This process standard is of course very important, it represents a system standard, and it is no exaggeration to say that it is a country's programmatic guidance document for the future development direction of related industries. Pen % fun % Pavilion www.biquge.info

A forward-looking and well-considered standard can point out the correct development direction for the relevant industry, guide the industry on the right track, and drive on the fast track of development.

Qi Lei hurriedly gave Secretary Liang, Deputy Secretary Shang, and Du Haibo a rough introduction to what is called process standards.

For example, space shuttles, airships, balloons, jets, gliders, and kites can all be included in the category of aircraft.

If there is no standard, it is natural for the manufacturer to decide what to develop and how much money to invest.

This is disorderly development, because many ideas, limited to the level of materials and manufacturing at that time, can only remain on the design drawings, and there is no possibility of realization. Investing money, manpower, and material resources into these projects is a waste.

The disorderly development of the whole industry is a great waste, which makes the projects that need more investment not get sufficient support, and delays the speed of technological upgrading and promotion.

If a large-scale purchaser gives a procurement framework: it requires flight in the atmosphere, and there is no need to study the space shuttle, a tall product; If there needs to be power, then kites, gliders, balloons will be eliminated; In the end, the only target left was the jet.

As a result, any enterprise that relies on this large-scale buyer to maintain will also concentrate on the development and production of jets, and will not be distracted by space shuttles and gliders, and can invest more resources in it, focus on details, and make products more sophisticated and more superior.

The United States has been most successful in this regard.

They convened the best scientists and experts in the United States to consult, and in 1968 formulated the first set of MIL military procurement standards, with strict regulations for every part and component.

Due to the large volume of military products purchased and the high profits, a large number of suppliers have ended their disorderly development, taken the initiative to move closer to military standards, and adopted higher requirements and stricter production processes to produce electronic products in order to win orders for military products. A large number of advanced precision manufacturing equipment has been put on the market, which has made the industrial strength of the entire United States rise, not only surpassing the old rival Soviet Union, but also allowing European countries such as Britain and Germany to bow down.

This set of standards is strictly standardized, and the technology is forward-looking, which is unprecedented.

According to statistics, since the first military standard came out, the component manufacturing capacity of the US microelectronics industry has increased by an order of magnitude in three to five years.

The speed at which it is developing is jaw-dropping.

There are examples of the United States' own development, and the effect is so good, for the purpose of unifying the supply of military products, European NATO countries have successively regarded the US military standard as the standard for their own product procurement.

The country has been closed for a long time, and because of the lack of communication, it has repeatedly fallen behind in the process of catching up with the world trend. Every time I chased a section, I looked up and saw that they had run further ahead. Despite our best efforts, we see that the gap is getting wider and wider, so big that the majority of scientific researchers have a sense of despair.

It's as if we'll never want to catch up with someone else!

In this urgent mood, the domestic high-level officials, ministries and commissions, scientific research groups, and scientific and technological workers unanimously issued a call for formulating a scientific military standard and industry standard according to the current situation of our own strength.

In particular, the troops, which have extremely high requirements for product stability and quality, have really been unable to bear it anymore after the military industrial enterprises that were in chaos after 10 years later, supplying a large number of inferior military products to the troops, and the phenomena of guns exploding and shells not exploding one after another, and they have called for standardizing the production process of products, improving the quality of military production, and not using inferior products to make up for the number.

In peacetime, these inferior military products will cause the troops more trouble in training and exercises, and will be humiliated in front of the superior leaders.

But in wartime, it's fatal!

To put it mildly, a key battle may be a fiasco, because it is full of these inferior military products!

Just when the whole country reached a consensus and was ready to refer to the US military standard and formulate our own military standards, a test report on electronic devices in military divisions appeared in front of everyone.

Guanfei has successfully attracted foreign investment, and the establishment of an electronic industrial park by the Hong Kong government has attracted international giants to scramble, which has increased the attention of domestic parties. The Ministry of Electronics Industry and the Logistics Department immediately organized a group of experts to conduct a comprehensive evaluation of the components produced by the military sub-divisions.

The results of the assessment surprised all the experts.

The stability of the quality of the components of the military division is better than that of domestic military products, and its failure time, working limit in high and low temperature environment, working limit in humid environment, and anti-electromagnetic interference ability also exceed that of domestic products. According to the measured results, its electrical performance also exceeds that of domestic electronic components, meets the requirements of the standards published by the International Electrotechnical Organization, and is only lower than the requirements of the US military standard.

After receiving the test report, the Ministry of Electronics Industry was ashamed, but the military was overjoyed.

If we can produce qualified civilian products, we will not be far from producing military products that meet the standards. The military sub-district made its own production line, and the components supplied in batches gave the military hope.

For example, for printed boards, civilian products require 33 microns, while military products require 50 microns, or thicker, to increase redundancy. Sufficient redundancy can prevent the breakdown by strong currents during electronic countermeasures, and work normally in the complex electromagnetic environment of the battlefield.

Civilian products of 33 microns do not mean that the thickness can only be applied 33 microns, but there is no need to thicken them. Thickened copper foil needs to be plated multiple times, and the cost is not cost-effective. Anyway, most of the civilian electronic products are used in their own homes and in the case of an excellent electromagnetic environment, of course, they can be saved.

The technology that can produce 33 microns, and with a slight improvement of the production line and process, it will definitely be able to make 50 micron boards, there is no doubt about it!

At most, the defective rate is a little higher, the cost is a little higher, and the screening is a little troublesome, rather than completely unable to do it!

Even if some indicators can't be done, the distance is not too big, which has laid a solid foundation for clarifying the direction of R&D in China, saving R&D investment, and shortening R&D time.

In addition, all sampling tests, electronic products with the same product number, have the same process effect, and all electrical indicators tend to be the same. This proves that the military sub-division has a clear set of process specifications, requiring all component factories to comply with the specifications.

That's even more remarkable!

The consistency of electrical indicators is not for the sake of pretty, but practical.

With the same electrical indicators, components with the same number on electronic instruments can be easily called without having to reconsider filtering interference, making maintenance easier. The electrical indicators are consistent, and there is no need to test the components of different manufacturers when designing products, and design interference redundant circuits separately, just check the table directly, and the difficulty of system integration is greatly reduced.

This is of immeasurable significance to the massive consumption of wartime.

As the chief officer of the military intelligence department, Qi Lei has the authority to know the relevant information, and he has long wanted to talk to Guan Fei and get this set of process specifications from him.

Even if it is an incomplete version, even if it is not completely suitable for the situation of domestic electronic enterprises, it can also help China to expand and come up with military standards that meet our own reality as soon as possible.

He just asked on the side, who knew that Guan Fei would admit it calmly, as calm as he was, and he couldn't hold back the ecstasy in his heart, behaved out of shape, and immediately asked if he could transfer it.

"I was going to transfer this set of process specifications to China, but I'm afraid you don't want it." Guan Fei did not hesitate and immediately gave a positive answer.

Not to mention his feelings for the country, the importance of domestic support to the survival of the military sub-division in the cracks is also an indispensable and important link to the realization of his future goals!

In a corner of the military subdivision, there are less than 100,000 people, and no more than 100 factories.

In the future, if it is extended to the limit, it will accommodate a maximum of about 300,000 people, and it is impossible for all of them to be workers. There are thousands of factories, and most of them are medium-sized factories with one or two hundred people in terms of population.

With such a few people, such a factory, and so many industries such as chemicals, smelting, machinery, electronics, etc., it is reluctant to realize the production capacity of a certain complex equipment.

Large-scale mass manufacturing is even more fantastical.

How many years and months will it take to meet his minimum requirements and achieve his ambitions?

To this end, it is indispensable to make China an important part of the industrial chain. According to his plan, the military sub-district made rapid progress in the development plan of precision manufacturing technology. The proliferation of technology to support the country enables the country to produce a large number of complex external components that meet the requirements, which can then be assembled by the military divisions, which is a practical need from which both sides benefit.

It's just a mere process specification, how much is it worth?

This was originally the first version formulated in the early 90s in the original history, on the basis of our own seven-specialty system in the 70s, with reference to the US military standard. At that time, the strength of the domestic manufacturing industry was still relatively weak, and this system was roughly equivalent to the level of the mid-to-early eighties in the West.

At the end of the seventies, this set of specifications was slightly higher, a bit beyond the domestic manufacturing capacity, but also because of the reference to the technological development since the eighties, it also has a very objective guiding role in guiding the next stage of domestic technological development.

With this set of norms as a reference, I think that China will no longer put forward all unrealistic requirements, and it will be more economical and effective in R&D investment.

If he doesn't stretch out his hand at home, he has to find a way to give it to the other party.

He very much hoped that he would be able to promote the development of various industries in the country beyond their original history and develop them relatively quickly, and then the military sub-districts would also benefit from them, accelerate the pace of development, and approach his goal as soon as possible.

Receiving Guan Fei's affirmative reply again, Qi Lei's always serious face squinted with a smile, and he was extremely happy.

Poor and weak for too long, people in this era still have a real feeling about the strength of the country.

Dedicating oneself to the motherland, even if it is broken bones, there are definitely not a few people who have this kind of thought, but it is precisely the mainstream idea of society.

This is especially true for scientific research workers and soldiers who shoulder heavy responsibilities!

Guan Fei promised to hand over a full set of process specifications to China, which made him ecstatic more than simply inviting Qi Lei to a big meal and how much money he was given.

Guan Fei is indeed our comrade and closest comrade-in-arms.

Even though he went abroad and fought hard in the southwest jungle with his bare hands, he still missed the motherland and never forgot his country when he had good things.

Such a good comrade is worthy of strong domestic support!

It's a pity that he is only a military sub-district leader, not the general secretary of the Communist Party, otherwise the country would have spared no effort to give the greatest support, and even the return of the military delegation to the country is not impossible.

He looked at Guan Fei, his face was filled with happiness, and he made a rare joke: "You pulled us out today, maybe it was just to hand over this set of process specifications to us, right?" It's a shame not to be an intelligence officer! ”

"Of course not!"

Who knew that Guan Fei actually denied it, and then, in the midst of everyone's expressions, he lowered his voice and said solemnly in a whisper-like volume: "What I will hand over to you later is the latest body armor material developed by the US military, Kevlar fiber, as well as a complete set of process flow of alumina bulletproof ceramic insert plate, aramid bulletproof helmet, and related equipment manufacturing drawings!" ”

Although his voice was so low that it was inaudible, it was like a thunderclap, which exploded in everyone's ears, shaking their bodies and shaking slightly.

Even Guan Fei's guard Li Qing couldn't help but scream.

Qi Lei was so excited that his heart was about to jump out, his throat choked, half loud, and then he jumped out word by word and said: "Comrade Guan Fei! Thank you! ”

Looking at everyone's pious and happy expressions, Guan Fei wanted to smile easily, but he couldn't laugh.

The longer he is in this era, the more he blends in with the times, and the more he understands how much sacrifice and dedication the older generation has made for the country.

He's not a staunch guy, but he absolutely loves the country.

When he thought of the southern Xinjiang campaign that was about to start early next year, and when he thought of the countless more sons and daughters who had stained the battlefield with blood for the sake of the country, he couldn't help but feel tears in his eyes, and he couldn't help but feel that he could do something for these respectable brothers and comrades-in-arms.

However, where does he have any research and development achievements of the US military's body armor and bulletproof helmets.

Under the guise of the US military's research materials, the drawings he gave were actually a certain aramid fiber and casing material commonly used on the liners and bags of game consoles in the thirties of the 21st century. These materials are actually developed by China itself, and they were also used as bulletproof equipment materials in the early 21st century. Later, with the development of new weapons, these achievements were no longer sufficient to meet the needs of protection, and the military was converted to civilian use and civilian products.

Therefore, Guan Fei brought back to this era, the most important thing is not the advanced game program, game console design and manufacturing, ordnance and weapon structure, but the research and development principles, manufacturing equipment, and processing processes of various high-performance materials commonly used on game consoles in later generations!

With these materials that are ahead of the times, as long as their manufacturing capacity meets the requirements, Guan Fei is confident that he will be able to create knockoffs that are based on those famous weapons in history, but the performance is better than the blue, surpassing the original!

Material!

Material!

Or the material!

Materials above all else, are the cornerstone of all advanced designs into reality!

Without Kevlar, the personal protective equipment of the US military can only be a pipe dream; In the same way, with aramid fibers, we can create our own high-performance body armor without the R&D materials of the US military!

If it weren't for the fact that the manufacturing of these production lines was too complicated and involved too many interdisciplinary disciplines, the military sub-district would not have been able to manufacture them now, and he would have been put into mass production and supplied to China in large quantities.

It's a pity that the time for self-made development is still too short, the industrial base of the military sub-division is still too weak, and there are so many things to do, and it took too much time to copy these drawings, and it has been delayed until today that all of them have been completed. Rather than keeping it for itself to gnaw slowly, it is better to hand it over to the country, and the effect is even greater.

I just hope it's still too late!

Even if he can't catch up with the counterattack at the beginning of next year, he hopes to play a huge role in the future round of battles, so that he can feel at ease.

Guan Fei's thoughts fluctuated, and he reluctantly pulled the corners of his mouth, restraining his emotions: "It's nothing, this is what I should do." I only hope that after the technology is digested and restored in China, we can be given a set of production lines for free, and we can produce our own body armor, so that soldiers will not die in vain when fighting the enemy! ”

"No problem!" Although he knew that he should not promise lightly, Qi Lei did not hesitate to accept it.

"Comrade Guan Fei!" Secretary Liang looked at Guan Fei deeply, patted him on the shoulder with his big hand, his chest rose and fell sharply, obviously his mood was not calm, "Whether you are good or you educated young soldiers, you will not care about it in China." Don't worry, it's still the same old saying, if we have a bite to eat, there will be no shortage of you! I am not saying this as a branch chief, but as a pledge made as a veteran. I will also use my strength to help you as much as I can! ”

In the narrow elevator, everyone's hands are tight