Xiaolong a good look?

Chen Xiaolong looked at Tianze's back, and a trace of gloom flashed in his eyes.

Chen Xiaolong knew that the two would be passers-by from then on.

Is it really worth it?

Zhou Tong didn't care about the complexity in Chen Xiaolong's heart, and secretly pushed Chen Xiaolong and gave him another look. Chen Xiaolong hurriedly put away his complicated mood and nodded quietly.

A hint of joy flashed in Zhou Tong's eyes, and he strode to Tianze's side.

……

It took half an hour to compile the program, place the blanks provided by Bombardier on the CNC lathe, and then align the tools and start to perform processing.

With the muffled sound of the motor, the blank began to be cut at a rapid pace.

Seeing Tianze staring at the blank tightly, Chen Xiaolong couldn't help but sneak up. Tian Ze didn't care about him, and let Chen Xiaolong probe the processing of the workpiece.

After changing five knives, the blank was fully formed.

But the lathe did not retract.

It's still spinning.

"The system, the workpiece loaded into the machine." Regardless of Chen Xiaolong, who was bewildered next to him, Tian Ze summoned directly in his heart.

"Drop! Start onboarding. In a burst of electronic sound, there was an extra hologram in the blue three-dimensional space of the PS system, which was the valve hologram that had been made.

"Turn on scanning."

Tian Ze ordered.

Almost immediately, the PS system finished scanning, and the electronic sound sounded again, "Drop!" The scan is complete and the target is the mechanical part. ”

"Comparison with previously loaded part drawings." Tian Ze continued to order.

"Drop! Start the comparison. ”

"Drop! After the comparison is completed, after comparing with the parts drawing, the dimensional accuracy of the workpiece IT8-IT7 and the surface accuracy Ra0.5 do not meet the requirements of the drawings at all. "In just three seconds, the PS system completed the comparison.

"Turn on!"

Tian Ze said immediately.

"Drop! Enable the removal function, and the removal progress is 1% and 2%...... 99%, 100%, drop! After the removal is completed, the workpiece has met the requirements of the drawing. "In the cold electronic beep, the hologram of the workpiece began to change, and the surface could be clearly smoothed.

Of course, at the same time, there are also workpieces in the machine.

It's just that the glass is separated, so I can't see it clearly.

Chirping! The lathe compartment opened......

PS: Thanks. The reward of 100 starting coins and 200 starting coins of Heaven's Traceless Coin, by the way, ask for a recommendation ticket, I hope you will support the sun! It's too much different from the recommendation votes of the same book.